Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Inverness
Furnace repair in Inverness, CA typically costs $150 – $700 depending on the part that failed, and most calls are completed the same day. If your heat is out or short-cycling through a cold marine-layer morning, call (361) 306-9515 and a live person answers 24/7. Our technicians carry common furnace parts on the truck and arrive in uniform, background-checked, with the price in writing before any work starts.
Inverness is not a typical furnace market. The cool coastal air means heating systems run year-round, often cycling on in July and August when inland towns are running AC. That changes which parts fail, how often they fail, and what a repair-versus-replace decision should actually be based on. We know the difference, and we build our approach around it.
Why Dalton Heating & Air Is Inverness’s Preferred Furnace Repair Company
Dalton Heating & Air operates under The Garrison Standard, a set of rules in place since 2003 that most HVAC companies wouldn’t sign off on. Every repair gets a written price before work begins. Every repair gets a written guarantee for a full year. If the repair fails during that year, we return at no charge. Marco Benitez leads our team, and he holds every technician to The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Our Furnace Repair team serves Inverness homes on both sides of Tomales Bay, including the hills off Sir Francis Drake Boulevard and the neighborhoods near Point Reyes Station. When you call, you reach a live person at dispatch, not a voicemail queue. We tell you who is coming, when they’ll arrive, and what the service call covers. That’s how we’ve built our reputation in Inverness, one no-heat call at a time.
Gas Furnace Repair in Inverness
Gas Furnace Repair in Inverness means diagnosing a system that has often been cycling year-round in damp coastal air. The first thing we check is the heat exchanger, because corrosion from marine moisture is the most common reason a gas furnace fails here. If the exchanger is intact, we move to the blower motor, capacitor, ignitor, and gas valve. Most gas furnace repairs in Inverness run $150 – $700. A Furnace Repair in Inverness call starts with a written diagnosis, so you know the exact number before you approve anything.
Heat Exchanger Inspection and Repair
A cracked heat exchanger is the one furnace problem you should never ignore. It can leak carbon monoxide into the house. We inspect the exchanger on every gas furnace repair call in Inverness, and if it’s cracked or rusted through, we show you the damage and give you a straight answer: repair or replace, with real numbers for both.
Ignitor and Gas Valve Service
When an Inverness furnace clicks but won’t light, the ignitor is often the culprit. It’s a small ceramic part that glows to light the burner. When it fails, the furnace locks out. We replace ignitors and test gas valves for proper pressure, because a weak valve can cause the same symptom and gets misdiagnosed all the time.
Furnace Tune Up in Inverness
Furnace Tune Up in Inverness is more important than in most California towns because your furnace works twelve months a year instead of four. A tune-up here costs $80 – $200 and takes about an hour. We clean the burners, check the heat exchanger for corrosion, test the capacitor under load, measure static pressure, and calibrate the thermostat. Technicians are not paid on what they sell, so you get a written report of what we found, not a sales pitch.
What the Tune-Up Catches
The tune-up catches problems before they become no-heat calls. In Inverness, we regularly find weak blower motor capacitors and early corrosion on exchangers during routine tune-ups. A capacitor that tests weak costs $150 – $400 to replace. A heat exchanger that fails mid-winter costs far more, and leaves you without heat on the wrong day.
Static Pressure and Blower Health
Homes near the Inverness Ridge often have long duct runs, and undersized or dirty ductwork drives up static pressure. That stresses the blower motor. During every tune-up, we measure static pressure and tell you if the system is fighting itself. Fixing airflow early extends blower life by years in this climate.
Trusted Brands We Service in Inverness
Our technicians are factory-trained on Rheem, York, Daikin, and Bryant furnaces, along with Carrier, Trane, Lennox, Goodman, and American Standard. We keep common replacement parts for these brands stocked on service trucks heading to Inverness, which means fewer return visits. A furnace that’s short-cycling on a foggy morning off Sir Francis Drake Boulevard shouldn’t wait three days for a part. Most of the time, we can fix it on the first trip because the part is already on the truck.
