Furnace Repair in Clearwater - On-Site Today, Diagnosis First

Fast, Reliable Furnace Repair Across Clearwater

Furnace repair in Clearwater typically costs $150 – $700, and most calls get a same-day diagnosis when you reach us before noon. The salt air off Tampa Bay and the way older Clearwater homes cycle heat during those damp January cold snaps create a very specific set of wear patterns that a technician from outside the area often misreads. If your furnace is short-cycling near Countryside, or a blower motor just seized up in a 1970s ranch off Gulf-to-Bay, you want someone who has seen it before. Call Dalton Heating & Air at (361) 306-9515 and you’ll get a live person, a written price before any work starts, and a technician who treats your Clearwater home like it’s in the neighborhood, because it is.

Call (361) 306-9515

Why Dalton Heating & Air Is Clearwater’s Preferred Furnace Repair Company

Dalton Heating & Air is a Garrison Partners company, and we have held every job to The Garrison Standard since 2003. That means one thing in Clearwater: no technician walks into a home off Drew Street or near Crest Lake without a background check, a uniform, and the training to service Trane, Lennox, Goodman, or Rheem equipment correctly the first time. Our crews arrive inside the stated window, put the price in writing before touching a single screw, and leave the site as clean as they found it. The 365-Day Done Right Promise backs every repair for a full year. If the fix does not hold, we return at no charge. That is not a promotional line. It is The Garrison Code, and it is non-negotiable.

Marco Benitez, who leads our Clearwater repair team, instructs every technician to explain the failure in plain terms before any work begins. You will know what broke, why it broke, and what it costs to fix before you approve anything. Most Clearwater homeowners tell us the same thing: they are done with no-shows and price shifts at the door. We do not work that way. Scheduling and dispatch are coordinated from the South FL office in Miami, but the crews serving Clearwater are local, stocked for common furnace failures, and on call 24 hours a day. You talk to a real person when you call, whether it is Tuesday at noon or 3 a.m. on a freezing night in Dunedin.

Boiler Repair in Clearwater

Boiler Repair in Clearwater is a niche service, but it matters in the older waterfront sections of the city where hydronic systems still heat a good number of homes built before 1980. These are not the forced-air furnaces most Floridians think of; a boiler circulates hot water through pipes and radiators, and a failure usually shows up as cold radiators, banging pipe noise, or a pressure gauge that will not hold. Most boiler repairs in Clearwater run $200 – $600 depending on whether it is a circulator pump, an aquastat, or a pressure relief valve. The job involves diagnosing the component, flushing or bleeding the line if needed, and replacing the failed part with a factory-matched unit.

Circulator Pump and Aquastat Failures

Near Clearwater Harbor, we see circulator pumps that corrode faster than inland units do because the salt-laden air works at the housing. An aquastat that will not hold temperature is common in older boilers that have never been converted for Florida’s short, intermittent heating season. Both repairs are usually completed the same day if parts are in the truck, and they are not.

Pressure and Leak Checks

Low system pressure from a slow leak is often the easiest boiler fault to fix but the most disruptive to ignore. A technician will check the expansion tank, relief valve, and all visible fittings, then restore the system to the manufacturer’s specified pressure. If the leak is internal to a cracked heat exchanger, we will tell you plainly and quote a written replacement price before you spend another dollar on repairs.

Gas Furnace Repair in Clearwater

Gas Furnace Repair in Clearwater covers the most common heating failure we see across Pinellas County: a furnace that fires up, runs briefly, then shuts down without reaching set temperature. That short-cycling pattern is often the flame sensor or ignitor, and it is a $150 – $350 fix in most Clearwater homes. The job involves verifying gas pressure at the valve, cleaning or replacing the ignitor or flame sensor, checking the draft inducer, and confirming the heat exchanger is sound before burners are allowed to run again. Gas work always includes a safety check on the exhaust path, which matters in tight Florida attics and closets.

Ignitor and Flame Sensor Work

The hot surface ignitor on a gas furnace is a wear item, and in Clearwater’s salt air it can fail after five to eight years. If the ignitor glows but the burner does not light, or the unit runs for a minute then shuts off, the repair is fast, clean, and very common. We carry Trane, Lennox, and Goodman ignitors on the truck for same-day completion.

Gas Valve and Draft Inducer Repair

A gas valve that will not open, or one that chatters while the burners run, is a more involved repair that usually lands between $350 and $700 in Clearwater because of part cost and the test procedures involved after installation. The draft inducer, which pulls combustion gases up the flue and away from your living space, is another component that fails slowly in humid, salty air. We pressure-test both after any gas repair and verify zero carbon monoxide backflow before leaving.

Trusted Brands We Service in Clearwater

Dalton Heating & Air technicians are factory-trained to service nine major residential brands, including Trane, Lennox, and Goodman, which happen to be the three we see most often in Clearwater homes built from the 1970s through the 2000s. When we do a job on a Lennox furnace in Countryside or a Trane unit in a Safety Harbor-adjacent neighborhood, the part going in is matched to the unit’s factory spec, not a universal substitute that shortens the system’s life. We stock common ignitors, flame sensors, pressure switches, and blower motors for these brands in the trucks that serve Clearwater, which means fewer second trips and a faster turnaround on most repairs. If your furnace carries a Rheem or Goodman badge, the same applies: correct parts, written price, work guaranteed for a full year.

If your Clearwater home needs heat pump installation instead of a furnace repair, we also handle Heat Pump Installation in Clearwater, which is often the right long-term move for Florida’s humid shoulder seasons. And when the AC side fails, our AC Repair in Clearwater team is on call year-round.

Common Furnace Repair Problems We See in Clearwater Homes

• Short-cycling in older masonry-block homes. Houses built in the 1960s and 70s across Clearwater’s central neighborhoods often have ductwork that was sized for AC only, and the air volume drops when the furnace runs hotter than the AC ever did. The furnace overheats, the limit switch trips, and the unit starts and stops every few minutes. The fix is usually airflow correction plus a limit switch replacement, and it lands around $200 – $400.
• Blower motor failure after months of humidity. Florida’s wet season pushes condensation into places a blower motor does not like. When a furnace sits idle from March through November, the motor bearings can rust in place. Clearwater’s Gulf-adjacent humidity makes this worse near the water than inland. A blower motor replacement typically runs $300 – $600 depending on the ECM vs. PSC motor type.
• Ignitor failures on infrequently used furnaces. Clearwater furnaces run fewer hours than northern units but they cycle on and off more sharply during cold fronts, and each cold start stresses the ignitor. A furnace that ran normally in December and will not light in January almost always has a cracked or open ignitor. The part costs less than the service call usually, and the total is typically under $300.
• Clogged condensate lines on high-efficiency units. Ninety-percent efficient furnaces produce condensate, and the drain lines clog with the same algae and dust that Clearwater AC drains collect. A backed-up line will shut the furnace down on a float switch. Clearing it is typically $150 – $250 and includes a flush of the line and a check of the switch.

Pricing for Furnace Repair in Clearwater, FL

We Also Serve Cities Near Clearwater

Dalton Heating & Air performs Furnace Repair work across Clearwater and the surrounding Pinellas communities. That includes Largo, Safety Harbor, Dunedin, and Pinellas Park, all within about 25 minutes of most Clearwater neighborhoods. If you are in one of those cities, you get the same written pricing, the same on-time window, and the same 365-Day promise. See the full scope of our Clearwater service area, or just call and ask a live person if we cover your street. We probably do.

FAQs About Furnace Repair in Clearwater