Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Selma
Furnace repair in Selma typically runs $150 – $700, and most no-heat calls we handle are diagnosed and fixed the same day. Dalton Heating & Air has crews stationed to reach Selma quickly, usually within a couple of hours of your call, and our Furnace Repair in Selma starts with a written price before any work begins. If your furnace won’t light or the blower won’t spin, call (361) 306-9515 and you’ll get a live person, not a voicemail queue.
Selma’s short, dusty heating season shapes what breaks and when. We see ignition and flame-sensor failures more than anything else, because Valley dust settles inside the cabinet all summer and fouls the parts the furnace needs to light. Knowing that changes how we diagnose a call, which is why local experience matters more than a generic checklist.
Why Dalton Heating & Air Is Selma’s Preferred Furnace Repair Company
We’re a Garrison Partners company, operating under The Garrison Standard since 2003. That standard is specific: arrive inside the window you were given, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. Marco Benitez leads our team, and he holds every call to those terms. No exceptions, no fine print.
Selma homeowners call us for a reason that’s hard to find in the Central Valley: the price we quote is the price you pay. Our Furnace Repair team writes the number down before touching a component. If the repair fails within 365 days, we return free of charge. That’s the Done Right Promise, and it’s on every invoice, not hidden in a contract or offered as an upgrade. Our technicians are background-checked, uniformed, and factory-trained on nine major residential brands, including the ones most common in Selma homes: Goodman, Rheem, York, and Daikin.
Response time to Selma from our Central Valley dispatch is typically under two hours on a weekday. For a no-heat call on a cold January morning, that’s the difference between a rough start and a normal day. We also answer the phone with a live person 24/7, so when your furnace quits at 6 a.m., you’re talking to a human who can get a truck moving.
Furnace Tune Up in Selma
A Furnace Tune Up in Selma runs $80 – $200 and is the single best defense against the dust-related failures we see every winter. The job involves cleaning the flame sensor, checking the ignitor, testing the capacitor, measuring static pressure, inspecting the heat exchanger, and verifying the gas valve operates within spec. For a Selma home, the flame-sensor cleaning alone is worth the visit, because a fouled sensor is the number-one reason a furnace lights and then locks out.
What Gets Checked
Our techs follow a 21-point tune-up checklist that includes combustion analysis, temperature rise across the heat exchanger, and a leak check on the gas line. You get a written report of what was actually found, not a sales pitch. Our technicians are not paid on what they sell, which means the recommendation you hear is the one your furnace actually needs.
When to Schedule It
Schedule your tune-up in early fall, before the first real cold snap. In Selma, that usually means late September to mid-October. The earlier the better, because every summer of AC duty leaves the blower motor and capacitor a little closer to failure, and you want to catch that before heating season begins.
Emergency Furnace Repair in Selma
Emergency Furnace Repair in Selma covers the calls that can’t wait: no heat on a freezing morning, a gas smell near the furnace, or a burner that lights and then shuts off repeatedly. Most emergency repairs in the Selma market fall between $150 – $700, same as our standard repair range, and we don’t charge overtime. A no-heat emergency in a home with kids or elderly family is a health issue, not an inconvenience, and we treat it that way.
What Counts as an Emergency
No heat when the outside temperature is below 45 degrees. Gas odor, which means shut the furnace off and call us from outside the house. A blower motor that hums but won’t turn, which usually means a failed capacitor and a cold house that won’t improve on its own. Any of these gets a same-day response from our Selma crews.
Overnight and Weekend Calls
Our phones are staffed 24/7, and a human answers every call. Night and weekend dispatch to Selma works the same as weekday dispatch: a tech arrives inside the window, diagnoses the problem, and puts the repair price in writing before touching a part. No after-hours surcharge, no games with the clock.
Trusted Brands We Service in Selma
Our techs are factory-trained and carry parts for Goodman, Rheem, York, and Daikin furnaces on the truck, which means fewer return trips waiting on a part that’s not in the van. Selma’s housing mix includes a lot of newer Goodman and Rheem installs in the tract developments, plus older York and Daikin units in original-condition homes. That parts coverage matters when your furnace is down and you want heat the same day, not a “we’ll be back next week” scenario. Because we stock common Selma parts locally and dispatch from the Central Valley office, most common repairs are completed in a single visit.
Common Furnace Repair Problems We See in Selma Homes
- Flame sensor fouling from Valley dust and field debris: The furnace lights, runs for a few seconds, then drops out on a safety lockout. That’s the classic Selma failure mode, and it’s almost always a dirty flame sensor that needs cleaning or replacement.
- Failed run/start capacitor after summer AC duty: The blower motor hums but won’t spin when heating season arrives. Seven months of cooling-season work wears capacitors down, and the failure shows up on the first cold morning you ask the furnace to move air.
