Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Highland Village
Furnace repair in Highland Village typically runs $150 – $700 depending on the failed part, and most repairs are completed the same day we diagnose the issue. If your heater is blowing cool air, short-cycling, or making noise it shouldn’t make, call Dalton Heating & Air at (361) 306-9515. We serve all of Highland Village, from the two-story brick neighborhoods east of Briarhill Boulevard down to the streets off Highland Village Road, with technicians who know what these homes throw at a furnace.
Highland Village sits on the south side of Lewisville Lake, and the winter wind coming across that water changes what your heating system has to overcome. We account for that when we diagnose. A furnace sized for a home in Corinth or Hickory Creek won’t necessarily hold up the same way on your side of the lake, and we’ve spent enough time in Highland Village attics and crawl spaces to know exactly what that means for your repair bill.
Why Dalton Heating & Air Is Highland Village’s Preferred Furnace Repair Company
We are part of Garrison Partners, in operation since 2003, and every location works under The Garrison Standard. That means a written price before any work starts, background-checked uniformed technicians, and a written guarantee on every repair. Marco Benitez leads the team, and the standard he holds is simple: arrive within the window, do the job by the book, leave the site clean, and stand behind the work for a full year.
Our Furnace Repair techs get to Highland Village fast. Calls are answered by a live person 24/7, not a voicemail queue, and when a no-heat call comes in from a Highland Village address on a cold morning, we treat it like what it is: a priority, not a callback for tomorrow afternoon.
Homeowners in Highland Village have spent decades dealing with crews that no-show, quote one number over the phone and another at the door, or patch a symptom and leave the root cause for the next guy. That’s the exact problem The Garrison Code exists to solve, and it’s why a repair from Dalton comes with a 365-Day Done Right Promise: if it’s not right, we make it right, and if the repair fails within the year, we come back at no charge.
Heating Repair in Highland Village
Heating repair in Highland Village usually means one of two things: a furnace that won’t fire at all, or one that fires but can’t keep the house warm. The first is typically an ignition or gas valve problem. The second is more common in the 1980s – 2000s two-story brick homes that dominate the east side of Highland Village, where original single-stage furnaces and undersized returns have been fighting each other for two decades. Most repairs land between $150 and $700, depending on whether it’s a flame sensor, a blower motor, or something deeper inside the heat exchanger.
What a heating repair visit covers
When a Dalton tech arrives at your Highland Village home, they check the full ignition sequence, the blower, the capacitor, and the heat exchanger before quoting anything. That’s the difference between replacing a $40 flame sensor and discovering a cracked heat exchanger that’s been quietly leaking combustion air into your home. We don’t guess. We test.
When to call instead of waiting it out
If your furnace runs but the air at the register is lukewarm, don’t wait for the next cold front. Short-cycling, a yellow flame instead of blue, or soot around the burner are signals the system is working harder than it should be, and in Highland Village’s lake-wind conditions, a system running at partial output fails completely on the coldest night of the year. That’s the phone call we’d rather you make on a Tuesday afternoon than at 2 a.m.
Boiler Repair in Highland Village
Boiler repair in Highland Village is less common than furnace repair, but the homes that have boilers tend to be older, well-built, and worth the extra care. A boiler that’s knocking, leaking, or failing to reach set temperature needs a tech who understands hydronic systems, not someone who learned on forced-air and hopes for the best. Repairs on a Highland Village boiler typically fall in the $150 – $700 range, depending on the circulator pump, zone valve, or expansion tank involved.
Signs your boiler needs attention
Banging or gurgling noises usually point to air in the lines or a failing circulator. Low pressure, rust-colored water at the bleed valve, or a pilot that won’t stay lit are the other common culprits we see in Highland Village’s older mechanical rooms. None of these fix themselves, and most get cheaper to repair the sooner they’re caught.
Boiler safety and what we check
Boilers operate under pressure and produce carbon monoxide, so this is not a DIY job. A bad gas valve or a blocked flue can hurt someone. Our techs check the pressure relief valve, the flue condition, and the combustion reading on every boiler call, and we quote the repair in writing before touching a wrench.
Trusted Brands We Service in Highland Village
We’re factory-trained to service nine major HVAC brands, and in Highland Village we work on a lot of Goodman, Rheem, York, and Daikin equipment. Highland Village’s housing stock spans decades, so we stock common ignition parts, flame sensors, capacitors, and blower motors locally and can get less common parts the same day. If you’ve got a Daikin furnace that’s been faithful since the Bush administration or a Goodman that’s on its third ignitor, our techs know the quirks of each. We don’t send someone out to learn on your equipment.
