Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Upper Arlington
Furnace repair in Upper Arlington typically runs $150 – $700, and most no-heat calls here can be diagnosed and fixed the same day. Dalton Heating & Air serves every neighborhood in Upper Arlington with background-checked, uniformed technicians who put the price in writing before any work starts. Our crews know the housing stock here – the 1920s colonials off Cambridge Boulevard, the 1950s ranches near Tremont Road – and we baseline static pressure on every furnace call because older Upper Arlington ductwork tells a story newer systems can’t. Call (361) 306-9515 any hour, day or night, and a live person answers. No voicemail queue, no callback window.
Why Dalton Heating & Air Is Upper Arlington’s Preferred Furnace Repair Company
Upper Arlington homeowners call us for the same reason they left their last HVAC company: they got tired of no-shows and prices that shifted at the door. Dalton Heating & Air is a Garrison Partners company founded in 2003, so every job here is held to The Garrison Standard. That’s not marketing language. It means a written price before any work begins, a written guarantee on every repair, and a free return visit if the repair fails within the guarantee period. Marco Benitez, who leads our team, has built the Upper Arlington operation around that standard.
Response time to Upper Arlington matters. When the temperature drops into the teens and a furnace quits on a house off Riverside Drive, waiting on a callback is not acceptable. Our live phone support is staffed by a real person 24/7, and our technicians carry parts for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard units. That means fewer return trips and more same-day fixes for Upper Arlington homes.
We also know what the houses in this city actually need. Upper Arlington’s 1920s – 1950s housing stock is beautiful, but much of it still runs on original gravity-fed ductwork or early trunk-and-branch retrofits. A furnace that works fine in a newer Dublin townhome can suffocate on static pressure in a 1940s Upper Arlington colonial. That local knowledge changes how we diagnose, what we quote, and whether a repair even makes sense.
Boiler Repair in Upper Arlington
Boiler repair in Upper Arlington runs $150 – $700, and it’s a service we handle for the older homes that still rely on hydronic heat, particularly in neighborhoods like Old Arlington and the streets north of Lane Avenue. A boiler repair here usually means a failed circulator pump, a stuck zone valve, or an expansion tank that’s waterlogged and no longer holding pressure. In Upper Arlington’s older radiator systems, the boiler itself often outlasts the components around it – so a no-heat call is frequently a $150 – $400 fix on a pump or valve rather than a full boiler replacement.
Circulator Pump and Zone Valve Work
When a circulator pump seizes, the boiler fires but the water never moves, so radiators stay cold. We test pump amperage and inspect the zone valves before quoting anything. Most pump replacements on Upper Arlington systems land in the $150 – $450 range. Zone valve repairs typically run $200 – $500 depending on how many zones the home has.
Expansion Tank and Pressure Issues
A failed expansion tank lets system pressure spike, which can trip the boiler’s safety controls. On Upper Arlington homes with original piping, we also check the pressure-reducing fill valve and the air vents on each radiator. The fix is often simple, but catching it early prevents a mid-winter shutdown when single-digit temperatures hit the Columbus metro.
Gas Furnace Repair in Upper Arlington
Gas furnace repair in Upper Arlington covers everything from a dead ignitor to a cracked heat exchanger, and most jobs fall between $150 and $700. The majority of gas furnaces in this city are forced-air systems running on natural gas, and Upper Arlington’s design temperatures in January mean these units log serious runtime every winter. That sustained load is exactly why we combustion-analyze any furnace older than 15 years before we quote a repair – a crack in the heat exchanger is not something you guess at, especially in homes where carbon monoxide detectors are the only line of defense.
Ignitor and Control Board Replacement
A furnace that won’t fire is often just a failed hot-surface ignitor – a simple $150 – $350 repair. Control boards fail less often but cost more, typically $300 – $650 on Upper Arlington systems. We diagnose with a multimeter, not a guess, and we show you the reading before we replace the part.
Heat Exchanger and Safety Repairs
Heat exchanger repair, which means sealing or replacing the component that separates combustion gases from your breathing air, runs $200 – $700 depending on the unit. We never patch a cracked exchanger. If the metal has fatigued, we’ll tell you straight: this is a carbon monoxide risk, and the right call is usually replacement. Safety caveat: never attempt to inspect or repair a heat exchanger yourself. Trained professionals use combustion analyzers to identify cracks that aren’t visible to the naked eye. Call us instead.
Trusted Brands We Service in Upper Arlington
Our techs are factory-trained on nine major residential HVAC brands, and in Upper Arlington we see a lot of Trane, Lennox, Goodman, and Rheem units – some still original to the 1990s. We stock common ignitors, capacitors, control boards, and blower motors for these brands locally, which shortens the time between a diagnosis on a street off Fishinger Road and a finished repair. Whether your furnace is a 2001 Trane or a newer Lennox installed a few years ago, our van’s inventory is built for the units actually sitting in Upper Arlington basements, not a generic stock list.
Common Furnace Repair Problems We See in Upper Arlington Homes
- Short-cycling on older retrofit ductwork. High static pressure – often above 0.8 inches of water column on the original trunk-and-branch systems in Upper Arlington’s 1920s – 1950s homes – sends the high-limit switch into protection mode before a cycle finishes. The symptom looks like a thermostat problem, but a manometer tells the real story, and the fix is usually duct or blower work, not a new thermostat.
