Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Pompano Beach
Furnace repair in Pompano Beach typically runs $150 – $700 depending on the part that failed, and most calls are handled same-day or next morning. What sets coastal furnace work apart here is salt, not cold weather. The ocean air that makes this city so livable also eats through burners, heat exchangers, and cabinet panels years before they’d fail in Fort Lauderdale or Coral Gardens. If your furnace is short-cycling, tripping a limit switch, or making a banging sound when it fires, call (361) 306-9515. We answer live, 24/7, and we’ll give you a written price before any wrench turns.
We run calls from Lighthouse Point down through central Pompano Beach and out toward the Turnpike all week, so a technician can usually be at your door within a couple hours of your call. Coastal units fail differently than inland ones, and our crews know what to look for before a small rust problem becomes a gas leak or a cracked heat exchanger.
Why Dalton Heating & Air Is Pompano Beach’s Preferred Furnace Repair Company
Dalton Heating & Air is a Garrison Partners company, which means every job we do in Pompano Beach follows one set of rules: arrive inside the stated window, put the price in writing before we start, do the work by the book, leave the site clean, and stand behind the repair for a full year. That’s The Garrison Code, and it applies to every call we run from a simple ignitor swap to a full heat exchanger replacement.
Homeowners in Pompano Beach keep our number because we don’t play the pricing games they’ve seen before. The price on the written estimate is the price on the final invoice. No add-ons at the door, no “while we’re here” surprises. Technicians are background-checked and uniformed, so you know exactly who’s walking up your driveway. And every repair carries The 365-Day Done Right Promise: if the work doesn’t hold, we come back and make it right at no charge.
Marco Benitez, who leads our South Florida operation, put it plainly: a repair isn’t finished until it’s written down, guaranteed, and the homeowner understands exactly what was done. That’s how we run every job in Pompano Beach, and it’s why neighbors refer us to neighbors.
Boiler Repair in Pompano Beach
Boiler repair in Pompano Beach is a different animal than furnace work because coastal humidity and salt air corrode the hydronic components, the circulator pumps, and the zone valves that inland customers rarely touch. We service boilers in older condos and small apartment buildings throughout Pompano Beach, particularly the stretches east of Federal Highway where buildings have seen decades of salt exposure. A boiler repair here typically runs $150 – $700 depending on whether we’re replacing a thermocouple, a circulator pump, or a pressure relief valve.
Circulator Pumps and Zone Valves
When a boiler fires but the radiators stay cold, the circulator pump is often the culprit. In Pompano Beach, the pump’s rubber seals and electrical contacts degrade faster because of humidity and microscopic salt residue in the air. We diagnose whether the pump motor is seized or the capacitor is dead, then give you a written quote before we touch anything.
Heat Exchanger and Burner Service
Boiler burners near the coast accumulate a chalky white oxidation that you won’t see in Coral Springs or Margate. That buildup reduces flame quality and can lead to incomplete combustion. We pull the burner assembly, clean the jets, inspect the heat exchanger for pinholes or cracks, and confirm carbon monoxide levels are within safe range before we button it back up.
Gas Furnace Repair in Pompano Beach
Gas furnace repair in Pompano Beach is our most common service call from late October through early March, even though the “cold” here rarely gets below 50 degrees. The issue isn’t hard freezes. It’s that most furnaces in Pompano Beach sit dormant for nine or ten months, and during that time the salty, humid air works on the heat exchanger, the burners, and the control board. A typical gas furnace repair here costs $150 – $700 depending on the failed component.
Ignitor and Flame Sensor Replacement
The ignitor is a ceramic piece that glows white-hot to light the gas. When it cracks from thermal stress or corrosion, the furnace tries to light, fails, and locks out. Our technicians carry common ignitors and flame sensors for Goodman, Rheem, York, and Daikin furnaces right on the truck, so most ignitor replacements are done in one visit without a return trip to the supply house.
Gas Valve and Burner Assembly
If you smell gas near your furnace in Pompano Beach, shut the unit off at the breaker and call us immediately, then call your utility provider. Gas valve failures happen more often in coastal homes because the valve’s internal solenoid contacts develop corrosion that prevents the valve from opening or closing properly. We test valve pressure, inspect the manifold, and replace the entire assembly when it shows signs of salt ingress. This is a job for a licensed technician, not a DIY fix. Gas is unforgiving.
Trusted Brands We Service in Pompano Beach
Our factory-trained technicians service nine major HVAC brands, and in Pompano Beach we work on a lot of Goodman, Rheem, York, and Daikin systems. We keep common furnaces and boiler parts stocked locally for Pompano Beach customers, from Rheem ignitors to York flame sensors to Goodman control boards. If your furnace is a Carrier, Trane, Lennox, Bryant, or American Standard, we carry those parts too, but the coastal heavyweights here are Goodman and Rheem, so we keep those parts deep.
Common Furnace Repair Problems We See in Pompano Beach Homes
- Salt-damaged heat exchangers: The ocean air settles into the welds and seams of gas furnace heat exchangers, causing surface rust that leads to hairline cracks. A cracked heat exchanger trips the limit switch and can release carbon monoxide into the home, which is why we recommend an annual inspection for any furnace within two miles of the beach.
- Corroded cabinet panels and burner assemblies: Condenser cabinet panels on heat pump systems rust through from the inside. When the cabinet loses structural integrity, moisture reaches the burner assembly and electrical connections. We’ve replaced burner compartments in Pompano Beach homes that were under eight years old, something we rarely see in Deerfield Beach or Coconut Creek.
- Humidity-roughened blower motor bearings: Salt-laden air is extremely abrasive to the sintered bronze bearings inside blower motors. Once the bearings start to whine or grind, static pressure rises, airflow drops, and the furnace overheats. We find this more in Pompano Beach properties east of Dixie Highway than in the neighborhoods farther west toward the Sawgrass.
- Condenser coil pinhole leaks on dual-fuel systems: Heat pumps paired with gas furnaces run their outdoor condenser coils in the same salt air the furnace cabinet fights against. The difference is the outdoor coil operates under higher pressure, so a tiny pinhole becomes a refrigerant leak faster. We offer coated-coil replacements for any condenser in Pompano Beach that’s lost its original corrosion protection.
Pricing for Furnace Repair in Pompano Beach, FL
Here’s the straight math we show every Pompano Beach customer before work begins. These are written-price ranges, not vague ballparks. The final written quote depends on what we find during diagnosis, and you approve it bebefore any work starts.
| Repair Type | Typical Price Range |
|---|---|
| Gas Furnace Repair (including heat exchanger) | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
What drives a repair toward the $700 end is usually the part: a heat exchanger or a gas valve costs more than an ignitor or a flame sensor. Labor in Pompano Beach is comparable to the rest of Broward County, so affordability doesn’t mean we cut corners. We stock hard-to-find coastal components and give free estimates, so you’ll know the written number before you commit. Call (361) 306-9515 for a precise quote on your furnace.
We Also Serve Cities Near Pompano Beach
If you’re in Coconut Creek, Margate, Deerfield Beach, or Fort Lauderdale, our Furnace Repair team covers those communities too. The salt air issue shifts depending on how close you are to the ocean, but the standard stays the same: written price, on-time arrival, and a full-year guarantee. For homeowners here in Pompano Beach, our Furnace Repair in Pompano Beach page covers everything specific to this city and the coastal strip.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Pompano Beach
Living near the ocean in Pompano Beach means your furnace lives in a salt-spray environment all year, even when it’s not running. Salt crystals carried on the breeze settle on heat exchangers, burner assemblies, and electrical connections, and the humid air accelerates the corrosion into deep rust or pinhole leaks. Practically speaking, a furnace in Lighthouse Point or along A1A may need a heat exchanger replacement at year 10 where the same unit in Coral Springs would go 15 years. The repair list is longer: more rust-through, more gas valve corrosion, more cracked welds. That’s why we recommend coastal-specific maintenance and never treat a Pompano Beach furnace like an inland unit.
The most common furnace repairs in Pompano Beach are cracked heat exchangers, corroded gas valves, failed ignitors, and blower motors with rusted bearings. We also see a lot of dual-fuel systems with pinhole leaks in the outdoor condenser coil from salt exposure. The pattern is almost always the same: the unit sat idle through eight months of humid coastal air, then fired up on the first cool night and failed under the load. Call us at (361) 306-9515 and we’ll diagnose it same-day with a written price.
Yes, and for homes east of Federal Highway it’s close to a no-brainer. A coated condenser coil has a factory-applied corrosion barrier on the aluminum fins and copper tubing, which directly counters the salt-laden air that destroys unprotected coils in Pompano Beach within a few years. The upgrade costs more than a standard coil but far less than repeated refrigerant leak repairs and a burned-out compressor. We got a call in Lighthouse Point about a Carrier gas furnace that kept tripping its limit switch. When we pulled the burner compartment, the heat exchanger showed surface rust unusual for a 10-year-old unit. We replaced the heat exchanger and upgraded the outdoor condenser coil to a coated-coil model to resist the salt air. The homeowner said the system had never run this quietly. That’s the kind of fix that makes sense here.
Every six months, full stop. Coastal air doesn’t take a season off, and a furnace that sits for eight months in humid, salty air is accruing oxidation even while it’s idle. A twice-yearly schedule catches early rust on the burners, cleans the flame sensor, tests the gas valve, and confirms the heat exchanger hasn’t developed cracks. Our furnace tune-up runs $80 – $200, and the written report you get afterward tells you exactly what we found and what we’d watch next. It’s the cheapest insurance you can buy against a $700 heat exchanger repair or worse, a carbon monoxide leak.
Yes. Boiler repair in Pompano Beach runs $150 – $700, same range as gas furnace repair, and we service both in every Pompano Beach neighborhood from Palm Aire to Pompano Isles. Boilers are common in older condominium buildings along the beachside corridor, and their circulator pumps and zone valves take the same salt beating as furnace components. We diagnose, quote in writing, and complete most boiler repairs in one visit. Call (361) 306-9515 and tell us what the boiler is doing; we’ll tell you what it’s likely to cost before we even arrive.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Pompano Beach and South Florida. Dalton Heating & Air is a Garrison Partners company held to The Garrison Standard since 2003.







Before
After
Before
After
Before
After