Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Mountain View
Furnace repair in Mountain View typically runs $150 – $700, and most jobs are completed the same day we diagnose the problem. If your heat is out on a cold night, you need a technician who shows up inside the stated window, prices the job in writing before touching a screw, and stands behind the work for a full year. That’s exactly how we operate. Dalton Heating & Air serves Mountain View neighborhoods from Castro Street to North Whisman, and we answer the phone with a live person 24/7. Call (361) 306-9515 and you’ll talk to a real dispatcher, not a voicemail tree.
Why Dalton Heating & Air Is Mountain View’s Preferred Furnace Repair Company
Mountain View homeowners deal with a specific challenge: housing stock that ranges from 1920s bungalows near downtown to 2010s high-efficiency builds in North Whisman. A furnace that works fine in one house can fail differently in another three blocks away. Our Furnace Repair team has walked through enough Mountain View attics and crawlspaces to know the difference between a cracked heat exchanger in a 1960s unit and a tripped safety switch on a modern condensing furnace. That matters when the fix depends on the home’s era, ductwork, and load calculation.
Every technician who arrives at your door is background-checked, uniformed, and factory-trained to service nine major HVAC brands, including Goodman, Rheem, York, and Daikin. Before any work begins, you get the price in writing. After the repair, you get a written guarantee for a full year. If the repair fails within that time, we return at no charge. That’s The Garrison Standard, and it’s been in place since 2003. Marco Benitez, who leads our Mountain View operations, enforces it on every single job.
Furnace Maintenance in Mountain View
Furnace Maintenance in Mountain View costs $80 – $200 and should be scheduled once a year, ideally in early fall before the first cold snap. A maintenance visit includes inspecting the heat exchanger for cracks, testing the ignitor and flame sensor, checking gas pressure, cleaning the burner assembly, and measuring static pressure across the blower. In Mountain View’s mild climate, furnaces sit idle for months at a time, which lets dust settle and small problems turn into no-heat calls when temperatures finally drop.
What a Tune-Up Catches Early
We find failed capacitors and weak ignitors on furnaces that haven’t been opened since the last owner moved out. Mountain View has high-turnover rental stock, and a lot of equipment gets deferred maintenance. A $120 tune-up catches a failing capacitor before it takes out the blower motor, which would run closer to $500.
Static Pressure and Airflow
Older bungalows near downtown often have return ducts that were sized for a smaller system. When a newer, larger furnace was installed without correcting the ductwork, static pressure climbs and the blower works harder than it should. Our maintenance includes a static pressure reading, which tells us whether the system is fighting itself. That reading is part of every furnace maintenance visit.
Heat Pump Repair in Mountain View
Heat Pump Repair in Mountain View runs $150 – $650, and the most common call we get is a system that won’t switch between heating and cooling modes. Mountain View’s mild climate means a lot of homes run heat pumps year-round, and the reversing valve and defrost controls see more cycles here than they do in hotter or colder metros. When a heat pump fails, the fix is often electrical rather than mechanical: a bad capacitor, a failed contactor, or a control board that stopped sending the changeover signal.
Dual-Fuel Systems and Furnace Cycling
Many Mountain View homes have a dual-fuel setup: a heat pump for mild days and a gas furnace for cold nights. If the heat pump wasn’t sized to the home’s actual heating load calculation, the gas furnace ends up cycling on and off too often. That short-cycling drives up bills and wears down the heat exchanger. We test the changeover settings and the thermostat wiring to verify the system is using the right fuel at the right outdoor temperature.
Low-Pressure Switch Trips
On modern condensing heat pumps, a tripped low-pressure switch is a common winter failure. It’s a safety device that shuts the system down when refrigerant pressure drops too low, and it often gets misread as a thermostat problem. We check the refrigerant charge, the pressure sensor, and the outdoor coil for debris before we condemn anything. Most of these calls are resolved in one visit.
Trusted Brands We Service in Mountain View
Our technicians are factory-trained on Goodman, Rheem, York, and Daikin equipment, among others. Because Mountain View homes run such a wide range of makes and models, we keep common parts stocked locally: ignitors, flame sensors, capacitors, blower motors, and pressure switches. If we don’t have the part on the truck, we can usually have it by the next morning. That means less downtime for a home that’s already cold. We service both gas furnaces and heat pumps, and we work on equipment we didn’t install.