Common Furnace Repair Problems We See in Highland Village Homes
- Cracked heat exchangers in aging single-stage furnaces. The original furnaces in older two-story brick homes off Briarhill Boulevard and Highland Village Road are at the end of their design life. A crack lets combustion gases into the airstream, and that’s a health issue, not just a comfort one. This is the repair-or-replace conversation we have most often in Highland Village.
- Failed blower motors and weak capacitors from high static pressure. Undersized returns in older ductwork force the blower to work against resistance its whole life. The motor fails early, and if you only replace the motor without addressing the airflow, you’ll replace it again in a few years.
- Ignition and flame sensor faults during lake-area cold snaps. The wind exposure on Highland Village’s south-lake side means furnaces cycle more during a hard freeze. Dirty or worn flame sensors make themselves known right when you need consistent heat most, and ignitors crack under the extra cycling.
- Thermostat calibration drift in two-story layouts. A thermostat that reads two degrees off can cause short cycling or uneven heat between floors. In a two-story brick home on the east side, the upstairs and downstairs often need different attention, and a miscalibrated thermostat hides the real problem.
Pricing for Furnace Repair in Highland Village, TX
Here’s what furnace repair costs in Highland Village, straight up. No vague “it depends” without a number attached. The range is $150 – $700 for most repairs, and the spread comes down to the part, the brand, and the age of the system.
| Service | Typical Price Range in Highland Village |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
A flame sensor or ignitor replacement sits at the low end. A blower motor or gas valve lands mid-range. A heat exchanger or control board pushes toward the top. The written estimate you get before any work starts has the exact number, and it doesn’t change at the door. Estimates are free, and the phone is answered by a real person at (361) 306-9515.
One more thing on pricing in Highland Village: the age of your ductwork matters more than a lot of companies will tell you. A $200 repair on a furnace connected to undersized returns might hold for a season, but if the blower is already burning out because of high static pressure, that $200 repair turns into a $500 blower motor in eighteen months. We’ll tell you that before you spend the money, not after.
We Also Serve Cities Near Highland Village
Dalton Heating & Air handles furnace repair throughout the metro, including Houston, San Antonio, Dallas, and Fort Worth. If you own a rental property near the lake or have family just across the bridge, the same written pricing and 365-Day Done Right Promise applies. Call (361) 306-9515 and a live person answers, whatever city you’re calling from.
Serving Highland Village, TX - Our Local Coverage Area
We’re based in the Highland Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Highland Village
It could be either, which is exactly why you test before you replace. A furnace blowing cool air and cycling every few minutes often points to a dirty flame sensor, a weak capacitor, or a thermostat that’s drifted off calibration – all under $300 to fix. But in Highland Village’s older two-story brick homes, short cycling can also be the early sign of a cracked heat exchanger, especially in original single-stage furnaces. Our techs check the heat exchanger on every diagnostic call, and you get a written quote before any work starts. Call (361) 306-9515 for a free estimate and a straight answer.
Most furnace repairs in Highland Village run $150 – $700, with the typical job landing in the $250 – $400 range. Ignitors and flame sensors are at the low end, blower motors and gas valves in the middle, and heat exchangers at the top. You’ll get a written price before the repair begins, and that number doesn’t change. Call (361) 306-9515 and the tech gives you the exact quote on site.
Highland Village sits on the south side of Lewisville Lake, which means winter wind exposure differs from neighborhoods just north of the water. A furnace sized by rule of thumb instead of a real heat loss calculation will short-cycle, overheat, or leave the upstairs cold in a two-story brick home. We run a Manual J load calculation on every replacement quote so the new furnace matches what your Highland Village house actually loses, not what a generic chart says a house like it might lose. Call (361) 306-9515 for a replacement quote built on real numbers.
Boiler repair in Highland Village is usually possible, and most repairs run $150 – $700. Circulator pumps, zone valves, expansion tanks, and pressure switches are all repairable parts. If the heat exchanger inside the boiler is cracked or the unit is leaking from the casting itself, replacement becomes the honest recommendation. We’re trained on hydronic systems and we’ll tell you which one you’re facing, with a written price either way. Call (361) 306-9515 for a diagnostic visit.
SEER2 is the updated efficiency rating standard for HVAC equipment, applied to heat pumps and air conditioners, and it measures cooling output relative to energy used. For a Highland Village furnace, the number that matters more on your winter gas bill is AFUE, which tells you what percentage of the fuel becomes usable heat. A newer furnace with a higher AFUE and a properly matched coil will move more of what you pay for into the house, especially in homes where the original equipment was sized before the lake wind exposure was accounted for. We’ll show you the real math on your bill before you decide. Call (361) 306-9515 for a consultation.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Highland Village since 2003.