Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Kemah
Furnace repair in Kemah typically runs $150 – $700, and most no-heat calls we handle are diagnosed and fixed in a single visit. The coastal air here changes what goes wrong with furnaces, and it changes what a repair should cost. If your heat is out on a cold night off SH 146 or in the neighborhoods around the Kemah Boardwalk, call Dalton Heating & Air at (361) 306-9515. A live person answers, and we give you a written price before any work starts.
Our Furnace Repair team knows Kemah’s specific failure patterns. We’re not a generic HVAC shop that treats your furnace like it sits in Katy or The Woodlands. The salt air, the humidity, the oversized systems in 1990s builds along FM 518, and the voltage swings during storm season all shape what we check first when a furnace stops heating. That local knowledge is exactly why Kemah homeowners call us instead of rolling the dice on a random tech.
Why Dalton Heating & Air Is Kemah’s Preferred Furnace Repair Company
We show up on time, put every price in writing before we touch your equipment, and back every repair with a written guarantee for a full year. That’s not a marketing line. It’s the Garrison Standard, and every Dalton Heating & Air location has operated under it since 2003. When you book a furnace repair with us in Kemah, you know three things before the tech arrives: who is coming (background-checked, uniformed, factory-trained), what the visit will cost to diagnose, and that the repair price gets set in writing before any work begins.
Marco Benitez, who leads our operations, holds every tech to the Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That last part matters most in Kemah because our climate produces failures that come back if a tech cuts corners. We don’t.
If a repair fails inside the guarantee period, we return at no charge. No fine print, no pro-rated refund. We come back and make it right. That’s the 365-Day Done Right Promise, and it applies to every furnace repair we perform in Kemah, from an ignitor replacement to a full blower motor swap.
Gas Furnace Repair in Kemah
Gas furnace repair in Kemah starts with a full diagnostic, not guesswork. Coastal humidity and salt air attack burners, ignitors, gas valves, and heat exchangers faster than anywhere inland. When your furnace won’t light or shuts down mid-cycle, a Kemah tech has to check for surface rust and corrosion before replacing parts. Otherwise you’re paying for a flame sensor when the real problem is a rusted burner assembly. Our gas furnace repairs in Kemah run $150 – $700 depending on the part, and the quote is in writing before we replace anything.
Heat Exchanger Inspection Before Any Repair
A cracked or rusted heat exchanger isn’t repairable, and it’s a carbon monoxide risk. We inspect it on every gas furnace call in Kemah. If it’s rusted through from years of Gulf humidity, we tell you honestly and walk through replacement options instead of billing you for a repair that won’t hold.
Ignitor and Gas Valve Work
Ignitors are a common failure in Kemah because moisture from coastal air causes premature cracking. Gas valve failures show up as intermittent heat or no ignition at all. Both fall in the lower end of the $150 – $700 repair range, and we keep common ignitors and gas valve parts stocked for Kemah customers so we’re not waiting on a warehouse.
Furnace Tune Up in Kemah
A furnace tune up in Kemah costs $80 – $200 and in this climate it’s the cheapest insurance you can buy against a rusted-out heat exchanger. Our tune-up includes a combustion analysis, a heat exchanger inspection, burner cleaning, gas pressure calibration, and a check of the blower motor and capacitor. Coastal air makes the inspection step non-negotiable. We catch surface rust before it becomes a crack, and we catch failing capacitors before they take out your blower motor on a cold night.
Rust Prevention and Combustion Checks
Given the salt air, a Kemah tune-up has to go beyond the standard checklist. We look at flue piping for corrosion, check the inducer motor for salt damage, and measure your temperature rise to confirm the heat exchanger isn’t already compromised. The tune-up report is written, not verbal.
Blower Motor and Static Pressure
Many Kemah homes have furnaces sized for AC load, not heating load. Oversized systems short-cycle, which wears out blower motors and throws off static pressure. During a tune-up we measure static pressure and tell you if your ductwork or system size is quietly killing your furnace’s lifespan.
Trusted Brands We Service in Kemah
We’re factory-trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. The furnaces we see most often in Kemah are Goodman, Rheem, and York, and we stock common parts for those brands locally so repair turnaround stays fast. If your furnace isn’t on that list, call anyway. The odds are high we work on it, and we’ll tell you straight if we don’t.
