Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Kent
Furnace repair in Kent, WA typically costs $150 – $700, with most common fixes like ignitors, flame sensors, and blower motor capacitors landing between $200 and $450. We dispatch locally from the Seattle office and can usually have a technician at your door in Kent the same day you call. A live person answers our phone 24/7 at (361) 306-9515, and every repair comes with a written price before any work starts and a written guarantee for a full year.
Kent’s heating season runs long and hard. If your furnace quit this morning, you don’t need a callback window. You need someone who knows the difference between a limit-switch trip on a 1970s rambler near West Hill and a failed inducer motor on a newer two-story out by Lake Fenwick. That’s the work we do every day. Furnace Repair is our core service, and we treat Kent homeowners the way we’d want our own furnaces handled: diagnosed straight, priced in writing, and fixed right the first trip.
Why Dalton Heating & Air Is Kent’s Preferred Furnace Repair Company
Kent homeowners call us because they’ve been burned before. A tech who didn’t show. A quote that changed at the door. A repair that lasted three weeks. We run this company under The Garrison Standard, and it shows in how we operate: every Kent job gets a written price before work begins, every repair carries a written guarantee, and if the repair fails inside that year, we come back at no charge. That’s not an upgrade. It’s the default.
Our technicians are background-checked, uniformed, and factory-trained to service nine major HVAC brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. When a Kent homeowner books with us, they know exactly who’s coming and what it will cost before the van pulls up. We answer the phone with a live person around the clock, because a furnace that dies at 6:30 a.m. in a January cold snap can’t wait for a call-center voicemail.
Marco Benitez runs our field operations, and his rule for every Kent call is simple: diagnose the actual failure, explain it in plain words, quote the repair in writing, and stand behind the work for a full year. That discipline is why Kent customers keep our number on the fridge.
Emergency Furnace Repair in Kent
Emergency furnace repair in Kent means getting heat back when the outdoor temperature drops and your house won’t warm past 58 degrees. We make emergency calls to Kent homes every cold season, and the most common emergency no-heat repairs run $150 – $700 depending on the part. A failed ignitor is on the low end. A cracked heat exchanger that requires a replacement or a full unit changeout lands at the top. Either way, you get the price in writing before we open the toolbox.
No-Heat Calls and Same-Day Service
Most no-heat calls in Kent are straightforward: a flame sensor fouled by summer dust, a capacitor that finally gave out, or a limit switch that’s been tripping since the first shoulder-season cold snap. Our techs arrive with common parts stocked for the brands Kent homes actually have, which means a single-trip fix more often than not.
Overnight and Weekend Repairs
Furnaces don’t fail on a schedule. A cold Sunday morning in East Hill can leave a house at 50 degrees with a toddler and no backup heat, so we run emergency response every day of the year. The number is the same at 2 p.m. and 2 a.m.: (361) 306-9515. A person answers.
Furnace Maintenance in Kent
Furnace maintenance in Kent is the best money you’ll spend on your heating system, and a tune-up and safety inspection runs $80 – $200. Kent’s dry summer pulls dust and pollen through return ducts, and that fine grit settles on burners, flame sensors, and blower wheels all season. The first cold October morning is when all that neglect turns into a no-heat call. A fall tune-up catches weak capacitors, dirty sensors, and cracked components before they strand you.
What a Kent Tune-Up Covers
Our furnace tune-up includes a full combustion safety check, flame sensor cleaning, capacitor testing, blower inspection, and a written report of what we found. We don’t pay technicians on what they sell, so the report tells you what actually needs attention and what can wait. When a heat exchanger shows fatigue cracks near the crimp, you hear it from us straight, with the exact cost to repair or replace quoted in writing.
Shoulder-Season Cycling Checks
Kent’s fall temperature swings off the Cascade foothills put real stress on furnaces. Overnight lows in the 30s with daytime highs in the 60s mean short run cycles, and oversized furnaces short-cycle even more aggressively. During a maintenance visit, we check your unit’s actual runtime and temperature rise, and flag any oversized furnace that’s headed toward limit-switch failure before the January deep cold.
Trusted Brands We Service in Kent
Kent homes run the full spread of furnace brands, and we’re factory-trained on all nine major residential lines. We see plenty of Goodman units in 1990s ramblers, Lennox in newer construction out by Lake Meridian, Rheem in 1980s split-levels across the valley, and Trane in the bigger two-stories along the West Hill ridge. Our techs carry common parts for these brands on the truck, which speeds up repair times for Kent customers who can’t wait a week for a backordered board. When a part isn’t stocked locally, our Seattle dispatch network gets it to your door faster than most Kent-area competitors can schedule the callback.
