Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Redwood
Heat pump installation in Redwood, TX typically runs $3,500 – $7,500 for a full system, and the single biggest factor is whether the installer does a real load calculation or just matches your old tonnage. We do the calculation. Every time. If your existing system is struggling through a Redwood summer or your electric bill has crept up year after year, call Dalton Heating & Air at (361) 306-9515 and we’ll give you a written price before any work starts. No square-footage guesswork. No charge-by-rule-of-thumb. Just the right-sized heat pump for your house.
Marco Benitez runs our Redwood heat pump installation work, and he holds every crew to The Garrison Standard: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Why Dalton Heating & Air Is Redwood’s Preferred Heat Pump Installation Company
Redwood homeowners call us after they’ve been burned. That is not marketing language. It’s the pattern we see week after week. A crew shows up late, quotes one number on the phone, then tacks on “duct modifications” or “code updates” after the old unit is already pulled. We don’t operate that way. Dalton Heating & Air has been part of the Garrison Partners network since 2003, and every location is independently owned and operated under The Garrison Code. That code is specific: written price before any work, a written guarantee on every repair, and a free return visit if the repair fails within the guarantee period.
Our dispatch and scheduling run through the brand’s Dallas-Fort Worth office, but the technicians who knock on your door in Redwood live and work in this market. They know the difference between a 1970s ranch with original ductwork and a newer build with a tight envelope. They know what Redwood’s humidity does to a heat pump coil in August. And they answer to Marco directly.
Every technician who shows up is background-checked and uniformed. You know who is coming before they arrive. If you call at 2 a.m. because your heat pump died during a rare cold snap, a live person answers. Not a voicemail. Not a callback window.
Ductless Heat Pump Installation in Redwood
Ductless heat pump installation in Redwood is the right call for homes where running ductwork would mean tearing out ceilings or sacrificing closet space, and it’s a job we handle regularly. A ductless system, often called a mini split, pairs an outdoor condensing unit with one or more indoor air handlers mounted on the wall or ceiling. No ducts. No asbestos-wrapped trunk lines to replace. The indoor units move refrigerant through small line sets that run through a three-inch opening in the wall.
In Redwood, ductless systems make particular sense for older homes where original ductwork is leaky, undersized, or running through a hot attic that robs conditioned air before it reaches your living room. They also work well for garage conversions, sunrooms, and additions where extending the existing duct system would throw the whole house out of balance.
Single-Zone Ductless Systems
A single-zone ductless heat pump serves one room or one defined area. In Redwood, we install these most often in converted garages, ADUs, and bonus rooms that never cool properly. The job typically takes a day, and you get independent temperature control for that space without touching your main system.
Multi-Zone Ductless Systems
A multi-zone ductless setup runs up to eight indoor units off a single outdoor condenser. For a Redwood homeowner who wants room-by-room control without ductwork, this is the option that gets discussed most. Each indoor unit has its own thermostat, so you are not cooling bedrooms to 72 degrees just to keep the living room tolerable.
Heat Pump Service in Redwood
Heat pump service in Redwood covers the maintenance and repair work that keeps an existing system running through the long cooling season and the occasional hard cold snap. A heat pump is a single unit that moves heat both directions: it pulls heat out of your house in summer and pulls heat in during winter. Because Redwood runs the cooling cycle for eight or nine months of the year, the compressor, reversing valve, and outdoor coil take a beating.
Seasonal tune-ups and thermostat calibration in Redwood run $80 – $200, and a heat pump repair typically lands between $150 and $650 depending on the part. A failed capacitor is cheap. A failed compressor is not, and at that point you are having an honest repair-versus-replace conversation with Marco’s team instead of being steered into a sale.
Start-of-Season Heat Pump Tune-Up
Before a Redwood summer kicks in, the tune-up that matters is checking refrigerant charge by weight or subcooling, testing the defrost board, and measuring static pressure. Most of the heat pumps we see in Redwood have drifted out of charge from slow leaks, and a system running a pound low never delivers nameplate capacity. That shows up on your bill.
Emergency Heat Pump Repair
When a heat pump fails in July and your indoor temperature climbs past 85, that is a genuine emergency. We treat it that way. Call (361) 306-9515 any hour, day or night, and a live person answers. We give you a written repair price before any work starts, and the repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge.
Trusted Brands We Service in Redwood
Dalton Heating & Air installs and services heat pumps from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Redwood customers, we most often quote Trane and Carrier on full system replacements, with Goodman and Rheem as strong mid-range options when budget is the driving constraint. Our techs are factory-trained on all nine brands, which means the diagnostic call on a Trane or a Goodman starts from the same place: actual manufacturer specs, not a guess. We keep common Redwood parts stocked locally so a capacitor, contactor, or defrost board doesn’t mean a multi-day wait.
Common Heat Pump Installation Problems We See in Redwood Homes
- Short-cycling from oversized equipment. Some installers skip the load calculation and size by square footage alone. The heat pump ends up oversized for Redwood’s shoulder-season run times, short-cycles, and wears the compressor out years early. We size every system with a room-by-room load calculation.
