Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Arlington
Furnace repair in Arlington, MA typically runs $150 – $700, and most no-heat calls can be diagnosed and fixed the same day. If your heat is out on a January night in East Arlington or Arlington Heights, you need a tech who shows up inside the window, puts the price in writing before touching anything, and knows the difference between an oil burner failure and a heat pump changeover problem. That’s what we do. Call (361) 306-9515 and a live person answers, 24/7.
Arlington’s housing stock is older than a lot of homeowners realize. Colonials and Capes built before 1970, plenty with original ductwork retrofitted over decades. That means the furnace in a Jason Street two-family is not the same job as a furnace in a Brattle Street single-family, even if the symptom is identical. We dispatch from our Boston office, but our crews work Arlington neighborhoods every day. They know Massachusetts Avenue, they know the hill sections, and they know that Spypond area homes tend to run different fuels than the rest of town.
Why Dalton Heating & Air Is Arlington’s Preferred Furnace Repair Company
Our Furnace Repair team works under a standard most Arlington homeowners tell us they have never seen enforced. Every job starts with a written price before any work begins. Every repair carries a written guarantee for a full year. If it fails in that time, we return at no charge. Those are not upgrades. They are the default, because that is The Garrison Standard, and Dalton Heating & Air has operated under it since 2003 as a Garrison Partners company.
When we roll a truck into Arlington, the homeowner knows who is coming before the doorbell rings. Our technicians are background-checked and uniformed. They carry parts for the major brands Arlington homes actually run: Trane, Lennox, Goodman, Rheem. And Marco Benitez, who leads Dalton, holds every tech to The Garrison Code: arrive in the window, price in writing, do it by the book, leave the site clean, stand behind it for a year. No exceptions.
We run service calls into Arlington every day, including weekends and overnights. That matters in a town where a lot of thermal homes were converted from oil to gas or heat pumps at different points, so the same street can have three different fuel types. You need a crew that asks what fuel you are on before quoting anything.
Emergency Furnace Repair in Arlington
Emergency Furnace Repair in Arlington usually means a no-heat call on the coldest night of the year, and the first question should never be “when can you come” but “what fuel do you run.” We answer our own phones live, 24/7, so when a Winchester line home goes down at 2 a.m., a person picks up and starts dispatch. Most emergency furnace repair in Arlington runs $150 – $700, same range as standard repair, and we do not charge overtime on emergency calls. The price is in writing before we start.
No-Heat Diagnostics and Safety
A no-heat homeowner wants the burner lit, obviously. But a cracked heat exchanger is a carbon monoxide risk, and we will not band-aid that to get the house warm. If the exchanger is cracked, we show you, we quote replacement honestly, and we talk repair-versus-replace using the home’s actual load, not a guess.
Same-Day Oil, Gas, and Heat Pump Response
Arlington is one of the few towns in the Boston metro where oil heat is still a meaningful share of the housing stock. We dispatch techs who actually know oil burners, not just gas valves. If your heat pump furnace combo fails over to emergency electric strip heat, we check the refrigerant circuit and capacitor health, because treating it like a gas furnace wastes your money and leaves the house cold.
Furnace Maintenance in Arlington
Furnace Maintenance in Arlington is different from maintenance in a town where every house runs the same fuel and the same equipment age. Here we see oil furnaces from the 1990s next to heat pumps installed in 2021 next to gas conversions from 2008. A tune-up on an oil furnace means cleaning the burner and checking the heat exchanger. A tune-up on a heat pump means checking charge, capacitors, and the reversing valve. Our maintenance visits run $80 – $200, flat price in writing before we start.
Combustion and Safety Inspection
Every maintenance call includes a combustion check and a visual on the heat exchanger. In an older oil furnace, a cracked exchanger is not rare. We catch it before it becomes a carbon monoxide problem, and we tell you plainly if the repair is worth doing or if the unit is done.
Filter, Blower, and Airflow Verification
We measure static pressure on every maintenance call in Arlington. An oversized furnace cycling on its limit switch is one of the most common misdiagnosed problems we see, and it reads like a failed part to a tech who skips the measurement. We don’t skip it.
