Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Brisbane, CA
Brisbane sits in a climate pocket that surprises people. Mornings roll in with fog off San Bruno Mountain, afternoons can spike into the 80s in summer, and winter nights dip cold enough to make a failed furnace a real problem by morning. Most homes here were built between the 1940s and 1980s, which means undersized ductwork, aging panels, and equipment that’s been patched more times than it’s been replaced. Dalton Heating & Air handles heating and cooling work in Brisbane with written pricing, on-time arrival, and a full-year guarantee on every repair. Call (361) 306-9515 when something’s off.
Why Brisbane Homes Are Different
Brisbane’s housing stock runs older and smaller than what you’ll find down the Peninsula, and that shapes how we approach every job. Many homes in the valley floor near Visitacion Avenue and along San Bruno Avenue were built before central air was standard, so we’re often retrofitting systems into crawlspaces and closets that were never designed for them. The hillside streets above the downtown, around Kings Road and the steeper sections near the mountain, mean roof access and condenser pads sit on grades that require careful leveling and drainage work.
Salt air from the Bay is a constant factor here. Condenser coils corrode faster in Brisbane than in inland cities like San Bruno or Millbrae, which means regular cleaning and coil protection matter more. We also see a fair number of homes where the original gravity furnace is still present, or where a wall furnace is the only heat source. Those older setups often need electrical and duct modifications to bring a modern system up to code. Brisbane requires permits for most HVAC changeouts, and we handle that paperwork as part of the install process.
Our Main Brisbane Services
Three services account for nearly every call we take in Brisbane. Each has its own page with pricing, timing, and what to expect.
AC Repair in Brisbane
When a Brisbane AC quits in August, it’s rarely the compressor. More often it’s a capacitor, a contactor, or a refrigerant leak made worse by years of salt air on the coil. AC Repair in Brisbane covers the common failure points, our diagnostic process, and what a same-day repair typically costs. Every repair gets a written price before we start and a written guarantee for a full year. If the fix doesn’t hold, we return at no charge. That’s the Garrison Standard, and it applies on every call we run in Brisbane.
Heat Pump Installation in Brisbane
Heat pumps make particular sense in Brisbane’s mild climate. They heat and cool with one system, and modern inverter units handle the city’s temperature swings efficiently. Heat Pump Installation in Brisbane walks through sizing, brands, rebates, and what installation in an older Brisbane home involves. Some hillside lots here need a stand-mounted or wall-mounted condenser, and we factor drainage and seismic strapping into every quote. Every install includes written pricing before work begins and a set install date.
Furnace Repair in Brisbane
Brisbane winters are damp and chilly, and a furnace that fails on a cold night is urgent. Most furnace repairs we run here involve igniters, flame sensors, gas valves, or blower motors in units that are 15 to 25 years old. Furnace Repair in Brisbane details our repair process, the price range for common failures, and how we handle no-heat calls after hours. The repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Brisbane
We service Goodman, Rheem, York, and Daikin systems, along with most other major residential brands. Our technicians carry common parts for these units, which means faster turnaround on repairs in Brisbane. See our brands for the full list and what we stock.
Pricing for HVAC Company in Brisbane, CA
| Service | Typical range in Brisbane |
|---|---|
| AC repair (minor – capacitor, contactor) | $150 – $300 |
| AC repair (major – blower motor, coil leak) | $400 – $650 |
| Furnace repair (igniter, flame sensor) | $150 – $350 |
| Furnace repair (gas valve, blower motor) | $400 – $700 |
| AC installation | $3,500 – $7,500 |
| Tune-up | $80 – $200 |
What pushes a Brisbane job toward the top of a range is access. Crawlspace work on a hillside home, a condenser pad that needs leveling on a slope, or duct modifications in a 1950s ranch add labor hours. Salt air corrosion can also mean a coil that’s beyond saving and needs replacement rather than repair. On every job, the price is in writing before any work starts. No exceptions, no door markup.
Neighborhoods We Serve in Brisbane
We run calls across all of Brisbane. Typical response is same-day for repair calls within the city.
- Crocker Park
- Brisbane Village
- Central Brisbane near San Bruno Avenue
- Hillside streets above Kings Road
- Visitacion Avenue corridor
Service Area – Cities Near Brisbane
In addition to Brisbane, our crews serve nearby Peninsula and Bay Area communities. If you’re in South San Francisco, CA, Daly City, CA, San Bruno, CA, or Millbrae, CA, we cover those areas with the same written pricing and guarantee. Call us to confirm coverage and schedule.
Serving Brisbane, CA - Our Local Coverage Area
We’re based in the Brisbane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Brisbane
Most repair calls in Brisbane are scheduled same-day, and we run emergency response after hours as well. Our phone is answered by a live person 24/7, not a voicemail queue. When you call (361) 306-9515, you’ll get a real person who can dispatch a technician to your Brisbane address.
Most furnace and AC changeouts in Brisbane require a city permit, and heat pump installations almost always do. We pull the necessary permits as part of the job. Repairs that swap components like capacitors or igniters generally don’t need one. We’ll confirm on the initial call.
Yes. Many Brisbane homes have crawlspace access, wall furnaces, or no existing ductwork, and those jobs take careful planning rather than a bigger crew. We quote those projects only after looking at the actual space, and the price you get is the price you pay. Call for a free estimate at (361) 306-9515.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brisbane Customers Say
"Blower motor died on the coldest night. They had the part on the truck and had us warm again the same day."
- Sandy G."Changed the filter size and added a better filter rack. Simple and useful advice."
- Rhonda C."Honest, direct people. Told me what the furnace needed and nothing more, and the bill matched."
- Eliza S.