Common Furnace Repair Problems We See in Inverness Homes
- Heat exchanger corrosion from marine dampness. Inverness gets heavy fog and salt air year-round. That moisture gets pulled into the combustion air and attacks the exchanger. We see rusted exchangers on furnaces that are only eight to ten years old here, far sooner than inland.
- Short cycling from weak capacitors. When the blower motor capacitor starts to fail, the furnace starts and stops too often. It’s the most common complaint we hear in neighborhoods near the bay, and it’s usually a one-trip fix with a capacitor replacement.
- Oversized systems from skipped load calculations. Too many Inverness furnaces were sized by rule of thumb, not by a Manual J load calculation. An oversized furnace warms the house too fast, shuts off, and short-cycles. That wears the blower and heat exchanger prematurely.
- Sitting AC with unnoticed charge issues. Inverness summers are mild, so heat pumps and mini splits often sit unused for months. If a system has a slow refrigerant leak, nobody notices until the first cold snap. A five-minute capacitor test and a pressure check during fall maintenance can prevent a compressor failure later.
Pricing for Furnace Repair in Inverness, CA
Here are the price ranges our Inverness customers actually see on written estimates. The exact cost depends on the part and the furnace model, but these numbers hold:
| Service | Typical Cost in Inverness |
|---|---|
| Gas Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
| Capacitor Replacement | $150 – $400 |
| Heat Exchanger Inspection | $150 – $500 |
| Thermostat Calibration | $100 – $250 |
The price we quote is the price you pay, in writing, before work begins. If you want to know the number before we start, call (361) 306-9515 and describe the symptom. We’ll give you a realistic range over the phone, and the written estimate confirms it. Estimates are free. The repair is guaranteed in writing for a full year. If it fails, we return at no charge under the 365-Day Done Right Promise.
We Also Serve Cities Near Inverness
Beyond Inverness, our furnace repair crews serve Petaluma, Novato, Cotati, and Fairfax. Each of those areas has its own heating patterns, but the standard we apply is the same: written pricing, on-time arrival, and a full-year written guarantee on every repair. If you’re just outside Inverness, call and ask. Dispatch will tell you straight whether we cover your street.
Serving Inverness, CA - Our Local Coverage Area
We’re based in the Inverness area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Inverness
Short-cycling in Inverness is usually worth repairing because the cause is often a weak capacitor or airflow issue, not a dead furnace. A capacitor replacement runs $150 – $400 and often solves the problem same-day. However, if short-cycling has been going on for years, the heat exchanger may have taken damage from repeated thermal stress, which changes the math. Call (361) 306-9515 and we’ll diagnose it in writing before any repair is approved.
Furnace repair in Inverness typically costs $150 – $700, depending on the part. Common repairs like capacitor replacement run $150 – $400. A heat exchanger inspection is $150 – $500. Every quote is in writing before work begins, and the repair is guaranteed for a full year. Call (361) 306-9515 for a free estimate.
A furnace tune-up in Inverness costs $80 – $200 and includes burner cleaning, heat exchanger inspection, capacitor testing under load, static pressure measurement, and thermostat calibration. In this climate, once a year is the right frequency because the furnace runs through summer marine-layer mornings, not just winter. Call (361) 306-9515 to schedule.
Yes. We base the decision on heat-exchanger integrity and a Manual J load calculation for your actual house, not a rule-of-thumb tonnage estimate. If the exchanger is sound and the system is correctly sized, repair usually makes sense. If the exchanger is corroded or the system is oversized, replacement starts making more financial sense. We give you both numbers in writing and let you decide. Call (361) 306-9515 for an honest assessment.
We service Rheem, York, Daikin, and Bryant furnaces, along with Carrier, Trane, Lennox, Goodman, and American Standard. Our technicians are factory-trained on all nine brands, and trucks heading to Inverness carry common parts so most repairs are same-day. Call (361) 306-9515 and tell us your furnace brand.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Inverness and surrounding communities.