Carrier HVAC Service Nationwide | Dalton Heating & Air

Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as $119/month*on approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane
Goodman
Goodman

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Los Angeles Homeowners Choose Carrier HVAC

Carrier HVAC service in Los Angeles means working on the Infinity, Performance, and Comfort lines we see in homes from Silver Lake to Sherman Oaks every week. We’re an independent Carrier service provider, not a Carrier-authorized dealer, and that independence lets us diagnose these systems honestly and use the parts that actually make sense for your unit and your budget. Call (361) 306-9515 for a free estimate on any Carrier repair or replacement in Los Angeles.

Call (361) 306-9515

Carrier built a reputation for quiet, efficient equipment, and a lot of Los Angeles and Long Beach homes run on Carrier heat pumps and AC condensing units because they hold up well in our long cooling season. But every brand has its failure patterns, and Carrier is no exception. The Infinity control boards, the Performance furnace inducers, the refrigerant flare fittings on the ductless systems. When you know the patterns, you stop swapping parts and start fixing the actual problem. That’s the work we do.

You’ll find Carrier systems in San Diego and almost every Los Angeles neighborhood: older Comfort series units in El Sereno and Boyle Heights, Performance midrange systems in the San Fernando Valley, top-of-the-line Infinity heat pumps in hillside homes in Sherman Oaks and Studio City. We service all of it.

Why Trust Dalton Heating & Air for Your Carrier HVAC?

Our technicians work on Carrier equipment every week, which means they know the Infinity control logic, the Performance furnace quirks, and the Comfort series’ known capacitor issues without having to thumb through a manual. Marco Benitez, our owner, grew up in East Los Angeles near Garfield Park and has been fixing HVAC systems in the LA Basin for over two decades. He learned the trade at Los Angeles Trade-Technical College, where the lab work covered refrigerant systems, duct design, and load calculations. The last part matters: right-sizing equipment to the house, not just replacing what was already there.

We’re not affiliated with or authorized by Carrier. We say that plainly because it shapes the advice we give. An authorized dealer has an interest in steering you toward new Carrier equipment. We have an interest in fixing what’s fixable and telling you when replacement genuinely makes more sense. That’s a different conversation.

Every Carrier repair we do gets a written price before any work starts, a written guarantee for a full year, and a free return visit if the repair fails inside that window. Those are non-negotiable parts of The Garrison Standard, which Dalton Heating & Air has operated under since 2003. Not as a promotion. As a rule.

Common Carrier HVAC Problems We Fix in Los Angeles

  • Infinity control board communication failures. The Infinity 24ANB7 and 24ANB1 lines use a communicating thermostat that talks to the air handler and outdoor unit over a data line. When that communication drops, the system throws a fault code and won’t run. Sometimes it’s actually the board. Sometimes it’s a low-voltage wiring issue or a failed component pulling the data line down. We diagnose the difference before replacing anything.
  • Condenser fan motor and capacitor failures on Performance and Comfort outdoor units. Los Angeles summers run long and hot, and voltage spikes from the grid take a toll on capacitors. The Performance 24ACC6 and Comfort 24ABC6 outdoor units are both prone to capacitor failures after five to seven years, especially in neighborhoods with older electrical service. A failed capacitor often takes the fan motor with it if the unit keeps trying to run.
  • Inducer motor and pressure switch issues on Carrier furnaces. The Performance 59TP6 furnace is a common sight in Los Angeles homes, especially in the Valley where winter nights get cold enough to actually need heat. The inducer motor pulls combustion air through the heat exchanger, and when it weakens or the pressure switch gets sticky, the furnace locks out and flashes a code. It’ll try to start, then quit. We see it often enough to stock the replacement parts.
  • Refrigerant leaks at factory flare fittings on Carrier mini-splits. Ductless and mini-split systems ship with flare connections at the evaporator and condenser. Over time and through thermal cycling, those flares can loosen or crack, letting refrigerant escape. The system still runs, but the coil freezes and the house doesn’t cool. We find and repair these leaks, then recharge the system to the manufacturer’s spec.
  • Ignition lockouts on Carrier furnaces from dirty flame sensors. A dirty flame sensor tells the control board there’s no flame when there is one, so the gas valve shuts off mid-cycle. It’s a fifteen-minute fix with the right cleaning and sometimes a replacement sensor. On older Comfort 58SB0 furnaces, we also see worn hot surface ignitors that crack and fail to light.

