Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Decatur
Furnace repair in Decatur, GA typically runs $150 – $700 depending on the part and the furnace, and a no-heat call is usually something we can diagnose the same day. If your furnace is blowing cool air, short-cycling, or refusing to light anywhere from Oakhurst to Winnona Park, we’ll send a background-checked technician who arrives inside the stated window and puts the price in writing before touching a single component. Dalton Heating & Air has been bound to The Garrison Standard since 2003: written pricing, on-time arrival, and a full-year written guarantee on every repair. Call (361) 306-9515 any hour and a real person answers, not a voicemail queue.
Why Dalton Heating & Air Is Decatur’s Preferred Furnace Repair Company
Decatur homeowners tend to ask sharper questions than most, and we’d rather earn the work with specifics than vague promises. Every furnace repair includes a written price before any work starts and a written guarantee that covers the repair for a full year under our 365-Day Done Right Promise. If the fix doesn’t hold, we return at no charge, period. That’s the Garrison Code, not a sales pitch.
Our techs work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment, so the furnace in your Decatur basement or attic closet is one we’ve already seen that week. Dispatch for Decatur runs through our Atlanta office, and we keep common parts stocked locally so a capacitor or ignitor doesn’t turn a one-hour repair into a three-day wait. You’ll know who’s coming before they knock: uniformed, background-checked, and carrying a written estimate pad, not a vague verbal quote.
Heat Pump Repair in Decatur
Heat Pump Repair in Decatur means working on a system that carries both your heating and cooling load, which matters here because Decatur’s damp, mild winters punish a heat pump that’s even slightly out of tune. When temperatures hover in the 30s and 40s, a heat pump with a weak reversing valve or low refrigerant will struggle to pull heat from outside air, and you’ll feel it as lukewarm air at the register along with a spike in your electric bill. Repairs follow the same $150 – $700 range as furnace work, with the specific fix depending on what fails.
Reversing valve and defrost board failures
A heat pump stuck in cooling mode during a Decatur cold snap is usually a reversing valve that won’t shift or a defrost board that’s not cycling the outdoor coil properly. Both are repairable without replacing the whole unit. The fix is often under $400 and restores proper heating the same day.
Refrigerant and coil service
Low refrigerant or a clogged indoor coil reduces the heat your system can extract from outside air, and Decatur’s humidity accelerates coil fouling. We’ll test pressures, find the leak if there is one, and recharge only after the leak is fixed, which is the only way a recharge holds.
Heating Repair in Decatur
Heating Repair in Decatur almost always starts with a furnace that fires and then quits, or won’t fire at all, and most of those calls trace back to two cheap parts: a weak capacitor or a dirty flame sensor. Those are $150 – $350 fixes that get misdiagnosed as a dead heat exchanger by less careful outfits. Before we ever recommend replacement, we verify the heat exchanger, check the blower motor, and measure static pressure against what your ductwork can actually move.
Ignitor and flame sensor service
A gas furnace that clicks but won’t light often has a failing hot surface ignitor or a flame sensor coated in carbon from Decatur’s damp combustion air. Replacing an ignitor typically runs $180 – $320. A flame sensor cleaning is on the lower end of that range and takes about twenty minutes.
Gas valve and control board repair
If the furnace lights and then immediately shuts down, the gas valve or control board is suspect. These are more involved: expect $350 – $700 depending on the part and whether it’s an older furnace with a discontinued board. We’ll quote the exact price in writing before ordering anything.
Trusted Brands We Service in Decatur
Dalton Heating & Air is factory-trained on all nine major residential HVAC brands, and our Decatur calls skew heavily toward Goodman, Rheem, York, and Daikin furnaces. We keep common parts for those brands stocked locally so a mid-winter no-heat call doesn’t stall waiting on a shipment. Whether it’s a 20-year-old Goodman in a 1920s bungalow or a newer Daikin in a mid-century ranch, our techs know the failure modes for each brand, not just the spec sheet. That means fewer return trips and a repair that holds past the first cold snap.