Common Furnace Repair Problems We See in Kent Homes
- Limit-switch trips from oversized furnaces short-cycling. Kent’s mild fall weather means many older furnaces never run long enough to reach steady operation. An oversized 100,000-BTU unit in a 1970s rambler on the East Hill can overheat the heat exchanger and shut down mid-cycle, leaving a cold house and a confused thermostat.
- Blower motor capacitor failure in older housing stock. The same weak-capacitor pattern that kills summer AC compressors in Kent also hits winter blowers. A blower running hot on a failing capacitor eventually stops turning, and you get a furnace that fires but won’t move air.
- Ignition and flame-sensor fouling from dry summer dust. Kent’s dry summers pull dust and pollen into return ducts, and that fine grit coats flame sensors and ignitors. The first cold morning of October is when we get the call: furnace tries to fire, clicks three times, then locks out.
- Heat exchanger fatigue at the crimp. Kent’s shoulder-season temperature swings mean more heating cycles, and each cycle puts thermal stress on the heat exchanger metal. Hairline cracks near the crimp folds are a common finding on 15-to-20-year-old furnaces across Panther Lake and the surrounding neighborhoods.
Pricing for Furnace Repair in Kent, WA
Here’s what furnace work actually costs in Kent, with no vague language about pricing varying from job to job.
| Service | Typical Kent Price Range |
|---|---|
| Furnace diagnostic and repair (capacitor, ignitor, flame sensor, blower motor) | $150 – $700 |
| Furnace tune-up and safety inspection | $80 – $200 |
| Emergency no-heat furnace repair | $150 – $700 |
A failed ignitor is the cheap end. A blower motor replacement or gas valve runs higher. What determines your final number is the part that failed and the labor to access it. You’ll always know the exact total before we start, and estimates are free. Call (361) 306-9515 for a written quote.
One thing worth saying clearly: we don’t repair a furnace that’s past its useful life just to collect a service fee. If a repair costs more than 40% of a replacement and the unit is over 15 years old, we’ll tell you that straight and show you the numbers.
We Also Serve Cities Near Kent
Dalton Heating & Air covers Furnace Repair in Kent and the surrounding communities, including Renton, Auburn, Federal Way, and Maple Valley. If you’re just over the city line and your furnace quit, call us. Dispatch is coordinated from our Seattle office and our crews serve the whole Kent valley.
Serving Kent, WA - Our Local Coverage Area
We’re based in the Kent area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Kent
A 15-year-old furnace in Kent is worth repairing if the repair is under $400 and the unit has no heat exchanger damage. Once you’re looking at a blower motor, gas valve, or any heat exchanger work on a unit that old, replacement usually makes more financial sense. Kent’s shoulder-season cycling shortens the lifespan of aging furnaces, so a 15-year-old unit here has often seen more thermal cycles than the same furnace in a steadier climate. We’ll run the numbers with you before any work starts, and the repair-versus-replace math is always in writing. Call (361) 306-9515 to talk it through.
Most furnace repairs in Kent run $150 – $700, with common fixes like ignitors, flame sensors, capacitors, and blower motors falling between $200 and $450. The exact price depends on the part and the labor to access it, but you’ll have a written quote before any work begins. A furnace tune-up and safety inspection runs $80 – $200. Estimates are free, so call (361) 306-9515 for an exact number on your specific issue.
Kent’s fall weather pattern creates short-cycling because overnight lows drop into the 30s while daytime highs still reach the 60s, so your furnace fires briefly to satisfy the thermostat, then shuts down before reaching steady operation. If the furnace is oversized for your home, the short-cycling is worse and can trip the limit switch. A load calculation on your actual ductwork and square footage shows whether the unit is sized correctly, and on a 1,800-square-foot Kent rambler, a 100,000-BTU furnace is often oversized. Call (361) 306-9515 for a professional assessment.
SEER2 is the updated efficiency rating for HVAC equipment, and for Kent homeowners it matters because a higher SEER2 furnace works more efficiently through Kent’s long heating season. Kent’s shoulder-season pattern means your furnace runs in short bursts for weeks, and an efficient unit wastes less of each burst. A 96% two-stage furnace will run longer at lower heat, which actually improves comfort and reduces the temperature swings between floors in a two-story Kent home. We can show you the real bill impact of a new SEER2-rated system versus your current unit. Call (361) 306-9515 for that breakdown.
Yes, we service Carrier, Trane, and Lennox furnaces in Kent, along with Goodman, Rheem, York, Daikin, Bryant, and American Standard. Our technicians are factory-trained across all nine brands, and we stock common parts for the units Kent homes actually have. Whether it’s a 1990s Carrier in Panther Lake or a newer Lennox out by Lake Meridian, we have the training and parts to fix it correctly. Call (361) 306-9515 to book a diagnostic.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Kent since 2003.