Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Napa
Furnace repair in Napa typically runs $150 to $700, and most calls are resolved in a single visit. If your furnace is blowing cold air, short-cycling, or making a sound it didn’t make last winter, call Dalton Heating & Air at (361) 306-9515 and we’ll have a background-checked, uniformed technician at your door inside a stated window. We don’t answer with a voicemail queue. A real person picks up, 24 hours a day, and dispatches a local crew that knows Napa’s housing stock and how our mild winter nights still find every weak point in a furnace.
Why Dalton Heating & Air Is Napa’s Preferred Furnace Repair Company
Napa homeowners call us for the same reason they call the same plumber twice: the work holds up and the price on the invoice matches the price on the quote. Dalton Heating & Air operates under The Garrison Standard, which has been in place since 2003. That means every repair gets a written price before any work starts, a written guarantee covering the repair for a full year, and a free return visit if the fix fails inside that window. No exceptions, no “premium warranty” upsell.
We are not the cheapest shop in Napa, and we don’t try to be. We’re the shop that shows up inside the window, explains what’s wrong in plain English, and leaves the furnace room cleaner than we found it. The Garrison Code requires it: arrive on time, put the price in writing, do the job by the book, leave the site clean, and stand behind the work for 365 days. Marco Benitez runs our team to that standard on every call, whether it’s a bad ignitor in a 1990s Lennox or a blower motor failure in a newer Trane.
Our techs are factory-trained to service nine residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters in Napa because the housing stock spans everything from 1950s ranch homes near Vintage High School to newer builds up in the hills off Dry Creek Road, and each era has its own furnace quirks.
Heat Pump Repair in Napa
Heat pump repair in Napa usually falls in the $150 to $650 range, and it’s a service we handle more often than people expect. Many Napa homes, especially those built in the last 15 years and those without natural gas service on the east side, use heat pumps as their primary heating source. When a heat pump stops heating, the failure is often in the reversing valve, the defrost control board, or a refrigerant leak that also weakens cooling performance in summer.
A heat pump that runs constantly in Napa’s mild winter is not necessarily broken. It may be doing exactly what a heat pump does: running long, low cycles. But if it’s running and the air coming out feels lukewarm, or if the outdoor unit is iced over in 50-degree weather, that’s a repair call, not a setting issue.
Reversing Valve and Defrost Issues
The reversing valve is what lets a heat pump switch between heating and cooling. When it sticks, the unit cools when you want heat or heats when you want cooling. We test the valve, the solenoid, and the defrost sensor before touching anything else. Napa’s cool, damp winter mornings stress defrost controls, and a failed defrost cycle will freeze the outdoor coil even when temperatures never dip below 40.
Refrigerant Leaks in Heat Pump Systems
Refrigerant recharge, or topping off the fluid your system uses to transfer heat, is one of the most common heat pump repairs we perform in Napa. A slow leak will drop efficiency long before it kills the system outright. We find the leak, repair it, and recharge to manufacturer spec. We don’t just gas it up and leave, because a leak that’s ignored in January becomes a no-cooling emergency in August.
Heating Repair in Napa
Heating repair in Napa covers everything from gas furnaces to heat pumps to occasional hydronic systems, and the range is $150 to $650 for most jobs. When a Napa furnace quits, it’s rarely convenient. The average January low in Napa sits around 39 degrees, which is mild by national standards but cold enough to make a dead furnace a genuine health risk for older residents and anyone with respiratory issues. We treat no-heat calls as emergencies, 24/7, with no overtime charge.
What drives the price on a heating repair is almost always the part. A flame sensor replacement is quick and inexpensive. A gas valve or a blower motor is more involved. A cracked heat exchanger is a different conversation entirely, because it’s a carbon monoxide risk, not just a comfort problem.
Ignitor and Flame Sensor Work
Electronic ignitors wear out. In Napa, where furnaces run long low cycles across a mild-but-long season, ignitors and flame sensors accumulate more cycles than they would in a colder climate with shorter, harder runs. A furnace that clicks but won’t light is usually an ignitor. A furnace that lights and then shuts down after a few seconds is usually a flame sensor. Both are common, and both are usually under $350.
Gas Valve and Blower Motor Repairs
A gas valve that won’t open means no heat at all, and it’s a repair we take seriously because it involves the gas line. We never tell a homeowner to “do it yourself” on anything touching gas. The job requires a trained professional, and it always gets a written quote before we unbolt anything. Blower motor failures often announce themselves with a hum, a rattle, or weak airflow from the registers, and Napa’s dusty summer-vineyard air means filters load up faster here than in coastal towns.
Trusted Brands We Service in Napa
We service and stock parts for the brands Napa homes actually have. That includes Trane, Lennox, Goodman, and Rheem, alongside Carrier, York, Daikin, Bryant, and American Standard. Because Napa is a drive from major parts warehouses in the East Bay, we keep common ignitors, flame sensors, capacitors, and blower motors on our trucks so a typical repair doesn’t require a second visit for parts. If your furnace is a brand we don’t stock, we’ll tell you upfront before we schedule the call, not after we’ve opened the cabinet.
