Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Hendersonville
Furnace repair in Hendersonville typically runs $150 – $700 depending on the part that failed, and most calls we run across Sumner County are diagnosed within the first hour. If your furnace is blowing cold air off Indian Lake Road or short-cycling in a 1990s subdivision near Drakes Creek, call (361) 306-9515 and a real person answers, day or night. We dispatch crews to Hendersonville every day, not on a rotating schedule that leaves you waiting through a cold snap.
Hendersonville’s winter design temperatures hover in the teens while summer humidity stays punishing. That combination beats up furnaces and heat pumps differently than the drier cold you see further west. Our techs know the difference, and they arrive with the parts to handle the most common Hendersonville failures on the first trip.
Every repair gets a written price before any work starts, and the work itself is guaranteed in writing for a full year under the 365-Day Done Right Promise. If the repair fails inside that window, we come back at no charge.
Why Dalton Heating & Air Is Hendersonville’s Preferred Furnace Repair Company
Homeowners in Hendersonville call us because they’ve been burned before. A tech who didn’t show. A price that changed at the door. A repair that held for six weeks and then failed again. We run every call on The Garrison Code: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Our techs work the Indian Lake peninsula, the neighborhoods off Sanders Ferry Road, and the newer subdivisions east of New Shackle Island Road every week. That local repetition means we already know what a Bryant furnace in a 1998 Hendersonville build tends to do when temperatures drop, and we carry the capacitors, igniters, and blower motors to address it without a second trip.
Dalton Heating & Air is a Garrison Partners company. That means every Hendersonville call is held to The Garrison Standard, same as every other city in the network. Background-checked, uniformed technicians. Written price before the work. A live person on the phone around the clock. Marco Benitez leads the team, and the expectation from him is simple: do it right the first time, and if it’s not right, come back and make it right.
We service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters in Hendersonville because the housing stock runs the full range, from 1980s split-levels with original Trane units to new construction with variable-speed Goodman systems.
Heat Pump Repair in Hendersonville
Heat pump repair in Hendersonville addresses systems that can’t hold temperature when the mercury drops to the low 20s and the auxiliary strip heat never kicks in the way it should. That’s a common failure mode in Indian Lake-area homes where the strip heat was undersized or wired incorrectly at installation. Repair work here ranges $150 – $700, and the first thing our tech checks is whether the thermostat is actually calling for auxiliary heat before condemning a compressor that’s doing its job.
Cold-Weather Capacity Checks
A heat pump loses heating capacity as outdoor temperatures fall. That’s physics. But a properly sized system in Hendersonville should still hold setpoint into the teens. When it doesn’t, we check the reversing valve, the defrost board, and the strip heat wiring before we talk about replacement.
Defrost Cycle Repairs
Hendersonville’s humid winters mean heat pump coils ice up faster here than in drier climates. If the defrost cycle isn’t clearing the coil, you’ll see poor heating and a system that runs constantly. That’s usually a defrost sensor or control board, not a new heat pump.
Heating Repair in Hendersonville
Heating repair in Hendersonville covers the furnace side of the equation: gas valves, igniters, flame sensors, heat exchangers, and the blower motors that push warm air through the ductwork. These repairs run $150 – $700 in this market, and the specific fix depends on what’s actually failed, not what a sales tech wants to sell you. We diagnose first, quote in writing, and repair what’s broken.
Igniter and Flame Sensor Work
A furnace that clicks but won’t light is usually a bad igniter or a dirty flame sensor. On Hendersonville systems that run hard from late October through March, flame sensors carbon up faster than in milder climates. That’s a quick repair at the low end of the range.
Blower Motor Failures
After a humid Hendersonville summer, the same weak capacitor that strained your AC blower can fail outright when heating season starts. We see this on Goodman, Rheem, and Bryant furnaces throughout the area. Replacing the capacitor or blower motor restores airflow and stops the high-limit trips that shut the furnace down.
Trusted Brands We Service in Hendersonville
Our techs are factory-trained and equipped to service nine major residential brands, and we keep repair parts for the systems we see most in Hendersonville on the truck. Goodman furnaces in Indian Lake builds, Rheem units in Gallatin Road corridor homes, Daikin systems in newer construction east of Whites Creek. That local parts familiarity means fewer return trips and faster heat restoration. This page covers what we do in more detail on our Furnace Repair team’s core service page, but the short version is this: if it heats your home, we can repair it.