- Duct static pressure choking the new blower. In older Redwood homes, the existing ductwork often has static pressure high enough to strangle a new heat pump’s blower motor. The unit never delivers nameplate capacity, and the homeowner blames the equipment instead of the ductwork. We test static pressure before we ever quote a replacement.
- Refrigerant charge set by gauge pressure instead of weight or subcooling. When a charge is set by rule of thumb, the condenser coil and evaporator coil never balance the way the manufacturer rated them. Efficiency drops, the compressor runs hotter, and the system fails early. We charge by weight or subcooling, always.
- Thermostat mismatch. A new variable-speed heat pump paired with a basic single-stage thermostat never runs the way it should. The unit never stages properly, comfort suffers, and the efficiency rating on the box means nothing. We include thermostat calibration on every install.
Pricing for Heat Pump Installation in Redwood, TX
Here is what heat pump work actually costs in Redwood right now, based on the jobs we quote week to week:
| Job | Price Range |
|---|---|
| Heat pump installation (full system) | $3,500 – $7,500 |
| Heat pump repair | $150 – $650 |
| Seasonal tune-up / thermostat calibration | $80 – $200 |
What moves a full system from the low end to the high end: ductwork condition, system efficiency rating, whether you want a communicating thermostat, and whether we’re installing a single-stage or variable-speed unit. What does not move the price: the day of the week, the salesperson’s mood, or how much you seem willing to spend. Every Redwood quote is a written price before any work begins. Call (361) 306-9515 for an exact quote. Estimates are free.
Redwood’s inland location means hard freezes are rarer than in the Hill Country just west of town, but the longer, hotter cooling season still makes heat pump installations here heavily heating-vs-cooling weighted. Install decisions should be sized for the local cooling hours, not a generic Texas average. A system sized for Dallas cooling loads will short-cycle in Redwood from March through October.
One example from the field: our tech was called out to a 1970s single-story in the Oak Hollow area where the old single-stage system short-cycled through July. We did a room-by-room load calculation, found the duct static pressure high enough to choke airflow, resized the ductwork, and set a new Carrier heat pump with a matched air handler and thermostat calibration. The homeowner got a system that runs longer, quieter cycles and dehumidifies the way a Redwood summer demands.
We Also Serve Cities Near Redwood
Our Heat Pump Installation team handles full-system replacements, ductless installs, and repair work for Redwood and the surrounding metro. We regularly serve customers in Houston, San Antonio, Dallas, and Fort Worth. If you’re in Redwood or a nearby city, the same written-price standard applies on every job, no exceptions.
Serving Redwood, TX - Our Local Coverage Area
We’re based in the Redwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Redwood
Yes, you need a load calculation, and no, you should not match your old tonnage. A Manual J load calculation measures your home’s actual cooling and heating demand based on square footage, window orientation, insulation levels, air leakage, and local Redwood climate data. Matching your old tonnage assumes the last installer did the math correctly, and after years of seeing systems in Redwood that were oversized from day one, we don’t make that assumption. An oversized heat pump short-cycles, never dehumidifies properly, and wears the compressor early. A load calculation takes a few hours and it changes the quote. Call (361) 306-9515 and we’ll schedule one.
SEER2 is the updated efficiency rating that reflects real-world operating conditions, including static pressure from your ductwork, rather than ideal lab conditions. The practical effect for a Redwood home: a 16 SEER2 heat pump uses roughly 15 – 25% less electricity than a 10 SEER unit that was installed fifteen years ago, depending on how hot the summer runs and how tight your ductwork is. On a $250 summer electric bill, that’s $40 – $60 a month back in your pocket. The bigger variable in Redwood is whether the system was installed with correct airflow and correct refrigerant charge. A 20 SEER2 heat pump installed badly will lose to a 14 SEER2 installed right.
Yes. Ductless heat pump installation in Redwood is exactly what we discussed above: an outdoor condensing unit paired with wall or ceiling-mounted indoor air handlers, connected through a small line set. Homes without existing ductwork, or homes where existing ductwork is leaky and undersized, are the best candidates. The job usually takes one to two days, and you get room-by-room temperature control without tearing into walls or ceilings. Call (361) 306-9515 for a free estimate on a ductless system sized for your specific Redwood home.
Running but not cooling is usually a repair, not a replacement. The most common causes we see in Redwood are low refrigerant charge from a slow leak, a failed capacitor, a dirty outdoor coil, or a reversing valve stuck between modes. A repair in Redwood runs $150 – $650 depending on the part. Replacement becomes the honest conversation when the compressor fails or the system is more than 12 – 15 years old and leaking refrigerant faster than it can be topped off. We give you a written repair price before any work, and the repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge. Call (361) 306-9515 and we’ll diagnose it properly.
We install and service heat pumps from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Redwood homes, we most often quote Trane and Carrier on full system replacements, with Goodman and Rheem as solid mid-range options. Every install starts with the same load calculation and the same written-price standard, regardless of brand. Our techs are factory-trained on all nine lines, so the service you get on a Goodman is the same service you get on a Lennox. Call (361) 306-9515 to talk through which brand fits your home and budget.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Redwood and the surrounding areas.