Trusted Brands We Service in Arlington
We service and stock parts for the brands we actually see in Arlington homes: Trane, Lennox, Goodman, and Rheem. That covers most of the furnaces and heat pumps in the Minuteman Bikeway neighborhoods and the Capitol Square area. Repair parts for these brands are on our trucks, not ordered and shipped, so a no-heat call on a Friday afternoon in February doesn’t turn into a Monday fix. If your furnace is a brand outside that list, we still service it, but the parts lead time is what it is, and we tell you that before you spend anything.
Common Furnace Repair Problems We See in Arlington Homes
- Oil burner won’t stay lit. In Arlington Heights and Morningside, a lot of homes still run oil. When the burner lights and drops out, it is usually the CAD cell eyes or a clogged nozzle, not the control board. A tech who starts by replacing the ignition transformer on an oil furnace is guessing.
- Heat pump furnace combo blows cold air. Hybrid systems are common in East Arlington and near Spy Pond. The outdoor unit runs, the air handler blows, but the air is cold. Nine times out of ten it is a refrigerant charge or a failed capacitor, and a furnace-only tech will misread it as a furnace problem.
- Oversized furnace cycling on limit. Older Arlington Capes and Colonials often got a furnace sized for the whole original footprint, then additions got added. The short-cycling that results looks like a bad limit switch. We run the load calculation before replacing parts, because the fix is often the equipment size, not the switch.
- Ignitor failure on a gas conversion. Many Arlington homes converted from oil to gas over the last twenty years. Hot surface ignitors fail at predictable intervals. It is a $150 – $400 fix in most cases, and we carry the common ones on the truck.
Pricing for Furnace Repair in Arlington, MA
Most furnace repairs in Arlington run $150 – $700 depending on the part and the fuel type. A hot surface ignitor or a flame sensor runs on the low end of that range. A blower motor, gas valve, or oil burner primary control runs higher. A full heat exchanger replacement on an older unit usually pushes past the top of the range, and at that point repair-versus-replace becomes the real conversation. We give you the written price after diagnosis and before any work starts. The diagnosis call itself includes that written quote at no obligation.
| Service | Arlington Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Emergency Furnace Repair | $150 – $700 |
| Furnace Maintenance / Tune-Up | $80 – $200 |
Call (361) 306-9515 for an exact quote. Estimates are free, in writing, and zero pressure.
We Also Serve Cities Near Arlington
Our crews cover Arlington and the surrounding towns: Belmont, Winchester, Medford, and Cambridge. If you are in a neighboring town and the heat is out, the same written pricing and full-year guarantee apply. Dispatch is the same live-answer line: (361) 306-9515.
Serving Arlington, MA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Arlington
Check the thermostat batteries first, then check your circuit breaker, then check your fuel source. If you run oil, see if the tank gauge reads empty. If you run a heat pump, look at the outdoor unit: is it running, and is it iced over? If the thermostat screen is blank or the breaker is tripped, that is a $0 fix. If those are fine, call us at (361) 306-9515 and describe what you see and hear. We will tell you whether it is worth a tech visit before we dispatch.
Most furnace repairs in Arlington run $150 – $700. The spread is driven by the part, the fuel type, and whether the unit is a conventional gas furnace, an oil burner, or a heat pump. We write the exact price after diagnosis and before any work starts. You approve the number before we touch a wrench.
Replace if the heat exchanger is cracked, if the repair is over 40% of a new system cost and the unit is past 15 years old, or if the furnace is oversized and short-cycling. Otherwise, repair is usually the right call. We run a load calculation before recommending replacement, and we show you the math. It is your call, and we lay out both sides in writing with real numbers from the Arlington market.
Yes. Oil furnaces and heat pump furnace combos are a significant share of the heating equipment in Arlington, and we staff techs who work on both regularly. If your home runs oil, we pull the burner and inspect the exchanger. If it runs a heat pump, we check the charge, capacitors, and reversing valve. We will tell you exactly what we find and quote the repair in writing.
SEER2 is the updated federal efficiency test standard for heat pumps and air conditioners that went into effect in 2023. It measures cooling efficiency under more realistic conditions than the old SEER test. When you replace a furnace with a heat pump in Arlington, the SEER2 rating tells you how much the cooling side will cost to run, and it affects rebate eligibility. We calculate what a higher SEER2 unit saves you on an actual Arlington electricity bill before you decide. Call (361) 306-9515 and we will run the numbers.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Arlington and the surrounding Boston metro.