Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Ardmore
Furnace repair in Ardmore typically runs $150 – $700 depending on the part and the furnace, and most no-heat calls get a same-day visit from a Dalton Heating & Air technician. We work across Ardmore’s full range of housing stock, from 1920s stone twins off Cricket Avenue to post-war capes near Ardmore Avenue. When your heat goes out in a February cold snap, you don’t need a callback window. You need a tech who shows up inside the stated window, writes the price down before touching a screwdriver, and backs the repair for a full year. That’s how we operate. Call (361) 306-9515 and a live person picks up, 24/7.
Why Dalton Heating & Air Is Ardmore’s Preferred Furnace Repair Company
Ardmore homeowners deal with real, specific furnace problems: cracked heat exchangers in steam-converted stone twins, blower motors that trip limit switches because the ductwork was never resized for forced air, and pressure-switch faults on damp fall mornings. Our techs know these failure patterns because we see them every week on Ardmore streets. The Furnace Repair in Ardmore work we do is built on The Garrison Standard, which has governed every job since 2003: arrive inside the window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the repair for a full year.
Every Dalton call includes a written guarantee on the repair and a free return visit if it fails inside the guarantee period. No upgrades needed. It’s the default. And every technician is background-checked, uniformed, and factory-trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. You know who’s coming before they arrive. Marco Benitez, who leads our trade operations, holds every Ardmore job to that standard personally.
Heating Repair in Ardmore
Heating Repair in Ardmore means diagnosing and fixing whatever is keeping a forced-air furnace from doing its job, usually on a day when outside temperatures are in the teens and the house is losing heat fast. The work covers ignitors, flame sensors, gas valves, blower motors, control boards, and the safety circuits that shut a furnace down before it becomes dangerous. Most heating repairs in Ardmore run $150 – $700 depending on the part. A failed ignitor or flame sensor lands on the low end. A blower motor replacement lands higher. The price is written before any work starts, every time.
Furnace Tune-Up
A tune-up in Ardmore is $80 – $200 and catches the problems that become no-heat calls later: dirty burners, weak capacitors, drift in the thermostat calibration, and hairline cracks developing at the heat exchanger seams. We test combustion, check static pressure, and write up what we found. Our techs don’t work on commission so there’s no incentive to sell you a part you don’t need.
Ignitor Replacement
Older furnaces with hot-surface ignitors fail without warning, usually on the coldest night of the year. On many Goodman and Rheem units in Ardmore basements, the ignitor cracks from thermal cycling and the furnace locks out. Replacement is a same-day job and lands in the $150 – $350 range on most systems.
Boiler Repair in Ardmore
Boiler Repair in Ardmore is a specialty skill, not a sideline, and it matters here because a large share of Ardmore’s 1920s Main Line stone twins still run original gravity boilers or converted steam systems with radiators. These are not the same as forced-air furnaces and a furnace tech who doesn’t know steam traps, air vents, and pressuretrols can make things worse. Boiler repair in Ardmore runs $150 – $700, with jobs like gas-valve replacement and circulator-pump work on the higher end. We diagnose any boiler system, from post-war steel fire-tube units to modern condensing boilers, and every repair gets the same one-year written guarantee.
Gas Valve Repair
A boiler that won’t fire, or a furnace that fires then drops out, often points to a gas valve that’s not opening reliably. We test manifold pressure and valve signal before condemning anything. Replacement is a same-day repair on most units we stock for, and we carry valves for the common brands in Ardmore’s boiler stock.
Heat Exchanger Repair
When a heat exchanger cracks, the question is whether to repair or replace, and that answer depends on furnace age, part availability, and what the static pressure readings say about the ductwork. We don’t patch a heat exchanger on a 20-year-old furnace without showing you the math on a replacement. You get the numbers, not a sales pitch.
Trusted Brands We Service in Ardmore
Our techs are factory-trained on nine major residential HVAC brands, including Goodman, Rheem, York, and Daikin, along with Carrier, Trane, Lennox, Bryant, and American Standard. That matters in Ardmore because the parts supply chain here moves faster when a tech knows the exact revision of a control board or a pressure switch rather than guessing at a universal part. We keep common failure parts stocked for the brands we see most in Ardmore basements, which means fewer second trips and faster fix times on no-heat calls.
