Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Lexington
Heat pump installation in Lexington runs $3,500 – $7,500 for most homes, with the spread driven by equipment efficiency, ductwork condition, and whether your house needs a straightforward swap or a full system redesign. Most replacements take one to two days once equipment arrives. If your heat pump died in January or your AC quit during a July heat wave, we’re not going to make you wait a week for a quote. Call (361) 306-9515 and a live person answers, 24/7, not a voicemail tree.
Our install crews work in Lexington neighborhoods every week, from the Colonials off Waltham Street to newer builds near the Minuteman Commuter Bikeway. We know the housing stock, we know the local inspection process, and we know what a properly sized heat pump should do for a Lexington home in both January and August. The price you get is in writing before any work starts. No adjustments at the door.
Why Dalton Heating & Air Is Lexington’s Preferred Heat Pump Installation Company
Dalton Heating & Air operates under The Garrison Standard, a code we’ve been held to since 2003. That means every install crew arrives inside the stated window, puts the price in writing before opening a single panel, does the work by the book, and leaves the site clean. If the work doesn’t hold, we come back. That’s not a slogan. It’s the 365-Day Done Right Promise, and it’s in writing on every job we do in Lexington.
Marco Benitez leads our installation team, and every technician who steps onto a Lexington property is background-checked, uniformed, and factory-trained on nine major HVAC brands including Carrier, Trane, Lennox, and Goodman. You’ll know who is coming before they arrive. We don’t send subs. We don’t rotate through unknown crews. The same standard applies whether we’re replacing a heat pump in a 1925 colonial on Clarke Street or a nearly new build near Lexington Center.
Our dispatch and scheduling is coordinated from the brand’s Boston office, but the crews who knock on your door are local to Lexington and the surrounding towns. We answer the phone with a human being, day or night. If your heat pump fails during a cold snap, you talk to someone who can actually schedule a truck, not a call center that opens Monday.
Heat Pump Maintenance in Lexington
Heat pump maintenance in Lexington should happen twice a year, once in spring before cooling season and once in fall before heating season. The job runs $80 – $200 depending on system age and condition. During a maintenance visit we clean the condenser coil, check refrigerant charge, test capacitors and contactors, inspect electrical connections, measure static pressure, and confirm the defrost cycle works. We hand you a written report of what we found, with photos, not a verbal summary and a hard sell.
Seasonal Tune-Up Scope
A proper heat pump tune-up in Lexington includes a coil cleaning, drain line flush, blower motor amp draw check, and thermostat calibration. We also measure temperature split across the coil to confirm the system moves heat, not just air. If we find a capacitor that’s starting to weaken, we’ll tell you before it fails at 10 p.m. on a zero-degree night.
Why Lexington Homeowners Schedule Twice a Year
Lexington’s freeze-thaw cycles are hard on outdoor condenser coils. Ice builds, debris packs in, and airflow chokes off. A coil that’s 30% blocked forces the compressor to work harder, shortens system life, and shows up as a higher electric bill before it shows up as a breakdown. Twice-yearly maintenance costs less than one after-hours service call, and it keeps the manufacturer warranty valid on most equipment.
Geothermal Heat Pump Installation in Lexington
Geothermal heat pump installation in Lexington is a bigger conversation because it involves ground loops or a well system, and the price is more variable than an air-source swap. Most geothermal projects start in the $20,000 – $35,000 range after available incentives, but Lexington’s Green Community designation and Massachusetts rebate programs can shift the math considerably. If you’re serious about geothermal, we’ll run the full site assessment and give you a written load calculation before we quote a single dollar.
Ground Loop Considerations
Lexington lots vary from tight downtown parcels to acre-plus properties off Lowell Street. The loop configuration, horizontal, vertical, or pond loop, depends on land available and soil conditions. We coordinate the drilling or trenching with licensed local contractors we’ve worked with before, and we handle the rebate paperwork through Mass Save and any applicable federal credits. You get one point of contact.
When Geothermal Makes Sense
If you’re replacing an oil or propane boiler in an older Lexington home and already considering ductwork changes, geothermal can cut operating costs enough to justify the upfront spend. For homes with existing forced-air ductwork and a newer air-source heat pump, geothermal is usually not the best financial move. We’ll tell you which side of that line your house falls on. We’d rather talk you out of a $30,000 decision than into a bad one.
Trusted Brands We Service in Lexington
We install and service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means we’re not married to one manufacturer’s spec sheet or one distributor’s availability. If a Trane unit fits your home better than a Lennox, that’s what we’ll recommend. We keep common parts stocked for Lexington service calls, so a failed capacitor or contactor on a Bryant or Goodman unit doesn’t mean a three-day wait for a part to ship from Ohio.