Common Furnace Repair Problems We See in Mountain View Homes
- Short-cycling in older downtown bungalows. Undersized return ducts force the blower to work against high static pressure, which trips the high-limit switch and shuts the furnace down early. It’s often misdiagnosed as a thermostat calibration issue.
- Failed capacitors in high-turnover homes. Rental properties change hands frequently, and furnaces often skip maintenance for years. A weak capacitor is the most common cause of a blower that hums but won’t spin.
- Cracked heat exchangers in furnaces from the 1960s and 70s. These units are past their expected service life, and a cracked exchanger is a carbon monoxide risk. We flag it immediately and give you a written repair-or-replace recommendation.
- Oversized furnaces after heat pump changeovers. When a contractor installs a new heat pump but leaves the old gas furnace as backup, the furnace is often too large for the home’s actual load. That leads to frequent cycling, uneven temperatures, and higher gas bills.
Pricing for Furnace Repair in Mountain View, CA
A diagnostic visit in Mountain View costs $89, and that fee is credited toward the repair if you approve the work. Common repairs like ignitor replacement or flame sensor cleaning run $150 – $350. A blower motor replacement lands between $350 – $700. Heat pump repairs fall in the $150 – $650 range. You’ll get the exact price in writing before we start, and the written guarantee covers the repair for a full year. If the repair fails in that time, we return at no charge. Here are the line items:
| Service | Price Range |
|---|---|
| Furnace Repair (diagnostic and common part replacement) | $150 – $700 |
| Tune-Up (furnace maintenance) | $80 – $200 |
| Heat Pump Repair | $150 – $650 |
Call (361) 306-9515 for a free estimate over the phone. We’ll ask about your system’s age, the symptom, and your home’s general size, then give you a realistic price range before we ever roll a truck.
We Also Serve Cities Near Mountain View
Dalton Heating & Air serves Mountain View and the surrounding communities. If you’re in Los Altos, Sunnyvale, Stanford, or Cupertino, we can usually reach you the same day you call. Our dispatch is coordinated from the brand’s San Francisco Bay Area office, and crews are staged locally throughout the South Bay. For furnace repair anywhere in the Mountain View area, Mountain View residents get priority scheduling when they call before 10 a.m.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Mountain View
If the furnace is under 15 years old and the repair is $700 or less, repair it. If the heat exchanger is cracked, replacement is the only safe option, and that’s a hard line we don’t cross. For older furnaces in Mountain View’s 1950s and 60s homes, a $500 repair on a unit that’s already past its service life is often money better spent toward a modern system. We walk you through the numbers honestly, and our technicians are not paid on what they sell. Call (361) 306-9515 and we’ll give you a straight answer.
SEER2 is the updated efficiency rating standard for heat pumps and air conditioners, in place since January 2023. It measures cooling efficiency under more realistic test conditions than the older SEER rating. For a Mountain View home with a dual-fuel system, a higher SEER2 heat pump means lower summer cooling bills, but it won’t change how your gas furnace performs in winter. The furnace’s efficiency is rated separately as AFUE. If you’re repairing a 15-year-old furnace, the efficiency difference alone rarely justifies replacement unless the repair is major.
Short-cycling is usually caused by one of three things: an oversized furnace, undersized return ductwork, or a failing high-limit switch. Mountain View’s older bungalows near downtown frequently have return ducts that were adequate for a 60,000 BTU furnace but are too small for a 100,000 BTU unit installed later. That creates high static pressure, which trips the limit switch and shuts the furnace down before the house reaches set temperature. We measure static pressure on every call to confirm the actual cause before replacing parts.
Once a year, and the best time is early fall. Mountain View furnaces sit unused from roughly April through October, which gives dust time to build up on the burner and flame sensor. An $80 – $200 tune-up in September or October catches weak ignitors and failed capacitors before the first cold night. If you’re in a rental property or just bought a home, do it immediately after move-in regardless of the season. We leave a written report of exactly what we found and what we did.
Yes. Our technicians are trained on both gas furnaces and heat pumps, and we service Rheem, Goodman, York, Daikin, and other major brands. Mountain View’s housing stock includes a lot of dual-fuel systems that pair a heat pump with a gas furnace, and we diagnose the whole system, not just the unit that happens to be throwing the error code. Call (361) 306-9515 and tell us what the system is doing. We’ll give you a real answer and a written price before any work starts.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Mountain View since 2003.