Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Clovis
Heat pump installation in Clovis typically runs $3,500 to $7,500 for a complete system, and the job usually takes one to two days once the unit arrives. That price covers a properly sized heat pump, matching indoor coil, refrigerant, electrical connections, and a startup that verifies airflow and charge. At Dalton Heating & Air, we put that number in writing before any work begins, so the quote you approve is the price you pay. Call (361) 306-9515 for a free estimate from our Heat Pump Installation team, and we’ll come out to your Clovis home, take measurements, and give you a fixed price on the spot.
Key Takeaways
- Complete heat pump installation in Clovis runs $3,500 – $7,500 depending on tonnage and efficiency rating.
- Clovis’s fog-belt winters and 100°F-plus summers mean sizing matters more here than in milder climates.
- Every Dalton job includes written pricing before work starts and a full-year written guarantee.
- We service all nine major residential brands, including Rheem, York, and Daikin.
Why Dalton Heating & Air Is Clovis’s Preferred Heat Pump Installation Company
We’ve earned our reputation in Clovis by doing the job by the book and standing behind it, and our Clovis AC Repair team brings that same discipline to every cooling call. Dalton Heating & Air operates under The Garrison Standard, a set of rules that has governed how we work since 2003: arrive inside the stated window, put the price in writing before touching anything, do the work to code, leave the site clean, and cover the installation for a full year. That 365-Day Done Right Promise means if something isn’t right after we leave, we come back and make it right at no charge.
When a Clovis homeowner schedules with us, they know exactly who is showing up. Every technician is background-checked, uniformed, and factory-trained on nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Our crews live and work in the Central Valley, so they understand what Clovis summers do to an undersized system and what tule fog season does to defrost cycles. Calls are answered by a real person 24/7, not a voicemail queue.
Marco Benitez leads our team, and he holds every job to the same standard: written price first, clean install second, full-year guarantee third. That’s not a marketing line. It’s The Garrison Code, and it applies to every heat pump we put in across Clovis.
Ductless Heat Pump Installation in Clovis
Ductless Heat Pump Installation in Clovis is the right call for the older ranch homes and room additions you find all through this city, from the established blocks near Old Town Clovis to newer builds east of Clovis Avenue. Many Clovis homes have central HVAC, but add-ons, converted garages, and detached workshops often don’t have ductwork. Running new ducts to those spaces gets expensive fast. A ductless mini split – a wall-mounted indoor unit paired to an outdoor condenser – skips the ductwork entirely and gives you zoned heating and cooling for a fraction of the cost of a full ducted system.
Ductless heat pump installation in Clovis typically falls in the $3,500 – $7,500 range, depending on how many indoor heads you need and the system’s efficiency rating. A single-zone setup for a 400-square-foot bonus room runs on the lower end. A multi-zone system covering three or four rooms lands higher.
Where Ductless Makes Sense
Clovis homes built before central air was standard often have window units or electric baseboards in certain rooms. A ductless heat pump replaces those cleanly and quietly. We see a lot of these installs near the Clovis Rodeo Grounds and in older neighborhoods along Pollasky Avenue, where room additions went up decades ago without any thought given to tying into the original duct plan.
The Mini Split Install Process
We mount the indoor unit on an exterior wall, run the refrigerant line set through a small wall penetration, and set the outdoor condenser on a pad with proper clearance. The only visible wall damage is a hole about the size of a silver dollar, which we seal and cover with a line-hide channel. Power comes from a dedicated circuit, and we wire it to code before the startup test.
Heat Pump Service in Clovis
Heat Pump Service in Clovis keeps your system moving heat the way it should, and the cost runs $80 to $200 for a full tune-up or $150 to $650 for a repair. A heat pump is a two-way AC: in summer it pulls heat out of your house and dumps it outside, and in winter it reverses and pulls heat from the outside air into your home. That reversing valve and the defrost board are the parts most likely to cause trouble, especially after a Clovis winter of fog and cold mornings.
When we service a heat pump, we check the refrigerant charge against the manufacturer’s spec, test the capacitor, clean the condenser coil, inspect the reversing valve, and run the system in both heating and cooling. Clovis dust from the Valley’s agricultural land packs into outdoor coils fast, and a dirty coil alone can cut efficiency by 15 to 20 percent.
Repair vs. Replace for Clovis Heat Pumps
A compressor replacement on a 12-year-old heat pump rarely makes sense in Clovis. You’d be putting $2,000 or more into a system that still has an old fan motor, old coils, and a control board that’s seen a decade of Central Valley heat. At that point, the money goes further toward a new unit with a higher SEER2 rating and a fresh 10-year parts warranty. Our technicians give you an honest recommendation with numbers behind it, and they’re not paid on what they sell.
The Clovis Fog and Defrost Problem
Tule fog means moisture. Moisture means frost on the outdoor coil in winter. A heat pump’s defrost board has to cycle that frost off without letting your house go cold, and a failing defrost sensor or a weak reversing valve will leave you with lukewarm air in December. We see this pattern in Clovis every foggy winter, and the fix is usually a sensor or airflow adjustment rather than a new system.
Trusted Brands We Service in Clovis
We work on all nine major residential brands, and for Clovis customers that means we can source parts locally without waiting on a distributor to ship from out of state. Whether you have a Rheem heat pump that’s been running since the early 2010s or a newer York or Bryant variable-speed system, our techs know the wiring diagrams and the failure patterns. Daikin mini splits, common in Clovis room additions, are a specialty of ours, and we keep common replacement parts like capacitors, defrost sensors, and contactors stocked in our trucks. That means fewer second trips and faster repairs when your heat pump goes down in the middle of July.