- High static pressure from dirty or undersized return ducts: Selma homes with older ductwork often have returns that are too small for the furnace they’re paired with. The result is overheating at the heat exchanger and a blower motor that dies years early.
- Ignitor failure from repeated short-cycling: Furnaces that cycle on and off too often burn through ignitors faster than they should. In Selma, short-cycling is common in homes where the thermostat is poorly located or the system was never sized correctly for the floor plan.
Pricing for Furnace Repair in Selma, CA
Furnace repair in Selma runs $150 – $700 for the vast majority of jobs. Here’s the breakdown, in writing, so you know what to expect before you call:
| Service | Typical Selma Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
The lower end covers one-part fixes like a flame sensor cleaning, ignitor replacement, or capacitor swap. The higher end covers multi-part jobs like a blower motor replacement plus a heat exchanger inspection. Every quote is written before work starts, and the written price includes the repair guarantee in full. Call (361) 306-9515 for a free estimate, and you’ll get the exact number, not a range.
We Also Serve Cities Near Selma
Our crews also cover Furnace Repair in Selma and the surrounding communities, including Fowler, Parlier, Kingsburg, and Reedley. If you’re in one of those towns and your furnace quits, the same response time and written pricing apply. Same standard, same guarantee, same live-answer phone line.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Selma
Repair is almost always the right call if your furnace is under 12 years old and the repair costs less than 30% of a replacement. Selma’s short, dusty heating season means furnaces here clock fewer total heating hours than they would in a colder climate, so a well-maintained unit often has years of life left even past the 12-year mark. Replacement is the better call when the heat exchanger is cracked, the system is undersized for the ductwork, or the repair cost approaches $700 and the unit is 15-plus years old, in which case you may want to consider our Heat Pump Installation in Selma. Call (361) 306-9515 and we’ll give you honest repair-versus-replace math, in writing, with no pressure for the sale.
Nine times out of ten in Selma, a lockout is a dirty flame sensor or a weak ignitor, both of which are $150 – $300 fixes. Valley dust settles on the sensor during the summer and bakes on the first time the furnace fires, creating a carbon layer that blocks the sensor’s ability to confirm flame. The fix is a cleaning or a sensor replacement, plus an ignition check. A lockout can also point to high static pressure from plugged filters or undersized returns, which is a system issue, not a part failure. Call us and we’ll diagnose it on the first visit, with the price in writing before any repair begins.
A furnace tune-up for a Selma home includes flame sensor cleaning, ignitor testing, capacitor and blower motor inspection, gas valve verification, heat exchanger inspection, and a combustion analysis. You also get a written report of what was actually found. Dust is the main variable in Selma, not freezing temperatures, so the tune-up focuses on the parts dust fouls and the airflow problems dust creates. $80 – $200, and we recommend it every fall before the first cold snap. Call (361) 306-9515 to schedule yours before the season fills up.
Most furnace repairs in Selma run $150 – $700. One-part fixes like a flame sensor or capacitor land around $150 – $300. Multi-part jobs like a blower motor plus a control board run $400 – $700. Every repair includes a written price before work starts, and the repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge. Call (361) 306-9515 and we’ll give you the exact figure for your furnace’s issue, free.
A proper Manual J load calculation sizes the furnace to your actual home, not a rule of thumb, which in Selma means you usually end up with a smaller, more efficient unit than a salesperson would quote off square footage alone. Selma’s heating demand is modest, so oversized furnaces short-cycle, burn out ignitors, and waste gas on a system that’s wrong for the climate. A load calc also factors in your ductwork’s static pressure, which is where Selma’s older homes often lag. When you’re ready to replace, we run the load calc before we quote a unit, and the price is written and locked. Call (361) 306-9515 for a free consultation on the right furnace for your home.
Selma’s position in the San Joaquin Valley means furnace season here is short, dry, and dusty rather than long and freezing, so the repairs we see most are ignition, flame-sensor, and blower-motor problems from summer dust and fall debris, not the cracked-heat-exchanger epidemic of colder climates. That’s why Selma homeowners get faster, more accurate diagnoses from a team that knows what the Valley does to a furnace.
We ran a no-heat call in Selma’s Floral Acres neighborhood on a Bryant furnace where the blower motor had seized after a summer of drawing Valley dust through a clogged filter. Our tech pulled static pressure readings, found the system was also a tonnage over on the return, replaced the blower motor and capacitor, and the homeowner had heat back the same afternoon. That’s what the Garrison Code looks like in practice: find the real problem, fix it in one visit, leave the site clean.
Marco Benitez and the Dalton Heating & Air team serve Selma, Fowler, Parlier, Kingsburg, and Reedley with written pricing, on-time arrival, and a full-year guarantee on every repair. If your furnace is down or running rough, call (361) 306-9515 now. A live person answers, and we’ll get a truck moving to Selma.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Selma and the Central Valley.