Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Conyers
Furnace repair in Conyers, GA typically runs between $150 and $700, and most jobs are completed the same day our technician arrives. We serve every corner of Conyers, from the ranch neighborhoods off Salem Road to newer construction near the Georgia International Horse Park. When your heat goes out during a Conyers winter night, call (361) 306-9515 and you’ll speak to a real person, not a voicemail queue.
Dalton Heating & Air is a Garrison Partners company, and we’ve been held to The Garrison Standard since 2003. Marco Benitez leads our service team, and the rules we work under are simple: arrive inside the window we give you, put the price in writing before touching your furnace, do the job by the book, leave the site cleaner than we found it, and stand behind the repair for a full year. If it fails, we return at no charge. That’s the 365-Day Done Right Promise, and it’s not an upsell. It’s the baseline.
Why Dalton Heating & Air Is Conyers’s Preferred Furnace Repair Company
Conyers homeowners call us because we’ve built a reputation for showing up on time and charging what we said we’d charge. The technicians who arrive at your door are background-checked, uniformed, and factory-trained to service nine residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. You’ll know exactly who is walking up your driveway before they ring the bell.
Our crews know Conyers. We understand that older ranch homes along Flat Shoals Road and the neighborhoods near Old Town have different furnace demands than the two-story builds around Honey Creek. We stock common parts locally and dispatch from metro Atlanta with fast response to Conyers. When a Goodman or Rheem furnace fails off Irwin Bridge Road, we don’t spend three days waiting on a part.
Every repair carries a written guarantee. If a repaired furnace fails inside that year, we come back and make it right. No negotiation, no fine print. Marco and the rest of the team operate under The Garrison Code, and we’ve done it that way since 2003.
Heating Repair in Conyers
Heating Repair in Conyers covers the full run of issues that stop a furnace from doing its job: faulty ignitors, failed gas valves, cracked heat exchangers, worn blower motors, and control board problems. When the temperature drops into the 20s at night and your furnace won’t fire, you need a repair call that actually gets answered. That’s the reality of a Conyers winter, and we staff our phones 24/7 with live people for exactly that reason.
Heating repairs in Conyers run $150 to $700, depending on the failed part. A simple ignitor replacement sits at the low end. A gas valve or blower motor runs higher. We diagnose the problem first, then put the exact price in writing before any tools come out. You approve the number or you don’t, and there’s no pressure either way.
Ignitor and Gas Valve Repairs
When a furnace fires up in a Conyers home, the ignitor is the first thing that has to prove itself. If it fails, the burner never lights. It’s a common failure in older units, especially on cold mornings. Gas valves fail less often but cost more to replace.
Blower Motor and Control Board Service
If your furnace runs but air doesn’t move through the vents, the blower motor is the likely culprit. In Conyers’s older ranch homes, we see blower motors dragging because the furnace was oversized at install, which forces more cycling and more wear. We test the motor, check the capacitor, and replace only what’s actually failed.
Boiler Repair in Conyers
Boiler Repair in Conyers matters for a smaller but real slice of homes, mostly older properties and a few converted builds where hydronic heat still runs. When a boiler’s circulator pump fails or the expansion tank waterlogs, you lose heat in every room at once, not just one side of the house. Conyers’s wet, cold winters are unforgiving to a boiler that’s down, because those systems don’t recover fast once the masonry and floors have gone cold.
Boiler repairs in Conyers fall within the same $150 to $700 range as furnace work, though the parts are different. Circulator pumps, aquastats, zone valves, and expansion tanks are the usual suspects. We diagnose the exact failure and put the price in writing. The same 365-Day Done Right Promise applies to boiler work as it does to a furnace.
Circulator Pump and Zone Valve Failures
A failed circulator pump is the most common boiler repair we see in Conyers. When it stops turning, hot water stays in the boiler instead of moving through the baseboards or radiators. Zone valves fail less often, but when one sticks open or closed, a whole section of the house stops getting heat.
Expansion Tank and Pressure Problems
Hydronic systems expand and contract with temperature, and the expansion tank absorbs that change. When it waterlogs, the system pressure swings and the relief valve can leak. In a cold Conyers January, that’s a problem you want caught before the real freeze settles in.
Trusted Brands We Service in Conyers
Our techs work on Goodman, Rheem, and York furnaces regularly, along with Daikin and the other major residential lines. The homes around Conyers contain a lot of Goodman units from the early 2000s, which are now at the age where heat exchangers and blower motors start showing their years. We keep common parts stocked for Conyers calls, so a furnace off Salem Road doesn’t sit cold while we chase an ignitor from a regional warehouse. When you call, tell us the make and model. We’ll show up knowing what we’re walking into.
