Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Union City
Heat pump installation in Union City, GA typically runs $3,500 – $7,500 for a full system, and the job usually takes one to two days once equipment arrives. We serve Union City from our Atlanta-coordinated dispatch, with crews working locally throughout the area. If you’re weighing a heat pump against another Georgia summer of high cooling bills or debating repair versus replacement, call Dalton Heating & Air at (361) 306-9515. We’ll give you a written price before any work starts, and we won’t quote tonnage over the phone without measuring your house first.
What sets a good Union City heat pump install apart isn’t the brand on the box. It’s whether anyone actually measured your ductwork, checked static pressure, and ran a load calculation before telling you what size unit you need. Most quotes skip that step. We don’t.
Why Dalton Heating & Air Is Union City’s Preferred Heat Pump Installation Company
Homeowners in Union City tend to ask the same two questions when we walk a job: “How do I know the size is right?” and “What happens if it doesn’t work right after you leave?” Those are fair questions, and they have straight answers.
We’re a Garrison Partners company, held to The Garrison Standard since 2003. That means a written price before any work begins, a written guarantee on every repair, and a full year of coverage through our 365-Day Done Right Promise. If the work doesn’t hold, we come back at no charge. That’s not a promotion. It’s the rule.
Our Union City installs are handled by background-checked, uniformed technicians. You’ll know who’s arriving before they pull in the driveway. We service all nine major residential brands, including Trane, Lennox, Goodman, and Rheem, so we’re not going to push you toward one manufacturer because it’s the only one we carry. Marco Benitez leads our installation team, and he holds every job to the same standard: arrive inside the stated window, price in writing, do the job by the book, leave the site clean.
Our reputation in Union City comes from showing up and doing the job the same way every time. That’s the whole pitch.
Heat Pump Maintenance in Union City
Heat pump maintenance in Union City is the cheapest insurance you’ll buy for your HVAC system. A tune-up here runs $80 – $200, and it’s the difference between catching a failing capacitor in March and finding out about it on a 95-degree afternoon in July. We check refrigerant levels, clean the coils, test the reversing valve, measure airflow, and inspect electrical connections. In Union City’s humidity, a coil that’s even partially clogged makes the whole system work harder than it should.
What a Tune-Up Catches Before It Costs You
Coil cleaning alone can restore lost capacity on an older heat pump. We also check the condensate drain line, which in Georgia summers can grow algae fast enough to back up and trip a float switch. A backed-up drain is a common no-cooling call, and it’s almost always preventable with a seasonal visit.
Written Report, No Upsell Pressure
Every maintenance visit ends with a written report of what we found and what we did. Our technicians are not paid on what they sell, so if something does need attention, the recommendation comes from the condition of the equipment, not a commission target. You’ll get the price in writing before any additional work starts.
Geothermal Heat Pump Installation in Union City
Geothermal heat pump installation in Union City is a bigger upfront investment that pays off over years, not months. These systems use the constant temperature of the ground to move heat instead of fighting Union City’s air temperature swings. The loop field is the main variable cost, and a proper site assessment determines whether your lot can support horizontal trenches or needs vertical bores.
Is Geothermal Worth It on a Union City Lot?
Union City’s soil conditions and lot sizes vary enough that there’s no one-size answer. Older postwar lots on the western side of town tend to have more open yard space, which can make horizontal loops feasible. Newer subdivisions with tighter setbacks often require vertical drilling, which adds cost but uses less surface area. We’ll tell you straight what works on your specific property before you spend a dollar.
What a Geothermal Quote Includes
Every geothermal quote we write includes the loop field, the indoor unit, the ductwork modifications if needed, and the electrical work. That’s the only honest way to price it. You don’t want three separate contractors pointing at each other when something doesn’t work. One written price, one crew responsible, one year of coverage under the 365-Day Done Right Promise.
For standard air-source systems, our Heat Pump Installation team handles everything from load calculation to startup. For geothermal, Marco Benitez personally reviews the site assessment before we finalize a number.
Trusted Brands We Service in Union City
We stock parts for Trane, Lennox, and Goodman systems locally, which means faster turnaround when a repair is needed in Union City. Rheem is the same story. Being factory-trained across nine major brands means we’re not married to one manufacturer’s line sheet. We match the equipment to the house, not the other way around. If your existing heat pump is a Goodman and you want to stay with Goodman for the replacement, we’ll give you an honest price on it. If a Lennox would better match your ductwork, we’ll tell you why and put the numbers in writing.