Common Furnace Repair Problems We See in Ardmore Homes
- Cracked heat exchangers on 15 – 20 year old furnaces in steam-converted homes. Ardmore’s 1920s stone twins were built for gravity heat or steam, and many got forced-air retrofits without matching ductwork. The result is high static pressure and heat exchangers that crack at the drum face long before their rated life.
- Failed blower motors and weak capacitors on short-cycling furnaces. A drafty Main Line twin with radiators and a retrofit forced-air system puts unusual load on the blower. When the thermostat drifts or the return is undersized, the blower runs longer and harder, and the capacitor is usually the first thing to go.
- Induced-draft and pressure-switch faults after a humid summer. Ardmore basements hold moisture, and when return-air leaks pull that damp air into a Bryant or Goodman unit, the pressure switch reads wrong and the furnace locks out on the first cold snap. We find return-air leaks as often as we replace the switch itself.
- Ignitor failures on units that cycle irregularly. Older hot-surface ignitors fail from thermal stress, and they always fail when the furnace is working hardest. It’s the most common same-day repair in Ardmore between December and March.
Pricing for Furnace Repair in Ardmore, PA
Here’s what to expect on a furnace repair bill in Ardmore, PA:
| Service | Typical Range in Ardmore |
|---|---|
| Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
What moves the number is the part, not the labor. An ignitor or flame sensor is a small, quick job. A blower motor or gas valve costs more because the part itself is expensive. A heat exchanger replacement is really a replacement conversation, and we’ll show you the math on both paths before you spend a dollar. Every estimate is free and every price is in writing before any work starts.
We Also Serve Cities Near Ardmore
Our Furnace Repair team covers the neighborhoods immediately around Ardmore, including Narberth, Bryn Mawr, Merion Station, and Bala Cynwyd. Same-day service is available across the whole area. If you’re a few blocks over the township line, the standard is identical: written pricing, on-time arrival, and a full-year guarantee.
Serving Ardmore, PA - Our Local Coverage Area
We’re based in the Ardmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Ardmore
Tripping the limit switch repeatedly usually means the furnace is overheating, which points to low airflow, a dirty filter, an undersized return, or a cracked heat exchanger. Repair is often possible at $150 – $700 if the cause is a bad blower capacitor or a clogged filter, but if the static pressure is far above the nameplate rating, a repair will keep tripping and you’re looking at a duct correction or a replacement. We’ll test static pressure on the first visit so you know which path you’re actually on. Call (361) 306-9515 for a diagnostic.
A real Manual J load calculation changes everything, because Ardmore’s housing stock is not uniform: a 1920s stone twin and a post-war cape have completely different heat-loss profiles, and a one-size-fits-all quote is guesswork. The load calculation sizes the furnace to the actual house, which affects equipment cost, duct sizing, and operating cost over 15 – 20 years. We run one on every replacement quote in Ardmore, no exceptions, and the price is in writing before you sign anything.
At 18 years old, the decision hinges on three numbers: the repair cost, the furnace’s efficiency rating, and whether the ductwork and venting will support a modern unit. If the repair is under $700 and the heat exchanger is intact, repairing can make sense. If the heat exchanger is cracked or the furnace is under 80% efficient, replacement usually pays for itself within the unit’s life. We show you the numbers on both options and the decision is yours.
We work on both. Ardmore has a lot of original gravity and steam boilers, and boiler repair is a core part of what we do. Gas valve replacement, circulator pump repair, steam trap issues, and pressuretrol calibration all fall under the same $150 – $700 range and the same one-year written guarantee as furnace work.
A no-heat diagnostic and repair in Ardmore typically runs $150 – $700 total, depending on what failed. The diagnostic is part of the call, and most common no-heat failures (ignitors, flame sensors, pressure switches) land in the lower half of that range. You’ll get the exact price in writing before any repair work starts, and the estimate is free.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Ardmore and surrounding communities under The Garrison Standard since 2003.