Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Thompson’s Station
Most furnace repairs in Thompson’s Station run between $150 and $700, and we can usually have a background-checked technician at your door the same day you call. If your furnace is blowing cold air, short-cycling, or making sounds it should not be making, call (361) 306-9515 and you’ll get a live person, not a voicemail queue. We work on all nine major HVAC brands, so the fix is usually done in one visit with the part already on the truck.
Thompson’s Station sits on the western edge of Williamson County, where winter temperatures and wind exposure run slightly different than Franklin or Brentwood. That matters when a furnace is sized wrong or a heat exchanger fails under load. Our crews know the homes here, from the newer subdivisions to the older acreage properties, and we show up with written pricing before any work starts. No price-at-the-door surprises, ever.
Why Dalton Heating & Air Is Thompson’s Station’s Preferred Furnace Repair Company
Homeowners in Thompson’s Station call us because we operate under The Garrison Standard, a set of rules that has not changed since 2003. Every repair gets a written price before work begins. Every repair carries a written guarantee for a full year. If the work fails inside that year, we return at no charge. That is not an upgrade or a pitch. It is the default on every service call.
Our technicians are background-checked and uniformed, which means the person you see at the door is the person we said was coming. We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so we are not learning your furnace on the fly. The 365-Day Done Right Promise backs the labor, and our dispatch team answers phone calls around the clock, including weekends and holidays.
Thompson’s Station homeowners have told us the same thing for years: they were tired of no-shows and estimates that changed when the tech walked in. The Garrison Code fixes that. Arrive inside the stated window. Price in writing before starting. Do the job by the book. Leave the site clean. Stand behind the work for a year. It is that simple, and it is why people in this area keep our number saved.
Gas Furnace Repair in Thompson’s Station
Gas Furnace Repair in Thompson’s Station most often comes down to a failed ignitor, a dirty flame sensor, a worn blower motor capacitor, or a gas valve that will not hold pressure. Those repairs typically land between $150 and $450 depending on the part. A cracked heat exchanger is the serious one, and on a 15-to-20-year-old unit, that usually means replacement rather than repair. We will tell you straight which one you are looking at before any money changes hands.
Thompson’s Station sees enough freeze-thaw cycles that flame sensors and ignitors take real abuse. When the temperature swings hard in January, ignition components fail at the worst possible time. We keep common parts stocked on our trucks for Thompson’s Station calls, so most gas furnace issues get fixed on the first visit. If the heat exchanger is intact and the unit is under 12 years old, repair is almost always the smarter money.
Ignitor and Flame Sensor Service
A furnace that tries to start, clicks, and then shuts off usually has a dead ignitor or a carboned-up flame sensor. The flame sensor is the safety device that confirms the burners actually lit. We clean or replace it, verify the sequence with a multimeter, and you have heat again. This is one of the most common Thompson’s Station repair calls we run from November through February.
Gas Valve and Heat Exchanger Diagnosis
If the burners light but the flame is weak or yellow, the gas valve may be failing or the heat exchanger may be cracked. We test gas pressure with a manometer and inspect the exchanger with a combustion analyzer. Combustion analysis catches cracks that a visual check misses, and that is the difference between a safe repair and a carbon monoxide risk. This is not a job for guesswork.
Furnace Tune Up in Thompson’s Station
Furnace Tune Up in Thompson’s Station runs $80 to $200 and is the cheapest insurance you can buy against a mid-winter breakdown. We inspect the heat exchanger, test the gas pressure, clean the flame sensor and burners, check the blower motor and capacitor, and measure the temperature rise across the furnace. Then you get a written report of what we found, what we fixed, and what might need attention before next season.
We recommend a tune-up every fall, before the first hard freeze. Thompson’s Station homes sit in a climate where furnaces run hard for four to five months a year. Soot buildup, a weakening capacitor, or a heat exchanger developing a hairline crack all show up during a tune-up, not on the coldest night of the year. For $80 to $200, you buy peace of mind at a fraction of what an emergency repair costs.
What the Written Report Tells You
Our technicians are not paid on what they sell, so the report is honest. You will see actual measurements, not a vague “everything looks good.” The report tells you the age and condition of the major components, whether the system is operating within manufacturer specs, and whether a repair now will prevent a larger failure later.
When a Tune-Up Catches a Bigger Problem
Sometimes a tune-up uncovers a heat exchanger crack or a gas valve that is out of tolerance. In those cases, we show you the measurement, explain the risk in plain language, and give you a written repair quote. If the furnace is at the end of its life, we will talk replacement honestly and show you the numbers. No pressure. No fear tactics. Just the facts.
Trusted Brands We Service in Thompson’s Station
Our techs are factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, and we carry repair parts for all nine brands on our local trucks. That means when a Goodman gas valve fails or a Rheem ignitor quits in Thompson’s Station, we are not ordering parts and rescheduling. Parts like flame sensors, ignitors, capacitors, and pressure switches for Lennox and York units are typically on hand. If your furnace is a less common configuration, we source parts same-day from local supply houses and keep the repair on schedule.
