Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Manhattan
Furnace repair in Manhattan typically costs between $150 and $700, depending on the part that failed. Most no-heat calls we run in Manhattan are diagnosed same-day, and the price is in writing before we touch a single component. If your heat is out on the Upper West Side, in Murray Hill, or down in Battery Park City, call (361) 306-9515 and a live person answers, 24/7.
Manhattan is not an easy place to run HVAC calls. Prewar buildings, landmark restrictions, doorman protocols, Con Edison gas access: these details change the job. Our Furnace Repair team knows the borough’s building stock, which means we show up with the right diagnosis plan instead of learning on your dime.
Why Dalton Heating & Air Is Manhattan’s Preferred Furnace Repair Company
Dalton Heating & Air operates under The Garrison Standard, a set of non-negotiable terms in place since 2003. Every repair includes a written price before work starts, a written one-year guarantee on the repair itself, and a free return visit if the repair fails within that year. That is not an upgrade package. It is the baseline.
Manhattan homeowners deal with a specific kind of frustration: technicians who cannot find parking, arrive late, quote one number over the phone, then present a different number at the door. Our crews are background-checked, uniformed, and dispatch is coordinated from the New York City office so response windows hold. When we say a tech will arrive between 9 and 11, that is the window.
Marco Benitez leads the team. He has built the operation around a plain rule: confirm the equipment before quoting. In Manhattan, that one step prevents half the wasted trips and wrong-part orders that plague furnace repair in this borough.
Gas Furnace Repair in Manhattan
Gas furnace repair in Manhattan means working around steam-heated prewar buildings, shared flues, and Con Edison’s below-grade gas service. Many calls we get in Manhattan start as “my furnace is broken” and turn out to be a gas-fired boiler or a PTAC heat section, not a furnace at all. Our techs confirm the actual appliance before quoting anything. A repair company from outside the borough will often diagnose the wrong machine and price the wrong job.
Most gas furnace repairs in Manhattan run $150 – $700. A failed ignitor or flame sensor sits at the low end. A blower motor replacement, a gas valve, or a heat exchanger issue pushes toward the high end. You will see the written price before any parts go in.
No-Heat Diagnosis
A no-heat call in Manhattan starts with the actual equipment, not the thermostat. We check the gas supply path, the ignitor, the flame sensor, and the limit switch in a deliberate order. If Con Edison valve access is required, we tell you at the first visit, not after three hours of waiting.
Gas Valve and Safety Checks
Failed gas valves are common in older Manhattan buildings where pressure to individual units fluctuates. We replace the valve, test combustion, and confirm the unit shuts down cleanly. A furnace that keeps running after the thermostat clicks off is a safety issue, and we treat it as one.
Furnace Tune Up in Manhattan
A furnace tune up in Manhattan is a flat $80 – $200, and it should happen every fall before the heating season really kicks in. Buildings here run heat from October through May, and a furnace that has been idle all summer will collect dust, rust, and the occasional mouse nest, especially in older buildings near Riverside Park or along the avenues.
Our tune up is a 20-point check: burner condition, flame sensor, ignitor, gas pressure, heat exchanger inspection, blower amperage draw, static pressure, and the condensate drain if the unit is high-efficiency. You get a written report of what was found and what is wearing out. Our techs are not paid on what they sell, so the report is a repair list, not a sales pitch.
Heat Exchanger Inspection
In Manhattan, prewar buildings with shared or undersized flues put extra stress on heat exchangers. A cracked exchanger can leak carbon monoxide. We inspect every exchanger on every tune up and tell you plainly if it is failing. This is the single most important check we do.
Blower Motor and Static Pressure
High static pressure kills blower motors early, and Manhattan apartment-sized furnace closets often force tight, restrictive return ductwork. We measure it on every tune up and correct what we can. It is the difference between a blower that lasts six years and one that lasts twelve.
Trusted Brands We Service in Manhattan
Dalton Heating & Air technicians are factory-trained to service nine major HVAC brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Manhattan customers with Goodman, Rheem, or York furnaces, we keep common parts stocked at the local dispatch level, which means less waiting on a no-heat day. If your unit is a Daikin high-efficiency model with a complex fault code, our techs have the diagnostic software to read it correctly the first time, not after three guess-and-replace rounds.