Carrier Parts & Our Repair-vs-Replace Approach

We use OEM Carrier parts for critical components: control boards, ignitors, blower motors, and anything that talks to the Infinity system. Those parts have to match the exact engineering specs of the unit, and aftermarket versions often cause more problems than they solve. For wear items like capacitors and contactors, we use high-quality aftermarket options that meet or exceed the OEM spec, because they’re readily available and reliable.

We stock common Carrier repair parts locally: capacitors, contactors, flame sensors, pressure switches, and inducer motors for the 59TP6. That means most repairs happen same-day, not after a week of waiting on a parts order. When a Carrier unit needs a repair over $1,500, we give you a straight answer on whether the repair makes sense on a unit that old. A 14-year-old Comfort series that needs a new compressor? You should know what a replacement costs before you sink money into that repair. Call (361) 306-9515 and we’ll walk you through the numbers for your specific unit.

Our Carrier Service Process – Step by Step

  1. 1
    Diagnosis in writing. We pull the fault codes from your Carrier unit, test the actual components with a multimeter, check refrigerant pressures and temperatures, and write down what’s wrong and what it costs to fix. You approve the repair before we touch a tool.
  2. 2
    Repair or replacement with the right parts. For Carrier systems, we use OEM parts on critical components and quality aftermarket on wear items. The price is already in writing, so there’s no upsell at the door.
  3. 3
    System test under load. We run the system through a full cycle, monitor pressures and temperatures, and confirm the fault code is clear. For a furnace, we verify ignition, flame signal, and inducer pressures. For a heat pump, we test both heating and cooling modes.
  4. 4
    Written guarantee. Every repair comes with a full-year written guarantee. If the same repair fails within that year, we return at no charge. The Garrison Code is simple: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work.

Carrier Products We Service & Install in Los Angeles

We service and install the full range of Carrier residential equipment: the Infinity series, including the 24ANB7 and 24ANB1 air conditioners and 25HNB6 heat pumps; the Performance series, including the 24ACC6, 24ACB7, and 59TP6 furnace; the Comfort series, including the 24ABC6 and 58SB0; and Carrier ductless mini-split systems. We stock common repair parts locally and can order specific Carrier parts quickly when a job calls for something unusual.

We Also Service These Brands

Carrier isn’t the only brand we work on. Our technicians train across nine major residential HVAC brands: Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, American Standard, and Carrier. If you have a Trane or Lennox system that needs attention while we’re out for Carrier service, we can handle both.

FAQs – Carrier HVAC Service in Los Angeles

How much does Carrier HVAC service cost in Los Angeles?

Service Price Range
AC Repair $175 – $765
Furnace Repair $175 – $825
AC Installation $4,130 – $8,850
Tune-Up $95 – $235

These are the ranges we quote for Carrier work across Los Angeles. The exact price depends on what’s wrong and which parts your unit needs. The written price you get before the work starts is the price you pay. Call (361) 306-9515 for an exact quote; estimates are free.

Book Your Carrier Service in Los Angeles, CA

Call (361) 306-9515 and a real person answers, 24/7. We’ll schedule a service window that works for you, send a background-checked uniformed technician inside that window, and put the price in writing before any Carrier repair begins.

Written by Marco Benitez, Owner at Dalton Heating & Air, serving Los Angeles since 2003.

Need HVAC help nationwide? Licensed & insured · within the hour response · free estimates
Call (361) 306-9515
Areas We Serve

Request a Free Estimate

Tell us what you need - Dalton Heating & Air responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and agree to be contacted through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch