Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Plantation
Most furnace repairs in Plantation run $150 to $700, and when you call Dalton Heating & Air, you get a written price before any work starts and a real person on the phone around the clock. We know Plantation’s housing stock block by block: the 1960s and 70s ranch homes off Broward Boulevard and the newer builds west near Sawgrass Mills each fail differently, and that changes what a repair should cost. Our crews arrive inside a stated window, in uniform, background-checked, and they do the job by the book. Call (361) 306-9515 and you will talk to a live person, not a voicemail queue.
If your heat is out on one of the few genuinely cold Plantation nights, this is a health and safety issue, not an inconvenience. We treat no-heat calls that way.
Key Takeaways
- Furnace repair in Plantation typically runs $150 – $700 depending on the part and the system.
- Every job includes a written price before work starts and a 365-day written guarantee on the repair.
- We service all nine major residential HVAC brands, including Rheem, York, Daikin, and Bryant.
- Live dispatch answers 24/7. No answer machine, no callback window.
- If the repair fails within a year, we return at no charge. That is The Garrison Standard, in force at every job since 2003.
Why Dalton Heating & Air Is Plantation’s Preferred Furnace Repair Company
Dalton Heating & Air is a Garrison Partners company, and we have held to The Garrison Code since 2003: arrive inside the stated window, put the price in writing before starting, do the work by the book, leave the site clean, and stand behind every repair for a full year. Plantation homeowners call us because they have been burned before by techs who quoted one number over the phone and another at the door. That does not happen here. The price we write is the price you pay.
Our lead technician for the Plantation area is Marco Benitez. He and the rest of the crew know which streets in Plantation run older air handlers and which ones have newer heat pumps, and they stock parts locally so we are not waiting on a warehouse run when your blower motor dies on a 50-degree morning. Dispatch is coordinated from our South FL office, but the techs who knock on your door serve Plantation directly. We answer calls live, 24 hours a day, every day.
We do not push replacement when a repair gets you another season or two. The reverse is also true: when a 35-year-old system off University Drive is leaking refrigerant and the heat exchanger is cracked, we will tell you straight that a new system is the honest call, and we will show you the numbers for both options side by side.
Heat Pump Repair in Plantation
Heat Pump Repair in Plantation is the most common heating call we run, because most of the city heats with electric heat pumps rather than gas furnaces. A heat pump does double duty; it cools in summer and reverses to heat in winter, and that reversing valve is a part we replace regularly on Plantation homes. When it sticks in cooling mode, the system still runs, but you are not getting heat. The aux electric strip kicks on and you start paying for it on your FPL bill.
Heat pump repair in Plantation falls within the same $150 – $700 range as furnace repair. A bad capacitor or thermostat calibration is on the lower end. A reversing valve or defrost control board runs higher. We test the capacitor, check refrigerant charge, and inspect the heat exchanger before quoting anything, so the first visit gives you the real picture, not a guess.
Reversing Valve and Aux Heat Strip Diagnosis
When a Plantation homeowner tells us the house is blowing cool air in heat mode, the reversing valve is the first thing we check. If it is stuck, the aux strip electric heat becomes the only heat source, and that is why the FPL bill spikes. We test the valve solenoid and the thermostat wiring to confirm the failure before replacing anything.
Thermostat Calibration and Short-Cycling
A heat pump that short-cycles in Plantation is often a thermostat calibration issue, not a compressor failure. We re-run the calibration after any repair, because a thermostat that reads 3 degrees off makes the system work against itself. That is a 15-minute fix that can save you hundreds on a part you did not need.
Heating Repair in Plantation
Heating Repair in Plantation covers the full lineup: gas furnaces, heat pumps, electric air handlers, and the aux heat strips that back them up. The job starts with a diagnostic that tells you exactly which part failed and what it costs to fix, written down before any work starts. Most heating repairs in Plantation land between $150 and $700, and the specific part is the difference between the low and high end.
The unusual thing about heating in South Florida is that the system sits idle for most of the year, then gets called on hard for a few cold stretches. Parts that worked fine all summer fail in January because they have been sitting. Capacitors dry out, blower motors seize, and reversing valves stick. We see it every winter in Plantation.
Blower Motor and Capacitor Work
Older air handlers in 1980s and 90s Plantation ranch homes lose blower motors and capacitors with age. The heat side cycles on, but the weak blower cannot move enough air to reach setpoint. We replace the motor or capacitor, check static pressure, and get the system moving air correctly again.
Ignitor and Gas Valve Service
A smaller share of Plantation homes run gas furnaces, but for those that do, the ignitor and gas valve are common failure points. A furnace that clicks but will not light is usually the ignitor. A furnace that lights and then drops out is often the gas valve. Both are repairable, and we carry the common parts for Rheem and York gas furnaces on the trucks.
Trusted Brands We Service in Plantation
Our techs are factory-trained on nine major residential HVAC brands, and we stock local parts for Plantation jobs so a repair does not stall on a supply-house order. That means faster turnaround on Rheem heat pumps off Pine Island Road, York air handlers in Plantation Acres, Daikin units in Jacaranda, and Bryant systems in the older ranch blocks. One crew, trained on all of it, so you do not get a tech who only knows one brand and blames the others.
Common Furnace Repair Problems We See in Plantation Homes
- Heat pump reversing valves stuck in cooling mode. The outside unit runs but the air coming from the vents is not warm. The aux electric strip kicks on and your FPL bill climbs before the thermostat ever shows “emergency heat.”
- Aging blower motors and weak capacitors on 1980s and 90s air handlers. The system runs, but rooms never reach setpoint. This is common in the older ranch stock around Plantation Isles and east of University Drive.
- Undersized aux heat strips paired with heat pumps sized for the original build. After a remodel adds square footage, the system short-cycles and cannot hold temperature on cold mornings. A load calculation tells you whether you need a bigger strip or a proper fix.
- Thermostat drift from stale calibrations. A thermostat reading a few degrees off makes the heat pump fight itself. Re-calibration is quick, cheap, and often the whole fix.
We ran a no-heat call on a 1970s ranch off Plantation Isles where the reversing valve had stuck and the aux strip was shouldering the entire load. The homeowner saw the FPL bill spike before the thermostat ever flagged the problem. Our tech tested the capacitor, checked the refrigerant charge, and confirmed the heat exchanger was still sound. We replaced the reversing valve and re-ran the thermostat calibration instead of selling a new system. That repair stayed in the $150 – $700 range instead of the $3,500 – $7,500 install range. That is the difference a real diagnostic makes.
Pricing for Furnace Repair in Plantation, FL
Here is what furnace and heat pump work actually costs in Plantation. These are the prices we bind to in writing before any work begins.
| Service | Price Range in Plantation |
|---|---|
| Furnace repair (diagnostic + repair) | $150 – $700 |
| Tune-up | $80 – $200 |
The spread depends on the part. A capacitor or ignitor is on the low end. A reversing valve, gas valve, or blower motor lands higher. Age of the system matters too: a 2005 Goodman in a Plantation ranch is cheaper to fix than a 2020 variable-speed Daikin in a newer west-side build, simply because the parts cost different money. You get the exact number in writing before we turn a wrench, and estimates are free. Call (361) 306-9515 and we will quote the job straight.
This page does something most HVAC sites do not: it gives you the repair-versus-replace math and real local price ranges for Plantation furnace and heat pump work, instead of generic “call us fast” copy that ignores how South Florida actually heats its homes.
We Also Serve Cities Near Plantation
Our crews cover Plantation plus the surrounding area: Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. The same written pricing, the same 365-day guarantee, and the same live answer on the phone. If you are a few minutes outside Plantation, call us. Dispatching from our South FL office puts us within close reach of every city on that list.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Plantation
A heat pump under about 12 years old with a clean heat exchanger is usually worth repairing. The repair-versus-replace line in Plantation is most often crossed by system age plus a major failure: a dead compressor, a cracked heat exchanger, or a refrigerant leak on an R-22 system. Our technicians give you the repair quote and the replacement quote side by side, in writing, so you make the call with real numbers instead of a sales pitch. Call (361) 306-9515 and we will run the diagnostic.
A spiking FPL bill in heat mode almost always means your heat pump is not actually heating and the electric aux strips are doing all the work. That is the most common cause we find in Plantation: a reversing valve stuck in cooling mode, with strip heat running behind it. Aux strips draw far more electricity than the heat pump alone. The fix is usually a reversing valve or thermostat calibration, not a new system, and the repair lands in the $150 – $700 range. Call us for a diagnostic before you pay for another month of strip heat.
A load calculation, called a Manual J, measures how much heating and cooling your specific Plantation home needs based on square footage, insulation, window area, and ceiling height. Skip it and you get a system sized for the original build, not the home you have now. That is why a heat pump that needs repair on one Plantation street can be a full replacement on the next: the existing tonnage was matched to the original build, not the current load. We include the load calculation on every replacement quote, and the report is yours to keep.
SEER2 only matters when you are installing a new system. It is an efficiency rating, not a repair part, and it has no bearing on a reversing valve, blower motor, capacitor, or ignitor. If you are repairing an existing furnace or heat pump in Plantation, the SEER2 spec does not change what the repair costs or how it performs. It only enters the conversation if you decide to replace the system, at which point we will show you exactly what the higher-efficiency units cost and what they save on your FPL bill.
On a no-heat call in Plantation, we aim to have a tech at your door the same day you call, and we dispatch around the clock. Live dispatch means you talk to a person immediately, they log your address and the failure you are describing, and a uniformed tech heads your way inside the stated window. Call (361) 306-9515, tell us what the system is doing, and we will tell you when we will be there.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Plantation under The Garrison Standard since 2003.