Common Heat Pump Installation Problems We See in Union City Homes
- Oversized units from square-footage quoting: Union City’s housing stock ranges from 1960s ranches to new-build subdivisions, and two homes of identical square footage six blocks apart can need different tonnage once you measure ductwork, static pressure, and window orientation. An oversized unit short-cycles, which kills efficiency and leaves humidity in the house.
- Ignored static pressure on existing ductwork: A new heat pump pushed through undersized ducts starves the evaporator coil of airflow. You paid for a SEER2 rating the system never actually hits. We measure static pressure on every install and tell you if duct modifications are needed.
- Refrigerant charge problems mistaken for a dead unit: Sometimes a heat pump that “needs replacing” just has a slow leak. A leak test and recharge runs far less than a new system, and we’ll tell you if that’s the honest fix before we ever quote a replacement.
- One tonnage quote over the phone, no visit: If a company quotes you a unit size without sending someone to measure, walk away. That number means nothing until someone has looked at your ducts, your insulation, and your window exposure.
Pricing for Heat Pump Installation in Union City, GA
A full heat pump installation in Union City runs $3,500 – $7,500 depending on system size, efficiency tier, and ductwork condition. Heat pump repair typically falls between $150 and $650. Tune-ups run $80 – $200. If you have a dual-fuel setup with a furnace as backup, furnace repair runs $150 – $700. Here’s the breakdown:
| Service | Typical Union City Range |
|---|---|
| Heat pump installation (full system) | $3,500 – $7,500 |
| AC repair / heat pump repair (diagnostic + part) | $150 – $650 |
| Tune-up (maintenance visit) | $80 – $200 |
| Furnace repair (if dual-fuel setup) | $150 – $700 |
The biggest cost variable is whether your existing ductwork can handle the new system. If it can’t, that’s a line item on the written quote, not a surprise later. Estimates are free, and the price we quote is the price you pay. Call (361) 306-9515 to schedule a load calculation and get a real number for your house.
We Also Serve Cities Near Union City
Dalton Heating & Air serves Union City and the surrounding South Fulton communities, including Fairburn, Palmetto, Riverdale, and Forest Park. If you’re just outside the city line, chances are we’re already working in your neighborhood this week. Give us a call and we’ll confirm our next available window.
Serving Union City, GA - Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Union City
If the repair cost is under 40% of the replacement cost and the unit is under 12 years old, repair usually makes sense. In Union City, where a full heat pump replacement runs $3,500 – $7,500, that means a repair under roughly $1,400 – $3,000 is often the right call. We’ll show you the numbers on both paths and let you decide. Call (361) 306-9515 for an honest assessment.
Yes, a modern heat pump handles Union City’s winters without issue. The city’s winter lows rarely stay below freezing for long, which is exactly the range where heat pumps operate efficiently. In older, draftier homes, a dual-fuel setup with a furnace backup makes sense. In tighter homes, a heat pump alone can handle the full year. A load calculation tells you which path fits your house.
It changes the tonnage number, and that changes everything else. Our tech was at a ranch near Shannon Mall in Union City where the homeowner had been quoted a 4-ton replacement over the phone. We ran a load calculation, found the existing ductwork was undersized for that tonnage, and stepped it down to a 3-ton Trane with a matched evaporator coil. The result was a system that hit its rated SEER2 instead of short-cycling through the summer. Without the calculation, the homeowner would have paid more for worse performance.
SEER2 is the efficiency rating under real-world testing conditions. A higher number means lower operating cost, but only if the system was installed correctly. An undersized duct system can knock a 16 SEER2 unit down to performing like a 13. In Union City, where cooling bills run from May through September, that difference shows up every month on your Georgia Power statement.
Twice a year: once in spring before cooling season, once in fall before heating season. Tune-ups run $80 – $200 per visit, and they catch the small failures before they become July emergencies. In Union City’s humidity, a seasonal coil cleaning and drain line check prevents most of the no-cooling calls we get in summer. Call (361) 306-9515 to book your next maintenance visit.
Call Dalton Heating & Air for Heat Pump Installation in Union City
If you want a heat pump quote that’s based on your actual house, not a square-footage chart, call (361) 306-9515. We’ll send a background-checked, uniformed technician to run a load calculation, check your ductwork, and give you a written price before any work begins. No phone-tonnage guesses, no price that shifts at the door, no half-finished job. The Garrison Standard has been our rule since 2003, and it applies to every install in Union City.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Union City and the South Fulton area.