- Cracked heat exchangers in aging Carrier and Trane units. Many Upper Arlington furnaces from the 1990s and early 2000s were never combustion-analyzed, and the colder design temperatures here keep them running longer each season. Metal fatigue sets in quietly. We check every one of them with a combustion analyzer.
- Failed blower motors and weak capacitors. Years of fighting undersized return-air paths wear out blower motors, especially on homes with combination heat-pump-and-furnace setups that run through humid Ohio Valley summers. A five-minute capacitor test often catches the weakness before the motor actually dies.
- No-heat calls from failed ignitors on cold mornings. The first truly cold snap of the season is when ignitors give out, and Upper Arlington sees that pattern every November. It’s a $150 – $350 fix usually done same day.
Pricing for Furnace Repair in Upper Arlington, OH
Here’s what furnace repair actually costs in Upper Arlington, written plainly.
| Service | Typical Cost Range |
|---|---|
| Gas furnace diagnostic and capacitor replacement | $150 – $350 |
| Gas furnace repair – blower motor, ignitor, control board, or heat exchanger repair | $200 – $700 |
| Boiler repair – circulator pump, zone valve, or expansion tank | $150 – $700 |
What moves the price is the part, not the labor rate. A failed ignitor on a Goodman furnace is a quick $150 – $250 job. A blower motor on a Trane with an ECM motor lands closer to $500 – $700. Before any work starts, you get a written price. That’s The Garrison Standard. Call (361) 306-9515 for a free estimate, and Marco Benitez or one of our techs will walk you through the numbers before anything is touched.
We Also Serve Cities Near Upper Arlington
Dalton Heating & Air handles furnace repair for Upper Arlington and the surrounding communities, including Upper Arlington proper as well as Columbus, Cleveland, Parma, and Lorain. If you’re in one of those areas and your furnace is down, the same written-pricing standard applies. Our dispatch and scheduling is coordinated from the brand’s Cleveland office, and crews serve Upper Arlington locally.
Serving Upper Arlington, OH - Our Local Coverage Area
We’re based in the Upper Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Upper Arlington
The deciding factors are the age of the unit, the condition of the heat exchanger, and the static pressure on your existing ductwork. In Upper Arlington, a 22-year-old Carrier gas furnace with a cracked heat exchanger and a blower motor drawing over nameplate amperage is almost always a replace conversation, not a repair. But a 10-year-old furnace with a failed ignitor is a $150 – $350 fix. We run the numbers before we recommend either one. Call (361) 306-9515 and we’ll give you an honest read.
Short-cycling in Upper Arlington homes is usually not the furnace at all – it’s the static pressure. Houses built in the 1920s through 1950s often have original gravity-fed ductwork or early retrofit trunk-and-branch systems that weren’t sized for modern high-efficiency furnaces. When static pressure climbs above 0.8 inches of water column, the high-limit switch trips before the cycle finishes. The repair that sticks is usually duct or blower work, not another thermostat. We measure static pressure before quoting anything.
Most furnace repairs in Upper Arlington run $150 – $700. A gas furnace diagnostic and capacitor replacement is $150 – $350. Blower motor, ignitor, control board, or heat exchanger work runs $200 – $700. Boiler repairs on hydronic systems – circulator pump, zone valve, or expansion tank – fall in the $150 – $700 range too. The written price you get before work starts is what you pay. No shift at the door. Call (361) 306-9515 for an exact quote – estimates are free.
Yes, and it’s one of the biggest mistakes we fix in this city. A Manual J load calculation on an older Upper Arlington home often shows the previous installer left an oversized furnace. That oversized unit cycles too often, runs inefficiently, and shortens its own life – plus it fights against ductwork that was never designed for it. Our field vignette from Old Arlington: a homeowner’s 22-year-old Carrier gas furnace was short-cycling on limit within four minutes of a call for heat. We found a cracked heat exchanger and a blower motor drawing 2.1 amps over nameplate. After a full load calculation on the original ductwork, we recommended a right-sized Lennox furnace rather than another oversized unit, and the post-install static pressure dropped from 0.94 to 0.52 inches of water column. That’s the difference a load calculation makes.
SEER2 is the new efficiency-rating standard for heat pumps and air conditioners, and it uses a tougher testing method than the old SEER ratings. For an Upper Arlington furnace, though, SEER2 matters less than the system’s AFUE rating – how efficiently it turns gas into heat. The real bill mover in this city is whether your furnace is fighting your ductwork. A right-sized, properly matched furnace on corrected static pressure will outperform a high-efficiency unit choking on legacy ductwork. If you’re replacing, ask about the rating, but first ask for a static pressure baseline. The numbers tell you what’s actually going on.
Get Your Upper Arlington Furnace Fixed Today
When your furnace is down and the temperature outside is dropping, you don’t need a callback window. You need a real person on the phone and a tech who shows up inside the stated window with parts for Trane, Lennox, Goodman, Rheem, and more. That’s how Furnace Repair works with Dalton Heating & Air. Every repair includes a written price before work starts, a written guarantee for a full year, and a free return visit if the repair fails. If it’s not done right, we make it right. That’s the 365-Day Done Right Promise, and it applies to every furnace repair we do in Upper Arlington. Call (361) 306-9515 now for a free estimate. A live person answers, 24 hours a day.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Upper Arlington.