Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Dripping Springs, TX
Dripping Springs brings a specific set of challenges to HVAC work: limestone shelf that slows condenser pad pours, hard well water that eats coils faster than city water, and summer attic temperatures that cook ductwork. Dalton Heating & Air runs HVAC service across Dripping Springs with written pricing on every job and a one-year written guarantee on every repair. If you need AC work, heat pump equipment, or furnace service, call (361) 306-9515 and a real person answers.
Why Dripping Springs Homes Are Different
Homes in Dripping Springs sit on the Edwards Plateau, which means limestone ledge is often just a few inches below the topsoil. Condenser slabs need to be built up or anchored differently than in Austin’s clay, and drainage around outdoor units has to account for the slope so a hard rain doesn’t leave the unit standing in a puddle. Those slopes are steeper out along Ranch Road 12 and in neighborhoods cut into the hills west of town, so we’re used to setting outdoor units on uneven grade.
The housing stock runs a wide band: 1980s and 1990s production builds in the older sections of town, custom homes on acreage, and newer developments pushing out toward Sawyer Ranch Road and beyond. That mix means we see everything from original R-22 systems still limping along to brand-new inverter heat pumps. Hard water from the Trinity Aquifer shortens evaporator coil life in Dripping Springs more than any other single factor we see. We also work around HOA rules in communities like Belterra and Caliterra, where equipment placement and line-set routing have to be approved before we run anything.
Our Main Dripping Springs Services
The three jobs Dripping Springs homeowners call us for most are AC repair, heat pump installation, and furnace repair. Each has its own page with specific pricing, what the visit covers, and what to expect.
AC Repair in Dripping Springs
Most AC failures in Dripping Springs show up in July and August, when systems have been running hard for weeks. We diagnose faulty capacitors, refrigerant leaks, failed contactors, and dead blower motors, then put the repair price in writing before we touch anything. The hard water here means coil leaks are more common than in most of the Hill Country. Get the full breakdown on AC Repair in Dripping Springs.
Heat Pump Installation in Dripping Springs
Heat pumps are a strong fit for Dripping Springs winters, which are mild enough that a properly sized heat pump handles the heating load without backup strips most days. We handle full replacements and new construction installs, including the ductwork assessments so a unit isn’t installed against undersized or leaking ducts. Correct sizing matters here because of the temperature swing between summer afternoons and winter nights. See what installation involves on our Heat Pump Installation in Dripping Springs page.
Furnace Repair in Dripping Springs
Furnaces in Dripping Springs don’t run as many hours as systems up north, but they get ignored for months and then asked to fire on the first cold snap. We see failed ignitors, dirty flame sensors, cracked heat exchangers, and dead draft inducer motors. The limestone dust that settles through crawl spaces and attics here doesn’t help furnace burners stay clean. Details and typical repair costs are on the Furnace Repair in Dripping Springs page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dripping Springs
Our technicians are factory-trained on Rheem, York, Daikin, and Bryant equipment, among the major residential brands. We keep common parts for these systems stocked locally so a repair doesn’t stall waiting on a shipment. See what we work on at our brands.
Pricing for HVAC Company in Dripping Springs, TX
These are the market ranges we see across Dripping Springs. Your exact price is always put in writing before any work starts.
| Service | Typical range in Dripping Springs |
|---|---|
| AC repair, minor (capacitor, contactor) | $150 – $350 |
| AC repair, major (blower motor, control board) | $350 – $650 |
| Furnace repair, minor (flame sensor, ignitor) | $150 – $350 |
| Furnace repair, major (inducer motor, gas valve) | $350 – $700 |
| AC installation, full system | $3,500 – $7,500 |
| Tune-up, single system | $80 – $200 |
What pushes a Dripping Springs job toward the top of those ranges is usually access: attic units in tight second-story spaces, condensers on steep hillsides, or equipment that hasn’t been maintained in years. Regardless of the final number, it’s in writing before we begin, and the repair carries a full one-year written guarantee.
Neighborhoods We Serve in Dripping Springs
We run calls across the whole Dripping Springs area daily. Most neighborhoods are within a 20 to 30 minute response window from dispatch, though heavy weekend traffic on Highway 290 can stretch that during festivals and market days.
- Belterra
- Caliterra
- Reunion Ranch
- Headwaters
- Mercer Ranch
Service Area – Cities Near Dripping Springs
Dalton Heating & Air also runs calls in the communities around Dripping Springs. We cover Wimberley, TX to the south, Manchaca, TX and Buda, TX to the east, and into Austin, TX along the 290 corridor when the schedule allows.
Serving Dripping Springs, TX - Our Local Coverage Area
We’re based in the Dripping Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Dripping Springs
Most Dripping Springs calls get a technician on site within a few hours, and emergency calls are prioritized during the first cold snap or a stretch of 100-degree days. Call (361) 306-9515 and the dispatcher will tell you the actual window, not a vague promise.
Some communities, including Belterra and Caliterra, require architectural review before outdoor equipment is replaced or relocated. If you’re in an HOA, check with your management office first. We can usually work with whatever placement approval they require.
Yes. We repair everything from small part failures to full system replacements, and we install new heat pump and AC equipment. Marcus Benitez oversees every Dripping Springs job. The scope and price go in writing before any work starts, and repairs carry a one-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dripping Springs Customers Say
"Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Tech arrived in uniform right on time. AC wasn't cooling, found a failed capacitor, and replaced it in twenty minutes. The owner is a veteran and the company runs like it."
- Frank O."Blower motor died on the coldest night. They had the part on the truck and had us warm again the same day."
- Sandy G.