Common Furnace Repair Problems We See in Hendersonville Homes
- Short-cycling gas furnaces in 1990s subdivisions: Homes built near Drakes Creek and Saundersville Road often have undersized return air and high static pressure, which trips the high-limit switch long before the heat exchanger fails. The furnace looks broken, but the real problem is airflow.
- Heat pumps that lose capacity in the mid-20s: Indian Lake-area systems frequently have auxiliary strip heat that was never wired for the actual load. The compressor works, the strip heat doesn’t, and the house gets cold.
- Blower motor and capacitor failures after humid summers: The same weak capacitor that killed summer AC on Bryant, Goodman, and Rheem systems becomes a winter airflow problem. It’s a simple fix at the low end of the repair range.
- Cracked heat exchangers on aging Carrier and Trane units: Hendersonville’s temperature swings stress metal over time. We inspect every exchanger on repair calls because a crack is a carbon monoxide risk, not just a comfort issue.
Pricing for Furnace Repair in Hendersonville, TN
Most furnace repair in Hendersonville runs $150 – $700. A bad igniter or flame sensor sits near the low end. A blower motor or gas valve lands in the middle. A heat exchanger is the big one, and that’s when the repair-versus-replace conversation gets honest. Here’s the line-item breakdown:
| Service | Hendersonville Price Range |
|---|---|
| Furnace repair (diagnostic + common part) | $150 – $700 |
| Heat pump repair | $150 – $700 |
| Heating repair (igniter, capacitor, blower motor) | $150 – $700 |
| Tune-up (includes thermostat calibration and refrigerant charge check) | $80 – $200 |
You’ll never get a phone quote that changes at the door. The price is written before any work starts, and the repair is guaranteed in writing for a full year. Call (361) 306-9515 for an exact quote. Estimates are free.
We Also Serve Cities Near Hendersonville
Our Furnace Repair in Hendersonville coverage includes homes across the city, and we run calls in Goodlettsville, Mount Juliet, Gallatin, and White House as well. Same written pricing, same full-year guarantee, same live person on the phone at (361) 306-9515.
Serving Hendersonville, TN - Our Local Coverage Area
We’re based in the Hendersonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Hendersonville
It could be either, and the difference is usually the igniter or flame sensor versus the gas valve or blower motor. A failed igniter runs near $150 – $250. A failed gas valve or blower motor runs $300 – $700. The only way to know is a diagnostic call, and the diagnostic is included in the repair price when you approve the work. Call (361) 306-9515 and we’ll tell you what’s wrong and what it costs to fix, in writing, before any work starts.
For a straightforward repair, no. For a repair that involves airflow or capacity problems, a load calculation tells us whether the furnace is even sized right for the house. Hendersonville’s 1990s subdivisions often have return-air systems that were undersized from the start, and no new igniter will fix an airflow problem. We’ll run the numbers when it matters and tell you what they mean.
SEER2 is just a more honest efficiency test than the old SEER rating. It accounts for real-world duct and static pressure losses, which Hendersonville homes with undersized returns regularly experience. A unit rated 16 SEER might test at 14.5 SEER2. The number itself doesn’t change your bill, but it gives you a truer picture of what a replacement will actually cost to run. For repair decisions, it only matters if you’re close to the replace line.
A heat pump loses capacity as outdoor temperatures drop, but a properly sized unit should still hold setpoint through the low 20s. If yours can’t, the most likely culprits are a failed reversing valve, a defrost board that isn’t clearing the coil, or auxiliary strip heat that was never wired correctly. That’s a repairable condition, not automatic replacement. We’ll diagnose it honestly and quote the fix in writing.
Yes. We service all nine major residential brands including Carrier, Trane, Goodman, Rheem, and the rest, and we carry common parts for the systems we see most in Hendersonville on the truck. That means fewer return trips and faster heat restoration. Call (361) 306-9515 and we’ll confirm the brand and model before the tech rolls.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Hendersonville since 2003.