Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Loomis
Most furnace repairs in Loomis run $150 – $700, and our technicians can typically reach homes in the Loomis Basin, along Taylor Road, and out toward Penryn within the same day you call. We carry common Trane, Lennox, Goodman, and Rheem parts on our trucks, so a no-heat call often turns into a finished repair in one visit. If your furnace is short-cycling, blowing cold air, or making a sound you can’t place, call (361) 306-9515 and a live person answers, day or night.
Our Furnace Repair crew knows Loomis’s housing stock well: older ranch homes off Horseshoe Bar Road, newer builds near Sierra College Boulevard, and plenty of units with equipment sized decades ago. Winter nights here drop into the 30s, and dry air exposes problems a furnace in a coastal climate could hide for years. That is exactly the repair environment we train for.
Why Dalton Heating & Air Is Loomis’s Preferred Furnace Repair Company
Dalton Heating & Air operates under The Garrison Standard, which has governed our work since 2003. What that means in plain terms for a Loomis homeowner: the price goes in writing before any work starts, the repair carries a written guarantee for a full year, and if the repair fails in that window, we return at no charge. Those are not options. They are the standard every crew follows on every call, from a blower motor replacement off King Road to a gas valve repair in the Granite Bay-adjacent stretches of Loomis.
Marco Benitez leads our team, and every technician who rolls out to Loomis is background-checked, uniformed, and factory-trained on nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. You will know who is coming before they arrive, and they will arrive inside the stated window. When a Loomis customer calls with a no-heat situation at 6 a.m. on a 34-degree morning, the phone is answered by a live person, not a callback queue.
We have earned a strong local reputation across Loomis by doing what we say we will. The Garrison Code is straightforward: arrive inside the window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. Loomis homeowners who have been burned by no-shows or door-price changes tend to stay with us once they see how that code actually operates.
Heating Repair in Loomis
Heating repair in Loomis usually starts with a no-heat call or a furnace that runs constantly without reaching the thermostat set point. The most common fixes we perform are ignitor replacements, flame sensor cleanings, gas valve repairs, and blower motor replacements, with most jobs landing between $150 and $700 depending on the part and the furnace model. A no-heat repair on a cold Loomis morning is urgent work, and we treat it that way.
Ignitor and Flame Sensor Work
When a furnace clicks but the burners never fire, the ignitor is the first suspect. Loomis’s dry winter air pushes dust through systems faster than humid climates do, and a fouled flame sensor or a cracked ignitor shuts the whole unit down. We stock common ignitors for Carrier, Trane, Lennox, and Goodman units on our trucks, so this repair often finishes same day.
Blower Motor and Airflow Repairs
A furnace that trips its high-limit switch repeatedly is usually an airflow problem, not a thermostat problem. In Loomis, dirty filters and undersized ductwork in older ranch homes drive static pressure up until the blower motor overheats and the system shuts down. We diagnose the airflow issue before swapping parts, so you are not paying for a motor replacement that will fail again in six months.
Boiler Repair in Loomis
Boiler repair in Loomis is less common than furnace work, but plenty of older homes here still run hydronic systems, especially properties built before forced-air became standard in Placer County. Boiler repairs typically run $150 – $700 as well, with common issues being pressure valve failures, circulator pump problems, and expansion tank failures. If your radiators are cold at the bottom and hot at the top, or the system is knocking, that is a boiler problem, not a furnace problem, and we work on both.
Circulator Pumps and Pressure Issues
A boiler that heats unevenly across zones usually has a failing circulator pump or a waterlogged expansion tank. Loomis homes that sit on well water, which is common south of town toward Granite Bay, can see sediment buildup in boiler lines that accelerates pump wear. We test system pressure and flow before ordering parts, so the repair addresses the cause rather than just the symptom.
Heat Exchanger and Burner Repairs
Boiler heat exchangers in Loomis see the same dry-winter stress that furnace exchangers do, though the failure mode is different: repeated heating and cooling cycles with low water flow can create hot spots that crack cast-iron sections. We inspect the exchanger on every boiler repair call. If it is compromised, we will tell you plainly and walk through repair-versus-replace numbers with you.
Trusted Brands We Service in Loomis
Our technicians are factory-trained on Trane, Lennox, Goodman, and Rheem equipment, among five other major brands, and we keep common repair parts stocked locally for Loomis customers. That means less waiting on a warehouse shipment when your furnace is down on a 33-degree night. Whether your system is a 20-year-old Rheem or a newer Trane, we service it by the book and guarantee the repair in writing for a full year.