Common Furnace Repair Problems We See in Thompson’s Station Homes
- Oversized furnaces that short-cycle. Many larger new-build homes in Thompson’s Station got furnaces spec’d off square footage instead of a real load calculation. The result is a unit that heats the house too fast, shuts off, and starts again minutes later, which hammers the heat exchanger and wastes gas. We see this constantly in the newer subdivisions off Buckner Road and in the Fields of Harvest area.
- Dead blower motor capacitors during freeze-thaw cycles. Middle Tennessee’s winter swings put extra strain on blower capacitors, and when the capacitor fails, the blower will not spin. The furnace lights but no warm air moves through the house. This is a quick fix, usually under $200, and we keep capacitors in stock for all major brands.
- High static pressure in slab-on-grade duct systems. Homes built on slabs in Thompson’s Station often have ductwork that is undersized or restricted, which drives up static pressure and forces the furnace to work harder. Over years, that added stress shortens heat exchanger life. We measure static pressure as part of any thorough furnace diagnosis.
- Neglected heat exchangers in aging furnaces. A 15-year-old furnace that has never had a combustion analysis is a gamble. Thompson’s Station winters run long enough that small cracks turn into big ones, and a cracked heat exchanger is a carbon monoxide hazard. We check it with a combustion analyzer on every furnace repair call, not just when there is an obvious symptom.
Pricing for Furnace Repair in Thompson’s Station, TN
Here is the straight answer on cost. A routine furnace repair in Thompson’s Station, like an ignitor replacement or flame sensor cleaning, runs $150 to $450. Larger jobs like a blower motor or gas valve can push toward $700. A full furnace tune-up runs $80 to $200. These are the ranges we quote over the phone, and the written quote you get before work starts will match them. No surprises at the door.
| Service | Typical Price Range |
|---|---|
| Furnace repair | $150 – $700 |
| Furnace tune-up | $80 – $200 |
What changes the final number is the part and labor time. An ignitor swap is quick and cheap. A blower motor replacement takes longer and costs more. We give you the exact price in writing before any work starts, so you can decide with real numbers instead of a sales pitch. Estimates are free. Call (361) 306-9515 and we will walk you through it.
We Also Serve Cities Near Thompson’s Station
Our crews cover Thompson’s Station and the surrounding communities, including Nashville-Davidson, Knoxville, Murfreesboro, and Franklin. If you are outside Thompson’s Station proper but in one of those areas, we can still get a technician to you fast. For the full picture on our Furnace Repair services or to learn more about our work in Thompson’s Station, call (361) 306-9515 and we will get you scheduled.
Serving Thompson’s Station, TN - Our Local Coverage Area
We’re based in the Thompson’s Station area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Thompson’s Station
If your furnace is under 12 years old and the repair is under $500, repair usually makes sense. If the heat exchanger is cracked, the unit is over 18 years old, or the repair will cost more than 40% of a new system, replacement is the better call. In Thompson’s Station, we run that math with you on the spot with written numbers for both paths, so you decide on facts, not a sales pitch. Call (361) 306-9515 for an honest assessment.
A load calculation tells us exactly how much heating your specific house needs, based on insulation, window orientation, ceiling height, and local design temperatures. Thompson’s Station’s position on the western edge of Williamson County means winter design conditions here differ from Franklin or Brentwood, so a neighboring city’s rule of thumb does not apply. If your furnace was oversized because a previous installer skipped the load calculation, you have been paying for short-cycling and premature wear. We run a Manual J load calculation whenever replacement is on the table, and it changes the system size more often than you would think.
Most of the cold-air calls we run in Thompson’s Station during winter are a dead ignitor, a dirty flame sensor, or a failed blower motor capacitor. The burner never lights or the blower never spins, so the furnace just pushes unheated air through the house. These are quick fixes, usually $150 to $350, and we keep the parts stocked on our trucks. If the furnace is lighting but still blowing cold, it could be a gas valve or a control board issue. Call (361) 306-9515 and we will diagnose it on the first visit.
Once a year, in the fall, before the first hard freeze. Thompson’s Station furnaces run hard from late November through early March, and a tune-up catches soot buildup, weakening capacitors, and early heat exchanger cracks before they become mid-winter failures. The tune-up runs $80 to $200, and you get a written report of what we found. A homeowner in the Fields of Harvest neighborhood called us with a Carrier gas furnace that kept tripping its high-limit switch every few hours. Our tech found a cracked heat exchanger, verified it with a combustion analyzer, and the 20-year-old unit needed replacement. A yearly tune-up would have caught that crack before it became an emergency. Call (361) 306-9515 to schedule yours.
For Thompson’s Station’s climate, a SEER2 rating of 15 to 16 on the AC side paired with a 92% to 96% AFUE furnace is the sweet spot for most homes. Going higher costs more upfront and takes longer to pay back through utility savings unless your home is large or runs the AC heavily through the humid summers. We will run the numbers for your specific house, including rebate eligibility, before you commit to anything. The price is in writing before any work starts. Call (361) 306-9515 for a free estimate.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Thompson’s Station and surrounding communities.