Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Ashland, CA
Dalton Heating & Air is the HVAC company in Ashland, CA that puts the price in writing before any work starts. Ashland sits in a warm inland pocket of Alameda County where summer heat settles into the hills and older ductwork works harder than it should. Whether you need a same-day AC repair, a furnace that lights on the first cold morning, or a heat pump sized right for your home, we show up inside the window we give you, background-checked and ready. Call (361) 306-9515 for a free estimate.
Why Ashland Homes Are Different
Ashland’s housing stock runs older than a lot of the East Bay, and that changes the work. Many homes in the neighborhoods off East 14th Street and near Ashland Avenue were built between the 1940s and 1970s, which means undersized return ducts, original electrical panels, and closet spaces that were never designed for modern heat pump air handlers. We see a lot of split-level and ranch layouts here where one end of the house runs five degrees warmer than the other, and the fix usually starts with airflow, not just a bigger unit.
The microclimate matters too. Ashland gets real summer heat, but nights cool down into the 50s, so a system that short-cycles all afternoon and never pulls humidity out is a common complaint. Furnace calls cluster in December and January when the marine layer gives way to dry, cold mornings. And because Ashland sits close to San Lorenzo Creek, homes in lower-lying pockets deal with more dust and moisture around the condenser coil, which shows up as dirty coils and reduced cooling capacity during heat waves. None of this is exotic; it just means sizing and airflow have to be done right the first time.
Our Main Ashland Services
Most Ashland homeowners call us about two things: an AC unit that quit during a heat wave, or a furnace that will not stay lit. Heat pump installation is growing fast here as older systems age out, and each service has its own Ashland page with full pricing detail.
AC Repair in Ashland
When an air conditioner fails in Ashland in July or August, the problem is usually a failed capacitor, a contactor that is pitted and stuck, or a refrigerant charge that has leaked down over several seasons. Our technicians diagnose the exact fault before quoting anything, and the repair price goes in writing before work begins. Ashland’s older homes frequently have condenser units tucked into tight side yards, which means access matters and a clean finish is non-negotiable. Read the full breakdown on the AC Repair in Ashland page.
Heat Pump Installation in Ashland
Heat pumps make sense in Ashland because the climate rarely dips below freezing, so a properly sized unit can heat and cool the house without a gas furnace. Many homes here were built with electric baseboard or wall heaters, and converting to a heat pump is a practical upgrade. The install requires a load calculation for your specific floor plan, and our crews handle the electrical, permits, and refrigerant work end to end. Full details, including real pricing and what the install day looks like, are on the Heat Pump Installation in Ashland page.
Furnace Repair in Ashland
Ashland furnaces run hard on cold December mornings, and the most common failures we see are failed ignitors, dirty flame sensors, and limit switches that trip because of restricted airflow. An older furnace in a home with original ductwork is more likely to overheat and shut down, and a technician who only swaps the part without checking airflow is going to be back in two weeks. Every furnace repair gets a written guarantee. See the full pricing and detail on the Furnace Repair in Ashland page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ashland
Our technicians are factory-trained on Rheem, York, Daikin, and Bryant, among the nine major residential HVAC brands we service. We stock common capacitors, contactors, ignitors, and flame sensors on the truck, so most Ashland repairs are done in one visit. See our brands for the full list.
Pricing for HVAC Company in Ashland, CA
| Service | Typical range in Ashland |
|---|---|
| AC repair | $150 – $650 |
| Furnace repair | $150 – $700 |
| AC installation | $3,500 – $7,500 |
| Heat pump installation | $3,500 – $7,500 |
| Tune-up | $80 – $200 |
What pushes a repair toward the top of the Ashland range is usually age and access: a 25-year-old unit with a burned-out blower motor and a tight side yard costs more than a simple capacitor swap on a newer system. Regardless of the number, the price is written down before any work begins. That is not an option; it is how every Dalton job runs.
Neighborhoods We Serve in Ashland
We work across all of Ashland, from the older subdivisions near East 14th Street to the residential streets that climb toward the hills. Our crews are typically able to reach most Ashland homes within a couple of hours for a repair call.
- Ashland Heights
- Mission-Foothill
- Ashland Park
- San Lorenzo Creek corridor
Service Area – Cities Near Ashland
Dalton Heating & Air covers Ashland and the surrounding East Bay from our Bay Area dispatch office. If you are outside Ashland, we also serve San Jose, CA, San Francisco, CA, Los Angeles, CA, and San Diego, CA. Each area gets the same written pricing and guarantee.
Serving Ashland, CA - Our Local Coverage Area
We’re based in the Ashland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Ashland
Most Ashland repair calls are reached within a couple of hours. When you call (361) 306-9515, a real person answers and gives you a window before the technician is dispatched. Emergency calls are handled 24/7 with no overtime charge.
Most replacement and installation work in Ashland requires a permit, and Dalton handles the filing as part of the job. Repairs that swap a part do not typically need one. We can tell you on the phone whether your specific job will require a permit.
Yes. A tune-up in Ashland runs $80 – $200 and includes a written report of what was found. Scheduling a spring tune-up before the first real heat wave is the most reliable way to avoid a no-cooling call in July.
Call (361) 306-9515 for a free estimate on any HVAC work in Ashland. A live person answers, the price goes in writing before work starts, and every repair carries a full-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ashland Customers Say
"Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Tech arrived in uniform right on time. AC wasn't cooling, found a failed capacitor, and replaced it in twenty minutes. The owner is a veteran and the company runs like it."
- Frank O."Blower motor died on the coldest night. They had the part on the truck and had us warm again the same day."
- Sandy G.