Common Furnace Repair Problems We See in Loomis Homes
- Short-cycling from oversized equipment. Many older Loomis ranch homes got furnaces sized by square footage alone, so the units heat the house too fast, shut off, and fire again minutes later. That constant cycling stresses heat exchangers and blower motors until one of them fails.
- Cracked heat exchangers from dry winter air. Loomis winters are dry, and dry air means less thermal mass in the combustion chamber. Heat exchangers expand and contract more aggressively than they do in humid climates, and cracks show up faster. This is a safety issue, not just a comfort issue.
- High-limit trips from dirty filters and duct leaks. A furnace that runs for a few minutes then shuts off is often suffocating from airflow. Duct leaks in unconditioned Loomis attics compound the problem, bleeding heat into the attic so the furnace runs longer than it should.
- Ignitor failures on cold starts. The first cold snap of the season is when ignitors fail. A silicon nitride ignitor that worked fine in March cracks under the repeated heating and cooling of a Loomis winter, and suddenly the furnace will not fire.
Pricing for Furnace Repair in Loomis, CA
Furnace repair in Loomis runs $150 – $700 for most jobs. A flame sensor cleaning or ignitor replacement typically sits at the lower end, while a blower motor replacement or gas valve repair lands higher. We give you the exact price in writing before any work begins, so there is no door-price negotiation. Here is how Loomis pricing breaks down across our services:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
| AC Repair | $150 – $650 |
| AC Installation | $3500 – $7500 |
Every repair includes our written one-year guarantee and a free return visit if the fix does not hold. Call (361) 306-9515 for an exact quote on your furnace, and we will put the number in writing before any work begins.
We Also Serve Cities Near Loomis
Our crews handle furnace repair in Loomis and the surrounding area, including Rocklin, Granite Bay, Newcastle, and Roseville. If you are on the edge of Loomis and one of those communities, call us and we will confirm which crew can reach you fastest. Dispatch for the region is coordinated from our Sacramento office, and a live person answers around the clock.
Serving Loomis, CA - Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Loomis
If your furnace is under 12 years old and the repair is under $700, repairing almost always makes sense. If the heat exchanger is cracked or the unit is 15-plus years old and the repair quote approaches half the cost of a new system, we will walk you through replacement numbers honestly, including a proper load calculation, so you are comparing real options rather than guessing. In the Loomis Basin off Taylor Road, we diagnosed a 2004 Carrier furnace that was short-cycling and tripping the high-limit switch. A heat exchanger inspection found a cracked cell from years of oversized, dry cycling, so we walked the homeowner through repair-versus-replace math, then installed a properly sized Trane unit after running a full load calculation. The new system also fixed their static pressure, which had been robbing airflow for a decade. Call (361) 306-9515 if you want that same straight answer for your unit.
Short-cycling in Loomis is almost always caused by an oversized furnace or an airflow restriction. Older Loomis ranch homes frequently have furnaces sized by square footage rather than a room-by-room load calculation, which means the unit heats the space too quickly and shuts off before completing a full cycle. Dry winter air plus a dirty filter drives static pressure up, tripping the high-limit switch and causing no-heat calls that look like thermostat failures but are airflow problems. We diagnose both causes before recommending any repair.
Most furnace repairs in Loomis cost between $150 and $700. Simple fixes like ignitor replacements and flame sensor cleanings sit at the low end, while blower motor replacements and gas valve repairs run higher. The price is set in writing before any work starts, and the repair carries a one-year written guarantee. Call (361) 306-9515 for a free estimate on your specific furnace.
SEER2 is the updated efficiency rating standard for cooling equipment, and it matters in Loomis because our summers push air conditioners hard even though winters are when furnaces work most. If you are pairing a furnace replacement with an AC upgrade, choosing a higher SEER2 unit means lower summer cooling bills and better rebate eligibility. We will show you what different efficiency levels mean in actual dollars on your Loomis utility bill, not just as a spec-sheet number, before you sign anything.
Yes, we repair boilers in Loomis. While forced-air furnaces are more common here, plenty of older Loomis homes still run hydronic systems, and we handle circulator pump failures, pressure valve issues, expansion tank problems, and heat exchanger inspections on boilers the same way we do on furnaces, with written pricing and a one-year guarantee. Call (361) 306-9515 if your radiators are knocking or not heating evenly.
Contact Dalton Heating & Air for furnace repair in Loomis, CA. Call (361) 306-9515 today for a free estimate. A live person answers 24/7, and we will put your price in writing before any work begins.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Loomis and the surrounding area.