Common Furnace Repair Problems We See in Manhattan Homes
- High-limit trips from flue and static pressure problems. Prewar buildings with shared or undersized flues cause nuisance high-limit trips and heat exchanger stress. This gets misdiagnosed as a thermostat calibration issue or a failed gas valve all the time.
- Steam and hot-water systems masquerading as furnace failures. Many Manhattan apartments are heated by boilers, not furnaces. A generic HVAC tech will troubleshoot the wrong appliance and hand you a quote for equipment that is not even in your unit.
- Con Edison gas service delays on below-grade meters. A simple capacitor or flame sensor fix can turn into a multi-visit job if the gas valve is in a sealed Con Edison enclosure. We plan for this and tell you what to expect.
- Collapsed return flex duct in tight furnace closets. Manhattan furnace closets are small. Return ducts get crushed behind stored items, raising static pressure and tripping the high-limit. We find it, fix it, and heat returns the same day.
Pricing for Furnace Repair in Manhattan, NY
Here are the honest numbers for Manhattan:
| Service | Typical Cost in Manhattan |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
A flame sensor or ignitor replacement sits around $150 – $300. A blower motor runs $350 – $700. A gas valve lands mid-range. Heat exchanger work is at the top end and sometimes justifies replacement instead. The price is in writing before any work starts, on every job, no exception. Call (361) 306-9515 for a free estimate, and we will tell you the range over the phone.
On a February no-heat call in a prewar co-op on West 72nd Street, our tech found a Carrier gas furnace with a failed induced-draft blower motor and a tripped high-limit, caused by a dirty heat exchanger and high static pressure from a collapsed return flex duct. We replaced the blower motor, cleaned the exchanger, corrected the duct, and restored heat the same visit. That is the standard, not the exception.
We Also Serve Cities Near Manhattan
Dalton Heating & Air serves Manhattan and the boroughs and suburbs around it. If you are in Brooklyn, Staten Island, the Bronx, or Mount Vernon, our Manhattan dispatch coordinates crews across the region. Same written pricing, same one-year repair guarantee.
Serving Manhattan, NY - Our Local Coverage Area
We’re based in the Manhattan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Manhattan
If your unit has its own furnace or PTAC heat section, the problem is likely in your equipment, and we can fix that. If the building provides steam or hot-water heat to all units, the issue is in the building’s boiler or zone controls, which your building management must address. We can inspect your unit and tell you which situation you are in, usually within one visit. Call (361) 306-9515 to schedule.
The rule we use: if the repair cost is under half of a new unit’s installed price and the furnace is under 15 years old, repair is usually the right call. If the heat exchanger is cracked, or the unit is over 18 years old with multiple failing parts, replacement starts making sense. We give you both options with written numbers and let you decide. No pressure, no commission-driven techs.
SEER2 is the updated efficiency standard for heat pump cooling, and it matters for furnaces that run with a heat pump. A higher SEER2 number means less electricity used per unit of cooling. For heating specifically, look at the AFUE rating: a 95% AFUE furnace converts 95% of the gas it burns into heat. In Manhattan’s expensive energy market, the difference between an 80% AFUE and a 95% AFUE unit shows on every Con Edison bill. We can run the numbers for your unit size and fuel type.
A high-limit trip means the furnace is overheating, usually because airflow is restricted or the flue is undersized. In Manhattan prewar buildings, shared or undersized flues are a leading cause, along with collapsed return ducts in cramped furnace closets. It is not a thermostat calibration problem, and it is not fixed by setting the temperature lower. Call (361) 306-9515 and we will find the actual restriction.
For no-heat emergencies, we prioritize Manhattan calls and typically arrive within hours, not days. A real person answers the phone 24/7, and dispatch from the New York City office means we can route a tech who is already in the borough. Same-day service is normal for furnace failures between October and April. Call (361) 306-9515 the moment you notice the heat is out.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Manhattan, NY.