Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Fort Worth, TX
Dalton Heating & Air is the HVAC company Fort Worth homeowners call when they want a straight answer and a written price before any work starts. Fort Worth’s combination of clay-heavy soil, hundred-degree summer stretches, and a housing stock that spans 1920s bungalows to new-build suburbs means no two systems fail the same way. We’re a Garrison Partners company held to The Garrison Standard on every job, and you can reach a live person at (361) 306-9515 any hour of the day. Our three core services each have their own Fort Worth page linked below, so you can go straight to what you need.
Why Fort Worth Homes Are Different
Fort Worth sits on expansive clay soil that shifts with every wet-dry cycle, and that movement shows up in slab foundations, duct runs, and condenser pads. A unit that was level in March can be sitting a half-inch out of plumb by September, which strains refrigerant lines and shortens compressor life. Homes in Arlington Heights, Ridglea, and the TCU area were largely built between the 1930s and 1960s, meaning tight closets, retrofit return-air paths, and original ductwork that was sized for a different era. Meanwhile, Alliance, Saginaw, and the far north side are mostly post-2000 construction with different headaches: builder-grade systems nearing end of life all at once. Summer attic temperatures in Fort Worth routinely exceed 140°F, so any tech working a furnace or air handler in that space is dealing with conditions that change how fast capacitors, blower motors, and control boards age. The city also has a patchwork of permitting and inspection expectations depending on whether the job is a simple component swap or a full system changeout, which is why we quote the whole job upfront, paperwork included.
Our Main Fort Worth Services
AC repair and furnace repair account for the majority of the calls we run in Fort Worth, and heat pump installation keeps growing as homeowners look for a single system that handles both seasons. Each service has its own page with local pricing detail, typical failure patterns, and what to expect on the day of the appointment.
AC Repair in Fort Worth
When a Fort Worth AC goes down in July, the house can hit 90°F indoors by late afternoon, and the repair usually comes down to a failed capacitor, a refrigerant leak, a dead condenser fan motor, or a clogged evaporator coil. On the clay soil that defines so much of the city, we also see pad settlement pulling lines tight, which creates slow leaks that don’t show up until the first triple-digit week. Most repairs run $150 to $650 depending on the part and system age. Every AC repair we do is guaranteed in writing for a full year, and if the fix doesn’t hold, the return visit is free. AC Repair in Fort Worth covers pricing in more detail.
Heat Pump Installation in Fort Worth
Fort Worth winters rarely drop below freezing for long, which makes a heat pump a practical, efficient option for homes that want one system doing the work of two. Installation quality hinges on correct sizing, which means a load calculation, not a guess, and that’s why we don’t quote heat pumps sight unseen. Fort Worth homes with existing electric furnaces or aging AC-only equipment are the usual candidates, and the work often includes upgrading the electrical service, adding a drain line, and relocating the outdoor unit off the clay. Heat Pump Installation in Fort Worth walks through equipment, timeline, and what the written price includes.
Furnace Repair in Fort Worth
Fort Worth furnaces don’t run hard for most of the year, but when a cold front drops temperatures into the teens, a dead ignitor or failed limit switch becomes an immediate problem. The most common furnace repairs in the area are flame sensor cleaning, inducer motor replacement, gas valve failure, and control board issues, most falling between $150 and $450. Older homes in the central Fort Worth neighborhoods often have furnaces that were oversized when installed, which short-cycles the equipment and wears parts faster. Every furnace repair we perform carries the same written one-year guarantee as our AC work. Full details are on the Furnace Repair in Fort Worth page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
We’re factory-trained on all nine major residential brands, and in Fort Worth we see a lot of Rheem in newer construction, York in older track homes, and Daikin in recent heat pump installs. We keep common parts for all of these stocked on the truck, which means most repairs finish the same day without a parts run. See our brands for the full training list.
Pricing for HVAC Company in Fort Worth, TX
Every price below is the range you should expect to pay in Fort Worth. The number depends on the part, the system age, and how accessible the equipment is. What never changes: the price is in writing before we start, and it doesn’t change when the job is done.
| Service | Typical range in Fort Worth |
|---|---|
| AC repair (capacitor, contactor, fan motor) | $150 – $650 |
| Furnace repair (ignitor, flame sensor, gas valve) | $150 – $700 |
| Full AC system installation | $3,500 – $7,500 |
| Seasonal tune-up | $80 – $200 |
| Heat pump repair (common component) | $150 – $650 |
| Heat pump installation | $3,500 – $7,500 |
| Furnace replacement (basic swap) | $3,500 – $7,500 |
What pushes a Fort Worth job toward the top of those ranges is usually access: a furnace crammed into a 1960s closet in Wedgwood takes longer than a wide-open attic in Keller. Refrigerant type matters too. Older R-22 systems cost more to recharge than newer R-410A units, and sometimes the better answer is a replacement rather than a recharge. Either way, the price is written down before we touch a tool.
Neighborhoods We Serve in Fort Worth
Our crews run calls across the whole city, from the historic central neighborhoods to the newer subdivisions on the north and far west sides. Most appointments can be scheduled within a day, and emergency calls are dispatched as they come in.
- Arlington Heights
- Ridglea
- Wedgewood
- North Richland Hills area
- Alliance
Service Area – Cities Near Fort Worth
Dalton Heating & Air serves Fort Worth and the surrounding Tarrant County communities. If you’re in Haltom City, TX, North Richland Hills, TX, Hurst, TX, or Kennedale, TX, we cover those areas with the same written pricing and one-year guarantee. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and crews live and work in these communities.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Fort Worth
Same-day response is standard for emergencies during Fort Worth’s summer and winter peak seasons. A live person answers the phone 24/7, and our local crews are dispatched on a rolling basis throughout the day. For non-emergency appointments, we typically schedule within 24 to 48 hours. Call (361) 306-9515, and the person who answers can give you a real arrival window.
Most component repairs, like a capacitor or flame sensor replacement, require no permit. A full system changeout, whether it’s an AC, furnace, or heat pump, does require a permit in Fort Worth, and we pull it as part of the job. The permit cost is included in the written quote, not added as a line item surprise.
Yes. Fort Worth’s housing stock includes a lot of pre-1970 construction, and the work in those homes involves retrofit duct paths, undersized closets, and equipment that’s been patched for years. Our technicians carry parts for older systems where they’re still available, and when a repair doesn’t make sense on a 25-year-old unit, we’ll tell you that plainly and give you a written replacement price instead. Call (361) 306-9515 for an exact quote on your system.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Changed the filter size and added a better filter rack. Simple and useful advice."
- Rhonda C."Honest, direct people. Told me what the furnace needed and nothing more, and the bill matched."
- Eliza S."Coil cleaning and a refrigerant check before summer. AC has never been this cold."
- Marty D.