Common Furnace Repair Problems We See in Conyers Homes
- Failed induced-draft motor capacitor. Conyers mornings sit in the 20s, and a weak capacitor on the draft motor stops the pressure switch from proving. The burner locks out, and you wake up to a cold house. The fix is usually quick and inexpensive, but the symptom looks scarier than it is.
- Short-cycling from oversized furnaces. Conyers’s older ranch homes often got 4-ton furnaces when a proper load calculation says the house needs 2.5 tons. The oversized unit fires, blasts heat, shuts off, and repeats. That cycle cracks heat exchangers over time, and that’s a repair-versus-replace conversation, not a quick fix.
- Dual-fuel changeover issues. Homes with a heat pump and a gas furnace backup are common in this part of Georgia. When the heat pump charge runs low, the furnace takes over continuous duty and wears the blower motor and ignition components faster. What looks like a furnace failure is sometimes a refrigeration problem upstream.
- Water and condensate around the unit. Conyers’s wet winters mean high indoor humidity, and high humidity means more condensate. A clogged condensate line or a failing inducer can leave water where it shouldn’t be, and that water is what finishes off a rust-weakened heat exchanger or control board.
Pricing for Furnace Repair in Conyers, GA
Furnace repair in Conyers runs $150 to $700. We give you the exact price in writing before any work begins, so the number you approve is the number on the invoice. Every quote comes from the same price book, which means the technician at your door can’t invent a new number. Here’s the line-item truth for this market:
| Service | Typical Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
Call (361) 306-9515 and we’ll diagnose the issue, put the fix in writing, and let you decide. The estimate is free. If the repair fails within a year, we return at no charge. That’s not a limited-time offer. It’s the standard every Dalton Heating & Air job is held to.
We Also Serve Cities Near Conyers
Dalton Heating & Air serves Conyers alongside Snellville, Redan, Oxford, and Lilburn. If you’re a few exits up I-20 or across the county line, our crews can usually reach you the same afternoon. We dispatch and schedule from our Atlanta office, and our Furnace Repair team runs routes across the east metro daily.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Conyers
If you have a dual-fuel system in Conyers, it could be either, and the fix changes completely. A heat pump with a low refrigerant charge will run constantly without delivering enough heat, which then forces the gas furnace to carry the whole load. That wears the blower motor and ignition components. A furnace that’s running but not heating could also be tripping its high-limit switch or fighting a clogged filter. Call (361) 306-9515 and we’ll test both systems to find the actual failure, not just the symptom.
A cracked heat exchanger usually announces itself with the smell of exhaust, visible rust or soot around the burner area, or a flame that flutters and rolls instead of burning steady blue. In Conyers’s wet winters, condensation accelerates the rust that leads to those cracks. If you see any of those signs, shut the furnace off and call us. A cracked exchanger leaks carbon monoxide, and that’s a safety issue, not a comfort issue. We inspect it for free, and if replacement is the honest call, we’ll say so plainly.
A proper load calculation tells you what size furnace your Conyers home actually needs, and that number often contradicts what’s currently installed. We’ve found 4-ton furnaces strapped to 2.5-ton ranch houses all over Conyers, especially the older subdivisions. The oversized unit short-cycles, which cracks the heat exchanger and wears out the motor. If your exchanger is already cracked and the furnace is oversized anyway, every dollar put into repair is a dollar spent on a badly sized machine. Sometimes the right repair is a correctly sized replacement.
Cold Conyers mornings mean the furnace has to work hardest at startup, and that’s when weak components fail. A dragging induced-draft blower motor pulls more amps and trips the breaker. A failing ignitor won’t light the burner when it’s 25 degrees outside, even if it worked fine the night before. The draft motor capacitor is the other common culprit. We test these components under load, because throwing the breaker back and hoping doesn’t fix the part that caused the trip.
The difference on a Conyers gas bill comes from how much fuel becomes actual heat. An 80% AFUE furnace wastes 20 cents of every gas dollar out the flue. A 96% AFUE furnace wastes 4 cents. If your gas bill averages $150 a month during heating season, going from 80% to 96% efficiency saves roughly $20 to $25 a month, or around $100 to $125 per winter. That’s real money, and it’s worth weighing against the cost of a $700 repair on an old exchanger. We’ll give you the numbers for your exact home and let you decide, with the price in writing either way.
Call for Fast Furnace Repair in Conyers
When your heat’s out and a Conyers night is dropping into the 20s, you need a company that answers the phone and shows up when it says it will. Call (361) 306-9515 for a free estimate on furnace repair. Marco Benitez and the Dalton Heating & Air team serve all of Conyers, from the neighborhoods along Salem Road to the homes near the Horse Park. You’ll get a written price before any work starts, a technician you can trust at the door, and a full-year guarantee on every repair we make.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Conyers, GA furnace repair under The Garrison Standard since 2003.