Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Vancouver, WA
HVAC work in Vancouver, WA has a particular rhythm to it: systems here face damp, cool winters and a short but intense summer stretch, often in homes built anywhere from the 1970s to the mid-2010s. That mix means a lot of heat pumps and gas furnaces doing double duty, and it means the age of the house has as much to do with the repair or install as the equipment itself. Dalton Heating & Air does AC repair, heat pump installation, and furnace repair across Vancouver with written pricing before any work starts, a written guarantee on every repair, and a live person answering the phone at (361) 306-9515 around the clock.
Why Vancouver Homes Are Different
Vancouver sits on the north bank of the Columbia River, which shapes the HVAC load differently than Portland’s south side. The river moderates temperatures in neighborhoods like Waterfront and Shumway, but the hills east of I-205 – Fisher’s Landing, Cascade Park, and the Heights above Mill Plain – catch more east wind and run a few degrees colder in January. Homes built in the 1980s and 1990s often came with original gas furnaces and no central air, which is why so many Vancouver homeowners now add or replace heat pumps rather than patch an aging furnace one more time.
Housing stock matters. The tighter, newer construction in east Vancouver holds heat better than the 1970s two-story homes along Fourth Plain and St. Johns, where ductwork is often undersized for the square footage. We regularly find flex-duct runs that have sagged or separated in crawlspaces near Mill Plain and Andresen, which is a quiet efficiency loss most homeowners never see on the monthly bill. Add in the Washington State energy code updates and the HOA rules in master-planned communities like Felida and Salmon Creek, and a Vancouver job is rarely the same as one across the river.
Our Main Vancouver Services
Two jobs dominate the call board in Vancouver: air conditioners that quit in July and furnaces that fail in the first cold week of November. Heat pump installation is the third leg, and it is growing as the region pushes toward electric heating.
AC Repair in Vancouver
When a Vancouver home’s air conditioner stops cooling in July or August, the most common cause we find is a failed capacitor or a refrigerant leak at a braze joint, not a dead compressor. The fix is usually done in one visit. If your system is over 12 years old and coolant is leaking, we will lay out the numbers honestly rather than refill a system that is going to leak again next summer. Details on pricing and coverage are on the AC Repair in Vancouver page.
Heat Pump Installation in Vancouver
A properly sized heat pump covers both cooling and heating, which makes sense in Vancouver homes that already have ductwork from a gas furnace. The site we see often is a ranch on a crawlspace in Hazel Dell or a two-story near Burton Ridge, where a 3-ton unit is too small for the square footage and a variable-speed unit is worth the difference. We size by Manual J, not by matching whatever was there before. Read the full scope on the Heat Pump Installation in Vancouver page.
Furnace Repair in Vancouver
Vancouver furnaces take a beating from late October through early April, and most repairs involve an igniter, flame sensor, gas valve, or blower motor. When a furnace fails in east county, the priority is getting heat back on the same day, which is one reason a live human answers our phone 24/7. If the heat exchanger is cracked, we do not band-aid it – we show you what we found and give a written price for the correct repair. See Furnace Repair in Vancouver for typical costs and parts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Vancouver
Our technicians are factory-trained on Trane, Lennox, Goodman, and Rheem, and we service all nine major residential brands listed on our brands page. We stock common capacitors, igniters, flame sensors, and contactors on the truck, which keeps most Vancouver repairs to a single visit.
Pricing for HVAC Company in Vancouver, WA
| Service | Typical range in Vancouver |
|---|---|
| AC repair (capacitor, contactor, basics) | $150 – $650 |
| Furnace repair (igniter, flame sensor, gas valve) | $150 – $700 |
| AC installation | $3,500 – $7,500 |
| Heat pump tune-up or furnace tune-up | $80 – $200 |
What pushes a Vancouver repair toward the top of that range is usually the part itself – a variable-speed blower motor costs more than a flame sensor – and how long it takes to safely access the unit. The price you get from Dalton is in writing before any work begins, and it does not change at the door.
Neighborhoods We Serve in Vancouver
Our trucks run the full width of the city: from the older grid west of I-5 to the 2000s-era subdivisions east of 162nd Avenue. We know the crawlspace issues common near Pacific Community Park, the oversized two-story layouts in Cascade Highlands, and the heat pump retrofits going into homes around Wy’East and Ogden.
- Downtown and Esther Short
- Hazel Dell and Minnehaha
- Salmon Creek and Felida
- Fisher’s Landing and Cascade Park
- Amboy and Hockinson (outlying)
Most of Vancouver is within a 30 to 45 minute drive from our dispatch point, so same-day repair is realistic in most neighborhoods during regular hours.
Service Area – Cities Near Vancouver
Beyond Vancouver city limits, we handle HVAC work in the neighboring communities. To the north we cover Ridgefield, CT and Battle Ground, WA. Across the river’s east side, we run calls in Camas, WA. And to the west, La Center, WA is within our regular dispatch area.
Serving Vancouver, WA - Our Local Coverage Area
We’re based in the Vancouver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Vancouver
Same-day service is available across most of Vancouver. If you call before noon, we can usually get a technician there by late afternoon. Calls are answered by a live person at (361) 306-9515, 24/7, so you will get a straight answer about our current schedule.
Most heat pump and AC installations in Vancouver require a mechanical permit, and the contractor typically pulls it. We handle the permit paperwork on installations and make sure the work is ready for the city inspection before the job is done.
Yes. We run calls from downtown and the west side up through Hazel Dell, Salmon Creek, and into east Vancouver neighborhoods like Fisher’s Landing and Cascade Park. Our dispatch is coordinated from Seattle, but the crews are stationed locally and route based on your neighborhood.
If you need HVAC work in Vancouver, call Dalton Heating & Air at (361) 306-9515. A live person answers 24/7, the estimate is free, and the price is in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Vancouver Customers Say
"Coil cleaning and a refrigerant check before summer. AC has never been this cold."
- Marty D."Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B.