Common Heat Pump Installation Problems We See in Clovis Homes
- Oversized units short-cycling. A 4-ton heat pump in a home that only needs 3 tons will fire up, blast cold air, and shut off before it removes enough humidity. In Clovis’s dry heat that might not sound like a problem, but short-cycling kills compressors years early. We see this constantly when homeowners let a cheap bidder size by “rule of thumb” instead of a real load calculation.
- Refrigerant charge left out of spec. A heat pump charged incorrectly at install won’t hit its rated SEER2 and won’t heat properly on cold Clovis mornings. The factory charge in the condenser covers a specific line-set length; add a longer line run and the tech has to add or remove refrigerant by weight. Skipped step.
- Duct static pressure never checked. A new heat pump gets blamed for weak airflow when the problem is actually a duct system that’s too small or too restrictive. In older Clovis homes with original flex duct, static pressure runs high, and the blower motor works against it. We measure static pressure on every heat pump install and tell you if the ducts need work.
- Skipped load calculation on square footage alone. Clovis demands heating and cooling that coastal cities don’t. A load calc that only considers square footage misses window orientation, insulation levels, and the fact that this house has to handle both 28°F fog nights and 105°F summer afternoons. That’s how you end up with a system that can’t keep up in August or short-cycles all winter.
Pricing for Heat Pump Installation in Clovis, CA
Here’s what heat pump work costs in Clovis. These are the numbers we quote from, and they match what Clovis homeowners should expect in this market.
| Service | Clovis Price Range |
|---|---|
| Heat Pump Installation | $3,500 – $7,500 |
| Heat Pump Repair | $150 – $650 |
| Heat Pump Tune-Up | $80 – $200 |
What moves the installation price is tonnage, efficiency, and the condition of your existing ductwork. A basic 14.3 SEER2 single-stage heat pump for a smaller Clovis home lands near the bottom of that range. A high-efficiency variable-speed Daikin or Rheem system with a communicating thermostat runs toward the top. Every estimate we give is a written, line-item price, and it does not change unless we find something structural hidden in the wall or the ducts – in which case we stop and show you before adding a dollar. Call (361) 306-9515 for a free, no-commitment quote.
We Also Serve Cities Near Clovis
Dalton Heating & Air runs crews throughout the Central Valley, so if you’re in Clovis or in Fresno, Sanger, Fowler, or Madera, we can usually get a technician to you the same day. Dispatch and scheduling are coordinated from our Fresno, Central Valley office, but the trucks and the techs are local to the area. Same written pricing, same full-year guarantee, same Garrison Code. Call (361) 306-9515 and tell us which city you’re in.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Clovis
A load calculation is required, not optional, for a heat pump in Clovis. Square footage alone misses the fact that this city has a real heating season and a brutal cooling season. Clovis sits in the San Joaquin Valley’s fog belt, where winter tule fog holds temperatures near freezing for days while summer drives highs well past 100°F. A load calc – Manual J, if you want the trade term – accounts for window orientation, insulation, airtightness, and internal heat gain, and it tells us the exact tonnage and the right CFM for your ductwork. We run one on every install, and we’ll show you the results. Call (361) 306-9515 to schedule a site visit.
SEER2 is the current efficiency rating for heat pumps, and it’s measured under conditions closer to real-world duct pressure than the old SEER number. In Clovis, a higher SEER2 rating directly cuts your PG&E bill because your system runs almost year-round for heating and cooling. Going from a 14.3 SEER2 to an 18 SEER2 heat pump typically drops cooling costs by 20 to 25 percent. With Clovis’s dual heating and cooling demand and PG&E’s higher tier rates kicking in fast, that efficiency difference shows up on every bill, not just in August. Our quote always shows the SEER2 rating for every system we propose.
Replace the heat pump if the compressor failed, the unit is over 12 years old, or the repair bill exceeds $2,500. Repair it if the issue is a capacitor, a defrost sensor, a contactor, or a refrigerant leak that’s still on the refrigerant lines and not in the coil. In Clovis, where a heat pump runs hard through both fog and 100°F heat, a 10-year-old system is already past its best years. Our techs give you a straight answer with the repair cost and the replacement cost side by side, and there’s no sales commission pressure. Call (361) 306-9515 for an honest assessment.
Heat pump installation in Clovis runs $3,500 to $7,500 for a complete system. That’s the installed price, including the outdoor unit, indoor coil, pad, electrical whip, refrigerant, startup, and a full-year guarantee. A basic single-stage unit for a smaller home falls near $3,500. A variable-speed high-efficiency system with zoning or a multi-head ductless setup runs toward $7,500. Get an exact quote by calling (361) 306-9515 – we come out, take measurements, and hand you a written price before we do anything else.
Yes, ductless mini splits are a clean fit for Clovis homes without ductwork, and we install them regularly. The indoor wall unit connects to an outdoor condenser through a small three-inch opening, so there’s no need to run ducts through attics or crawl spaces. For Clovis room additions, converted garages, and the older stock near Old Town, a ductless system gives you heating and cooling without the cost and mess of retrofitting a ducted system. Prices run in the same $3,500 – $7,500 range as the rest of the job. Call (361) 306-9515 for a free estimate, and we’ll tell you what a ductless system would cost for your specific layout.
Call Dalton Heating & Air for Heat Pump Installation in Clovis, CA
If you’re in Clovis and you’re looking at a heat pump install, call (361) 306-9515. We’ll set a time that works, show up inside the window, take measurements, and hand you a written price before any work begins. Every installation is covered by our 365-Day Done Right Promise, and every repair or tune-up includes a written guarantee. Marco Benitez and the rest of the Dalton crew have been holding jobs to The Garrison Standard since 2003, and we’re ready to bring that same standard to your home. Estimates are free, and there’s no pressure to sign the same day.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Clovis under The Garrison Standard since 2003.