Common Furnace Repair Problems We See in Kemah Homes
- Heat exchanger corrosion from Gulf salt air. This is the big one. Kemah’s coastal humidity pushes moisture through the flue and onto the heat exchanger, causing surface rust that turns into cracks. What looks like a routine flame-rollout call often becomes a heat exchanger inspection, and sometimes a replacement recommendation.
- Blower motor failure from oversized systems. Kemah homes built with furnaces sized for summer AC load short-cycle constantly, which wears out blower motors and throws off static pressure. We see more blower motor replacements here than in inland Houston suburbs.
- Capacitor and control-board failures during storm season. Voltage fluctuations from Gulf storms take out capacitors and control boards faster than normal wear. We replace more of these in Kemah than in inland metro cities, and we keep them stocked.
- Thermostat calibration drift. Coastal humidity and power flickers cause thermostats to drift off calibration, so your furnace cycles wrong or won’t start at all. A calibration is a cheap fix that often saves a pointless service call.
Pricing for Furnace Repair in Kemah, TX
Furnace repairs in Kemah run $150 – $700, and here’s what actually moves the number. An ignitor replacement is on the low end, around $150 – $250. A gas valve or control board lands mid-range, $300 – $500. A blower motor with labor can hit $550 – $700. A cracked heat exchanger means replacement, not repair, and we’ll show you the actual numbers for both paths before you decide. Every repair includes a written price before work starts and a written guarantee for a full year. Estimates are free. Call (361) 306-9515 and we’ll give you a straight answer on cost before you commit to anything.
| Service | Price Range in Kemah |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
We Also Serve Cities Near Kemah
Besides our Furnace Repair in Kemah work, we cover Bacliff, League City, Seabrook, and Dickinson. If you’re in one of those nearby communities and your furnace quits on a cold night, the same written pricing and full-year guarantee apply. Call (361) 306-9515 and we’ll get a tech to you fast.
Serving Kemah, TX - Our Local Coverage Area
We’re based in the Kemah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Kemah
If the heat exchanger is rusted or cracked, replace it. That’s a safety issue, not a repair. For anything else, repair is usually worth it if the furnace is under 15 years old and the repair cost is under half the price of a new system. A 2005 Carrier with a rusted heat exchanger, for example, should not be repaired. We’ll show you the load calculation and real cost difference for both paths so you decide with numbers, not pressure.
Once a year, and in Kemah the heat exchanger inspection that comes with a good tune-up is the most important part. Coastal humidity and salt air cause rust that a dry-climate tech would never see. Our tune-ups run $80 – $200 and include a written report of what we found. Call (361) 306-9515 to schedule one before the next cold snap.
Furnace repairs in Kemah run $150 – $700. Ignitors and flame sensors stay on the low end, gas valves and control boards land mid-range, and blower motors hit the high end. You’ll get a written price before any work starts, so the number won’t shift at the door. Call (361) 306-9515 for a free estimate on your specific furnace.
Salt air. Kemah sits right on Galveston Bay, and the same humidity that rusts patio furniture also pushes moisture through your furnace flue and onto the heat exchanger. Inland cities like Katy don’t get that salt load, so their furnaces don’t see the same surface rust. Our techs look for this on every call, and we’ll tell you honestly whether the rust is cosmetic or a safety issue.
Yes, and it’s common in Kemah. Voltage fluctuations during storm season kill capacitors, and power flickers cause thermostat calibration drift. A furnace that won’t start or cycles erratically often has one of these two problems. Both are in the lower end of the $150 – $700 repair range, and we stock the parts locally so we can usually fix it same day. Call (361) 306-9515 and we’ll confirm the diagnosis over the phone before we even schedule.
We got a no-heat call from a homeowner on Texas Avenue in Kemah, and when our tech pulled the burner assembly he found the heat exchanger fins scaled with surface rust from years of Gulf humidity pushing through the flue. The furnace was a 2005 Carrier, and the rusted heat exchanger meant we couldn’t in good conscience repair it. We walked the homeowner through the load calculation and the real cost difference, and they chose a replacement that actually matched their home’s tonnage. A tune-up with a proper heat exchanger inspection the year before would have caught the rust before it became a safety issue.
If your furnace is acting up in Kemah, call (361) 306-9515. A live person answers around the clock, and we’ll give you a straight answer on what’s wrong, what it costs, and when we can be there. The price is in writing before any work starts, and the repair is guaranteed for a full year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Kemah since 2003.