Common Heat Pump Installation Problems We See in Lexington Homes
- Square-footage guessing instead of a load calculation. Many Lexington homes with heat pumps sized by rule-of-thumb end up short-cycling in summer and running backup electric resistance heat all winter. A Manual J calculation is the only way to match equipment to the house, and we run one on every install, not just when something feels off.
- Skipped static pressure testing. Lexington’s older homes often have ductwork that was sized for a gas furnace, not a heat pump’s lower-temperature airflow. If static pressure is off after install, the blower works harder, efficiency drops, and the motor dies early. We test and adjust on every job.
- Condenser coils packed with ice and debris. Freeze-thaw cycles in Lexington create repeated ice dams and melt-offs on exterior units. Leaves, pollen, and ice get packed into the coil fins and restrict airflow, which forces the system into defrost mode more often than necessary. Proper clearance and regular coil cleaning matter more here than in a milder climate.
- Undersized electrical panels on older homes. Homes built in the 1920s and 1930s off Massachusetts Avenue often have 100-amp panels that can’t support a heat pump’s startup draw. We check panel capacity before we quote, so you don’t find out about a $3,000 panel upgrade on install day.
Pricing for Heat Pump Installation in Lexington, MA
Here’s what Lexington homeowners should expect to pay for heat pump work, in writing:
| Service | Typical Range |
|---|---|
| Heat pump installation (replace existing system) | $3,500 – $7,500 |
| Heat pump maintenance / tune-up | $80 – $200 |
| Heat pump repair | $150 – $650 |
What moves the price: efficiency rating, brand, whether ductwork needs modification, and whether your electrical panel has spare capacity. A 16 SEER2 single-stage heat pump in a straightforward swap will land near the bottom of that range. A 20+ SEER2 variable-speed system with ductwork sealing and a new line set will run toward the top. Every quote we give is a fixed, written price. No allowances. No “we’ll see once we open the wall.” Call (361) 306-9515 for an exact quote on your Lexington home. Estimates are free.
We Also Serve Cities Near Lexington
Our install crews cover Lexington and the surrounding towns, so if you’re in Lexington today but your rental property is in Arlington, or you have family in Woburn, Winchester, or Burlington who need heat pump work, we can schedule them too. Same standard, same written pricing, same 365-day guarantee. For full details on our installation process and equipment options, see our Heat Pump Installation page.
Serving Lexington, MA - Our Local Coverage Area
We’re based in the Lexington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Lexington
If your heat pump is under 10 years old and the failure is a failed capacitor, contactor, or refrigerant leak, repair usually makes sense. In Lexington, typical heat pump repairs run $150 – $650. If the compressor is dead, the coil is leaking, or the system uses R-22 refrigerant that’s no longer manufactured, replacement is usually the better financial call. We’ll show you the repair quote and the replacement quote side by side, in writing, and let you decide. Call (361) 306-9515 and we’ll walk you through what your specific unit needs.
There’s no typical size, and that’s the point. Lexington’s housing stock spans 1920s Colonials to new net-zero builds, and since the town is a Green Community, heat pump sizing varies so widely that a load calculation on a 1925 Clarke Street house can call for two tons while a 2020 Lexington Center build needs four. The only way to size a heat pump correctly is a Manual J load calculation that accounts for insulation, window area, orientation, and air leakage. We run one on every install, and we’ll show you the numbers. If another contractor quotes you by square footage alone, walk away.
SEER2 is the updated efficiency rating standard for heat pumps, and it’s measured under more realistic operating conditions than the old SEER metric. A higher SEER2 means lower cooling-season electricity use. In Lexington, where air conditioning runs heavily from June through September, stepping from a 14.3 SEER2 unit to an 18 SEER2 unit can cut cooling-season electric consumption by 20 – 25%. The heating side matters more here, though, and that’s measured by HSPF2. We’ll show you both numbers for any equipment we quote, and translate them into expected annual energy use for your specific house.
Yes. Geothermal installation in Lexington is a larger project than an air-source swap because it requires ground loops, a well system, and often coordination with local drilling contractors. We handle the entire scope, from Manual J calculation through loop design, rebate paperwork, and final commissioning. Most Lexington geothermal projects run $20,000 – $35,000 after available incentives, but the exact number depends on your lot. Call (361) 306-9515 for a site assessment and an honest conversation about whether geothermal pencil out for your home.
Twice a year. Once in spring before cooling season, once in fall before heating season. Lexington’s freeze-thaw cycles put extra stress on outdoor units, and pollen from the town’s mature tree canopy packs into condenser coils every spring. A maintenance visit runs $80 – $200 and includes a full written report. If you skip it, the first sign of trouble is usually a higher electric bill or a system that quits during the coldest week of the year. Call (361) 306-9515 to schedule both visits for the year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Lexington since 2003.