Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Baltimore
A new heat pump installation in Baltimore runs $3,500 to $7,500 for a standard split system, and the job is scheduled ahead with a written fixed price before any equipment is ordered. Dalton Heating & Air serves the whole Baltimore area with factory-trained techs who do a real load calculation on every install, not a same-size swap. You’ll know the price, the install date, and the name of the tech before we arrive. Call (361) 306-9515 for a free in-home estimate.
Why Dalton Heating & Air Is Baltimore’s Preferred Heat Pump Installation Company
Homeowners in Baltimore call us because we show up inside the window and put the price in writing before work starts. That’s the Garrison Standard, and it’s non-negotiable on every job we do here. We’re not the cheapest bid in Baltimore, and we don’t try to be. We’re the crew you hire when the last guy didn’t show, or showed and charged $800 more than he quoted.
Every tech on a Baltimore job is background-checked, uniformed, and factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, and the other major brands. When you book with us, you get a text with the tech’s name and photo before they pull up. No mystery contractors. No subcontractor roulette.
We’ve built a strong local reputation in Baltimore by doing exactly what the quote says, cleaning up the work area, and standing behind the install for a full year. If something isn’t right, the 365-Day Done Right Promise means we come back and fix it. No argument.
Marco Benitez leads our team, and he holds every install to The Garrison Code: arrive on time, price in writing, do the job by the book, leave the site clean, stand behind the work for a full year. That’s the standard. Nothing less.
Ductless Heat Pump Installation in Baltimore
Ductless heat pump installation is the right call for a lot of Baltimore homes, especially older rowhomes where running new ductwork would chew up closets and ceilings. Instead of ducts, we mount a slim indoor unit on the wall and connect it to an outdoor condenser with a small refrigerant line set. One outdoor unit can drive up to four indoor heads, so you can heat and cool individual rooms independently.
Baltimore’s housing stock includes a lot of homes built before central air was standard. Ductless gives those homes real comfort without tearing open walls. It also sidesteps the undersized-ductwork problem we see all over Baltimore’s older neighborhoods, which is one of the biggest reasons a new conventional heat pump underperforms.
Pricing for a ductless system lands in the same $3,500 to $7,500 range as a standard split, depending on how many indoor heads you need. A single-zone setup sits at the lower end. A four-zone system covering multiple Baltimore bedrooms runs higher.
Single-Zone Ductless Systems
A single-zone ductless system in Baltimore heats and cools one room or open area. It’s the least expensive ductless install and the fastest to commission. For a finished attic, a garage conversion, or a room that never gets comfortable, this is the cleanest fix.
Multi-Zone Ductless Systems
A multi-zone ductless setup lets a Baltimore homeowner condition up to four separate rooms from one outdoor unit, each with its own thermostat. That’s useful in rowhomes where upper floors bake in July while the first floor stays cool. Each zone runs independently, so you’re not paying to condition empty rooms.
Heat Pump Service in Baltimore
Heat pump service in Baltimore keeps a system running at whatever efficiency its SEER2 rating promises. The main service tasks are a coil clean, thermostat calibration, capacitor test, and refrigerant check, all of which run $80 to $200 for a standard tune-up. If we find a failed capacitor or a low refrigerant charge during that visit, the repair is quoted separately with a written price before we touch anything else.
Neglect a heat pump in Baltimore’s humid summers and the outdoor coil loads up with cottonwood and grass clippings, which drives the compressor hotter and shortens its life. A $150 capacitor caught during a tune-up is a lot cheaper than a $4,500 compressor failure in January, which is exactly the call we don’t want you making.
Dalton Heating & Air services all nine major residential brands, so if your Baltimore home has a Trane, Lennox, Goodman, or Rheem heat pump, we have factory training and local parts access for it. The price is in writing before we start, and every repair carries a written one-year guarantee. If the repair fails inside that year, we come back at no charge.
Coil Cleaning and Airflow Correction
A dirty evaporator coil in a Baltimore heat pump does two things: it starves the coil of airflow and it drags efficiency down by 10 to 15 percent. We clean the coil, check static pressure, and correct airflow restrictions. That’s preventive work that shows up directly on the utility bill.
Refrigerant Charge Verification
When we set a heat pump’s refrigerant charge by weighing it in or by subcooling, the system meets its rated heating capacity at the exact winter design temperature Baltimore hits. A charge set by feel loses capacity right when you need it most, which is why we verify charge on every heat pump service call.
Trusted Brands We Service in Baltimore
Our techs are factory-trained and we keep common parts stocked for Trane, Lennox, Goodman, and Rheem heat pumps, which means less waiting when a Baltimore system needs a repair. We also service Carrier, York, Daikin, Bryant, and American Standard. Whatever brand is on the label, we can diagnose it, source the right part, and stand behind the work with a written one-year guarantee. You don’t need to call three different companies in Baltimore to cover three different systems in the same house. One crew handles all nine brands.