Common Furnace Repair Problems We See in Decatur Homes
- Oversized furnaces tripping limit switches. Decatur’s housing mix includes a lot of 1920s bungalows and mid-century ranches with original, undersized ductwork. A modern furnace pushing too much air through those ducts trips the high-limit switch and shuts down, which looks like a furnace failure but is actually an airflow problem.
- Weak capacitors and dirty flame sensors. These are the two most common no-heat culprits we find across Decatur, from Ponce de Leon Avenue to the neighborhoods off East College. Both are cheap repairs that get mistaken for major failures.
- Damp combustion air corroding ignitors. Decatur’s humidity accelerates wear on hot surface ignitors and flame sensors. Houses with crawlspaces or unfinished basements see it faster.
- Short-cycling in mild weather. Because Decatur winters are typically mild, a furnace that’s oversized for the house’s actual load will short-cycle constantly, wasting gas and wearing out the blower motor. A load calculation fixes the sizing question for good.
Pricing for Furnace Repair in Decatur, GA
Most furnace repairs in Decatur run between $150 and $700. A capacitor replacement or flame sensor cleaning lands around $150 – $250. An ignitor or limit switch runs $180 – $350. A gas valve or control board is $350 – $700. We quote the exact price in writing before any work begins, so the figure you approve is the figure you pay.
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heating Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
Call (361) 306-9515 for a free estimate, and we’ll put the number in writing before you commit to anything.
We Also Serve Cities Near Decatur
Our Furnace Repair team covers Decatur and the surrounding communities, including Scottdale, Clarkston, Stone Mountain, and Tucker. If you’re a few miles outside city limits, we’re still close enough to keep response times tight and parts runs short. You’re covered wherever you are in the Decatur area.
Serving Decatur, GA - Our Local Coverage Area
We’re based in the Decatur area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Decatur
Usually not. When a furnace trips the limit switch and blows cool air, the most common cause in Decatur is undersized original ductwork creating high static pressure, not a failing heat exchanger. A service call to measure static pressure and check the blower tells us which it is. Most of the time it’s an airflow correction, not a replacement. Call (361) 306-9515 and we’ll diagnose it in writing.
Repair if the heat exchanger is intact and the blower motor is sound, because Decatur’s mild average winters mean you don’t need a new furnace to survive a normal season. Replace when the heat exchanger cracks or the blower is failing and the unit is over 15 years old. Our techs will show you the failed part and explain the numbers on both sides before you decide.
A load calculation measures your home’s actual heating demand against the furnace size, and in Decatur it often reveals that the existing furnace is oversized for 1920s or mid-century ductwork. That matters because an oversized furnace short-cycles, trips limits, and wastes gas. If you’re replacing, a load calc ensures we quote the right tonnage instead of just matching what’s already there. It’s the difference between a furnace that runs properly and one that fights the house for fifteen years.
AFUE is the number that matters for a furnace, and it tells you what percentage of the gas you buy becomes heat. An 80% AFUE furnace wastes 20 cents of every gas dollar up the flue. A 95% unit wastes 5 cents. On a Decatur home with 1,500 – 2,500 square feet and typical winter usage, moving from 80% to 95% AFUE typically trims $150 – $300 off the annual gas bill. We can run the math on your actual usage and show you whether the efficiency upgrade pays for itself before the furnace’s life is up. Call (361) 306-9515 and we’ll put those numbers in writing.
Yes. Heat pumps are common in Decatur because they handle both heating and cooling, and we repair them daily. Reversing valves, defrost boards, refrigerant leaks, and blower motors all fall under the same $150 – $700 repair range and the same full-year written guarantee. If your heat pump is blowing lukewarm air or cycling oddly, call (361) 306-9515 and a real person will schedule it.
We got a no-heat call from a homeowner on Ponce de Leon Avenue in Decatur running a 20-year-old Goodman furnace. The blower motor was spinning but the burners never lit, and a quick test flagged a weak capacitor on the inducer. After swapping the capacitor and verifying the heat exchanger, we ran a load calculation because the home kept tripping to auxiliary heat, and the original tonnage turned out to be oversized for the ductwork, driving up static pressure and forcing the limit switch to cut out. We corrected the airflow and left the system heating cleanly instead of quoting a replacement it didn’t need.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Decatur under The Garrison Standard.