Common Furnace Repair Problems We See in Napa Homes
- Short-cycling and lukewarm supply air from a weak blower motor capacitor. Napa’s long, mild heating season means furnaces run for hours in low stages, and capacitors lose their charge over time. A weak capacitor makes the blower spin too slowly, the furnace overheats, and the limit switch cuts the burner before the house gets warm.
- Heat exchanger cracks in older Carrier and Lennox units. Napa winters rarely push a furnace hard enough to trigger carbon monoxide symptoms, so a crack can go unnoticed for years. We combustion-test every furnace we open in Napa, because a visual check is not enough to rule out a crack in an aging heat exchanger.
- Undersized or oversized furnaces from previous contractors who guessed. Some companies quote a replacement based on square footage alone. That’s how Napa homes end up with a 100,000-BTU furnace in a 1,400-square-foot house, short-cycling itself to death in three years. A room-by-room load calculation prevents this, and we do one on every replacement.
- Fouled flame sensors in homes near vineyards and open space. Napa’s air carries agricultural dust and pollen through much of the year. That fine particulate settles on the flame sensor, and suddenly the furnace lights and shuts off repeatedly. Cleaning or replacing the sensor is one of the most common and least expensive repairs we perform.
Pricing for Furnace Repair in Napa, CA
Here’s what furnace repair in Napa actually costs, in writing, before any work starts.
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heating Repair | $150 – $650 |
| Heat Pump Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
The final number depends on the part and the labor it takes to reach it. A flame sensor replacement in a furnace with easy cabinet access sits near the bottom of that range. A gas valve replacement in a tight attic or crawlspace sits near the top. Before we touch a screw, you get a written quote with the exact price. If the repair fails within a year, we return at no charge. That’s not a promotion. It’s The Garrison Standard.
We Also Serve Cities Near Napa
Our heating and cooling teams cover the Napa Valley and the surrounding foothills, including Furnace Repair in Napa and the nearby communities of Deer Park, Boyes Hot Springs, Sonoma, and Winters. If you’re outside the city but still within reasonable driving distance of the valley, call us and we’ll tell you straight whether we can get a truck to you.
Serving Napa, CA - Our Local Coverage Area
We’re based in the Napa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Napa
The answer depends on the heat exchanger, not the thermostat. A furnace that short-cycles in Napa usually has a weak blower capacitor, a clogged filter, or an oversized unit from a bad previous install. The first two are repairs, typically $150 to $450. If a combustion test finds a cracked heat exchanger, replacement is the only responsible option, because carbon monoxide doesn’t care that Napa’s winters are mild. We ran exactly this diagnostic on a customer’s Carrier furnace in the Alta Heights neighborhood off Coombs Street. The tech found a weak capacitor and a heat exchanger crack a visual inspection would have missed. We showed them both numbers, ran a load calculation on their 1,400-square-foot home, and they chose a properly sized unit instead of another guess. Call (361) 306-9515 and we’ll walk you through the same decision for your furnace.
Most furnace repairs in Napa fall between $150 and $700. A flame sensor cleaning or ignitor replacement sits near $150 to $300. A blower motor or gas valve runs $350 to $700. You should get the exact price in writing before any work begins, and the repair should be covered by a written guarantee. Ours runs a full year, and a failed repair gets a free return visit.
Yes, because Napa’s mild-winter climate makes oversizing a quiet problem that gets expensive. Nights in the high 30s and low 40s are cold enough to stress a furnace but not cold enough to hide a failing heat exchanger behind constant run time. A contractor who guesses based on square footage usually oversizes, and an oversized furnace short-cycles, wears out early, and leaves rooms unevenly heated. A room-by-room load calculation keeps the unit right-sized for your actual heat loss. We do one on every replacement, no exceptions.
SEER2 is the current efficiency rating for cooling, and it matters for your heating bill if you have a heat pump, because a heat pump’s efficiency rating applies to both heating and cooling modes. A higher SEER2 rating means the system moves more heat per dollar of electricity. In Napa’s long heating season, a jump from a 15-SEER2 to an 18-SEER2 heat pump can cut the electric portion of your winter bill by a meaningful margin. We can show you the math on your own usage before you commit to anything.
Yes, and no. Heat pump repair in Napa runs $150 to $650, the same range as furnace repair. The difference is in the parts: heat pumps fail most often at the reversing valve, the defrost board, or a refrigerant leak, while furnaces fail at the ignitor, flame sensor, gas valve, or blower motor. If your home heats with a heat pump and you’re not sure whether the problem is mechanical or electrical, call (361) 306-9515 and describe the symptoms. We’ll tell you what’s likely before we even schedule the truck.
If your furnace or heat pump is acting up in Napa, call Dalton Heating & Air at (361) 306-9515. A real person answers, the price is in writing before we start, and the repair is guaranteed for a full year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Napa since 2003.