Common Heat Pump Installation Problems We See in Baltimore Homes
- Undersized ductwork in older rowhomes. Baltimore’s pre-1980 rowhomes were often built with ducts sized for a furnace, not a modern high-efficiency heat pump. When a contractor bolts a bigger heat pump onto those ducts, static pressure spikes, the system short-cycles, and the blower motor burns out early. We measure static pressure and correct the ductwork or right-size the unit before install.
- Same-size replacement without a load calculation. A lot of Baltimore installers just swap in the same tonnage as the old unit. In a climate that swings from single-digit January mornings to humid 90-degree July afternoons, that means a system oversized for cooling and undersized for heating. The load calculation is what stops that.
- Refrigerant charge set by feel. The old “beer can cold” method leaves a heat pump undercharged enough to lose heating capacity exactly when Baltimore’s winter design temperature arrives. We weigh in or subcool every charge so the system meets its rated output.
- No surge protection on the outdoor unit. Baltimore gets strong summer thunderstorms, and a close lightning strike or power surge can fry a heat pump’s inverter board. We recommend and install surge protection on every heat pump we put in here. It’s cheap insurance against a $700 board replacement.
Pricing for Heat Pump Installation in Baltimore, OH
Here are the real numbers for Baltimore. A standard split heat pump install runs $3,500 to $7,500. Most repair work lands between $150 and $650, and a full heat pump tune-up costs $80 to $200. The table below shows what each line item covers.
| Service | Price Range | What It Includes |
|---|---|---|
| Standard split heat pump install | $3,500 – $7,500 | Load calculation, new outdoor unit and indoor air handler, new thermostat, refrigerant, full system startup and test |
| Heat pump repair | $150 – $650 | Capacitor, refrigerant charge, blower motor, contactor, control board, fan motor |
| Heat pump tune-up | $80 – $200 | Coil clean, thermostat calibration, capacitor test, refrigerant check, safety inspection |
What moves the install number is tonnage, SEER2 rating, and whether the existing ductwork needs correction. A 3-ton 15 SEER2 heat pump with good ducts lands at the lower end. A 5-ton 20 SEER2 unit with duct sealing and a new line set runs toward the top. Every estimate includes a written fixed price before you sign anything. Call (361) 306-9515 and we’ll send a tech to your Baltimore home for a free in-home assessment.
We Also Serve Cities Near Baltimore
Beyond Baltimore, our crews cover Pickerington, Hebron, Pataskala, and Canal Winchester. If you’re in one of those towns and need Heat Pump Installation, the same written-pricing standard applies. We schedule out of our dispatch office and route techs across the whole area, so you get the same crew discipline whether you’re in Baltimore or ten minutes outside it. Check our Baltimore page for full local coverage details.
Serving Baltimore, OH - Our Local Coverage Area
We’re based in the Baltimore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Baltimore
Yes, a modern heat pump handles Baltimore’s winter on its own in most homes. Units built today hold rated heating capacity down into the teens, and Baltimore’s winter design temperature rarely goes below 10°F. What matters is that the unit is sized on the heating load, not the cooling load, which is where a real load calculation changes everything. For older Baltimore homes with poor insulation and drafty windows, a dual-fuel setup with a small gas furnace as aux heat can still make sense, but a properly sized heat pump alone works for most houses here. Call (361) 306-9515 and we’ll run the numbers on your specific home.
A load calculation changes the tonnage we install. Baltimore rowhomes run hot upstairs and cold on the first floor, and a same-size swap just locks in that imbalance. The load calc tells us exactly how many BTUs each floor needs in heating and cooling, so we right-size the unit and correct airflow rather than guessing. In a lot of Baltimore rowhomes, the answer is a smaller unit than the old one, paired with duct correction and a variable-speed air handler that compensates for the long runs. The result is a system that holds temperature without cycling on and off every ten minutes.
At 12 years old, the repair-versus-replace math tilts toward replacement if the system is an R-22 unit and the repair is a compressor, reversing valve, or indoor coil. Those parts are getting expensive and hard to source, and you’d be putting $600 into a system that’s already past its design life. If the repair is a capacitor or contactor, the repair makes sense and we’ll guarantee it in writing for a full year. The honest answer for most Baltimore homes is this: a $600 repair on a 12-year-old heat pump usually buys you one more season, maybe two. A new system gets you a fresh 10-year parts warranty and modern efficiency. Call (361) 306-9515 and we’ll give you both numbers and let you decide.
SEER2 is the efficiency rating under new federal testing standards, and the difference between a 14 SEER2 and a 20 SEER2 heat pump in Baltimore is roughly 25 to 30 percent less electricity for the same cooling output. That’s a real line item on a summer bill in a city where the AC runs hard from June through September. The same principle applies in heating mode through HSPF2. We’ll show you the estimated annual operating cost for each efficiency tier we quote, so you can compare the upfront price against the long-run bill.
For a no-heat call in Baltimore in January, our target is same-day service. We answer the phone with a live person 24/7, and we prioritize no-heat emergencies when outdoor temperatures are below freezing because that’s when a failed heat pump becomes a real health risk. We’ll give you a window when you call, and the tech will call or text before arriving. Call (361) 306-9515 any time, day or night, and a dispatcher will get you on the schedule.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Baltimore and the surrounding area.